• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1992.05a
• /
• pp.125-129
• /
• 1992

When relaxation time will be distributed, TSC observed in the experimental procedure was analysed by using a potential model having two equilibrium positions and equations of dielectric properties was derived. Calculation of distribution was made by matrix