• Journal of the Korean Geotechnical Society
• /
• v.33 no.2
• /
• pp.27-34
• /
• 2017

Various earth retaining wall methods were used on the domestic construction sites and a cast in place pile (C.I.P) method was mostly applied at deep excavation. Because of a lot of shortcomings in the C.I.P method, a new method using PHC-W earth retaining wall was developed. The earth retaining wall method using PHC-W piles has a lot of advantages including that it is safer than other earth retaining wall methods due to uniform quality and high rigidity. PHC-W was designed to effectively resist lateral earth pressure by alternating cross section of PHC pile. And increment of bending moment and shear strength were verified through KS F 4306 tests, and were increased by 42% and 98% more than KS standards.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.3
• /
• pp.234-239
• /
• 2015

Non-Negative Matrix Factorization (NMF) is a method for updating dictionary and gain in alternating manner. Due to ease of implementation and intuitive interpretation, NMF is widely used to detect and separate overlapping sound events. However, NMF that utilizes non-negativity constraints generates parts-based representation and this distinct property leads to a dictionary containing fragmented acoustic events. As a result, the presence of shared basis results in performance degradation in both separation and detection tasks of overlapping sound events. In this paper, we propose a new method that utilizes K-Singular Value Decomposition (K-SVD) based dictionary to address and mitigate the part-based representation issue during the dictionary learning step. Subsequently, we calculate the gain using NMF in sound event detection step. We evaluate and confirm that overlapping sound event detection performance of the proposed method is better than the conventional method that utilizes NMF based dictionary.

• Journal of the Korean Society of Industry Convergence
• /
• v.17 no.3
• /
• pp.93-102
• /
• 2014

Recently the interest in permanent magnet alternating motor using for electric compressor become great. Especially the research on Interior Permanent Magnet Motor has been doing actively for its advantages in the energy density and the efficiency. In order to control the output of motor to the desired value, the current control or speed control of motor are required. The accurate detection of rotor position and speed information are necessary for the control of motor. In general, the encoder, hall sensor, and resolver are used to obtain the information of motor position and speed and the speed detection algorithm, M/T method, is applied. However, the M/T method causes the error depending on rotor speed. Therefore, this M/T speed detection method is not perfect. In this paper, it is proposed that the PI control with a 1st transfer function and the integration element between velocity and position are composed in series and this feeds back to the reference value of position angle. The proposed algorithm is a function of the integral elements 2nd term, speed element, is used as an output. Thus, it is possible to detect the correct speed by configuring like the mechanical structure similarly. The proposed algorithm is verified by using PSIM DLL and is applied to the BLAC motor drive. And also it is confirmed that this system estimates the accurate speed regardless of rotor speed changes. As a example, the experimental results and simulations shows that the proposed method is very effective.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.5
• /
• pp.522-533
• /
• 2019

The compressive sensing model for range-Doppler estimation can be expressed as an under-determined linear system y = Ax. To find the solution of the linear system with the compressive sensing method, matrix A should be sufficiently incoherent and x to be sparse. In this paper, we propose a transmission waveform design method that maintains the bandwidth required by the sonar system while lowering the mutual coherence of the matrix A so that the matrix A is incoherent. The proposed method combines two methods of optimizing the sensing matrix with the alternating projection and suppressing unwanted frequency bands using the DFT (Discrete Fourier Transform) matrix. We compare range-Doppler estimation performance of existing waveform LFM(Linear Frequency Modulated) and designed waveform using the matched filter and the compressive sensing method. Simulation shows that the designed transmission waveform has better detection performance than the existing waveform LFM.

• Steel and Composite Structures
• /
• v.37 no.6
• /
• pp.663-678
• /
• 2020

This paper proposes a novel topology optimization method generating multiple materials for external linear plane crack structures based on the combination of IsoGeometric Analysis (IGA) and eXtended Finite Element Method (X-FEM). A so-called eXtended IsoGeometric Analysis (X-IGA) is derived for a mechanical description of a strong discontinuity state's continuous boundaries through the inherited special properties of X-FEM. In X-IGA, control points and patches play the same role with nodes and sub-domains in the finite element method. While being similar to X-FEM, enrichment functions are added to finite element approximation without any mesh generation. The geometry of structures based on basic functions of Non-Uniform Rational B-Splines (NURBS) provides accurate and reliable results. Moreover, the basis function to define the geometry becomes a systematic p-refinement to control the field approximation order without altering the geometry or its parameterization. The accuracy of analytical solutions of X-IGA for the crack problem, which is superior to a conventional X-FEM, guarantees the reliability of the optimal multi-material retrofitting against external cracks through using topology optimization. Topology optimization is applied to the minimal compliance design of two-dimensional plane linear cracked structures retrofitted by multiple distinct materials to prevent the propagation of the present crack pattern. The alternating active-phase algorithm with optimality criteria-based algorithms is employed to update design variables of element densities. Numerical results under different lengths, positions, and angles of given cracks verify the proposed method's efficiency and feasibility in using X-IGA compared to a conventional X-FEM.

• Journal of Platform Technology
• /
• v.11 no.3
• /
• pp.68-75
• /
• 2023

This paper discusses methods for increasing the germination rate of barley seeds using low direct and alternating current power below 110V. The experimental apparatus used here is a parallel plate, with the bottom surface of the plate designed to be wider than the top surface to increase the size of the electrostatic field. As a result, three different magnitudes of electrostatic fields were created on the plates: the first ranging from 400V/cm to 600V/cm, the second from 600V/cm to 900V/cm, and the third from 2200V/cm to 2400V/cm. The finite difference method was applied to analyze the electrostatic field inside the parallel plate. The plant seeds used in the experiments were barley seeds produced domestically. The average germination rate of barley seeds using the presented electrostatic field in this paper was 57%, while it was 65% when using a microwave of 2.45GHz, compared to a control group with a result of 31%. An important difference between using the electrostatic field and the 2.45GHz microwave is the dry method and wet method. When applying these two methods to practical seed germination, it is necessary to consider the advantages and disadvantages of each experimental approach and choose the appropriate method accordingly.

• The Journal of Korea Robotics Society
• /
• v.18 no.1
• /
• pp.1-9
• /
• 2023

This paper presents an optimal path planning strategy for aerial searching and surveying of a user-designated area using multiple Unmanned Aerial Vehicles (UAVs). The method is designed to deal with a single unseparated polygonal area, regardless of polygonal convexity. By defining the search area into a set of grids, the algorithm enables UAVs to completely search without leaving unsearched space. The presented strategy consists of two main algorithmic steps: cellular decomposition and path planning stages. The cellular decomposition method divides the area to designate a conflict-free subsearch-space to an individual UAV, while accounting the assigned flight velocity, take-off and landing positions. Then, the path planning strategy forms paths based on every point located in end of each grid row. The first waypoint is chosen as the closest point from the vehicle-starting position, and it recursively updates the nearest endpoint set to generate the shortest path. The path planning policy produces four path candidates by alternating the starting point (left or right edge), and the travel direction (vertical or horizontal). The optimal-selection policy is enforced to maximize the search efficiency, which is time dependent; the policy imposes the total path-length and turning number criteria per candidate. The results demonstrate that the proposed cellular decomposition method improves the search-time efficiency. In addition, the candidate selection enhances the algorithmic efficacy toward further mission time-duration reduction. The method shows robustness against both convex and non-convex shaped search area.

• Korean Journal of Weed Science
• /
• v.3 no.2
• /
• pp.137-142
• /
• 1983

The effects of various factors on germination of dormant Digitaria sanguinalis seeds were studied to obtain the basic informations on establishing an effective control method in upland crops. Germination of dormant seeds was most significantly promoted by light treatment, about 88-89%, and followed by the treatment of alternating temperatures (15 or 20$^{\circ}C$ to 35$^{\circ}C$), showing the similar effects like light. Removal of seed coats also increased germination of dormant seeds by 72%, next to the treatments of light and altering temperature. Potassium nitrate ($KNO_3$) at $10^{-2}M$ and concentrated sulfuric acid ($H_2SO_4$) treatment at the duration of 8 minutes resulted in 20% and 37.8% of germination of dormant seeds, respectively, which were significantly higher than that of the untreated control. Under the conditions of altering temperature, gibberellic acid (GA) at $10^{-3}M$ to $10^{-6}M$, benzylandenin (BA) at $10^{-4}$ to $10^{-7}M$ and their combination had no effect on breaking of dormant weed seeds, and instead inhibited the promotive effects induced by the alternating temperature. However, under the constant temperature at 35$^{\circ}C$ in dark, all these treatments increased germination as much as 20% over the untreated control.

• Korean Journal of Materials Research
• /
• v.14 no.2
• /
• pp.90-93
• /
• 2004

Silicon dioxide thin films were deposited on p-type Si (100) substrates by atomic layer deposition (ALD) method using alternating exposures of $SiH_2$$Cl_2$ and $O_3$ at $300^{\circ}C$. $O_3$ was generated by corona discharge inside the delivery line of $O_2$. The oxide film was deposited mainly from $O_3$ not from $O_2$, because the deposited film was not observed without corona discharge under the same process conditions. The growth rate of the deposited films increased linearly with increasing the exposures of $SiH_2$$Cl_2$ and $O_3$ simultaneously, and was saturated at approximately 0.35 nm/cycle with the reactant exposures over $3.6 ${\times}$ 10^{9}$ /L. At a fixed $SiH_2$$Cl_2$ exposure of $1.2 ${\times}$ 10^{9}$L, growth rate increased with $O_3$ exposure and was saturated at approximately 0.28 nm/cycle with $O_3$ exposures over$ 2.4 ${\times}$ 10^{9}$ L. The composition of the deposited film also varied with the exposure of $O_3$. The [O]/[Si] ratio gradually increased up to 2 with increasing the exposure of $O_3$. Finally, the characteristics of ALD films were compared with those of the silicon oxide films deposited by conventional chemical vapor deposition (CVD) methods. The silicon oxide film prepared by ALD at $300^{\circ}C$ showed better stoichiometry and wet etch rate than those of the silicon oxide films deposited by low-pressure CVD (LPCVD) and atmospheric-pressure CVD (APCVD) at the deposition temperatures ranging from 400 to $800^{\circ}C$.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.281-285
• /
• 2008

Ferritic stainless steel is used for parts of exhaust system of commercial vehicle, because it has such advantages as low price and high corrosion resistant compared with austenite stainless steel. Even though ferritic stainless steel has these merits, to manufacture multi-layer bellows with complex geometry, austenite stainless steel is being used in the industry, because of it's high ductility. However, recently, the mechanical property of the ferritic stainless is getting improved and alternating austenitic stainless steel. In this paper, the possibility of mass production of bellows made of ferritic stainless steel like MH1 and 443CT is studied. Tensile test and ridging test are carried out to observe mechanical properties of STS304, MH1 and 443CT. Forming analysis using FEM is performed to investigate plastic strain during forming process. Prototype bellows has been made using STS304, MH1 and 443CT, respectively, and fatigue tests are carried out to evaluate fatigue life of bellows.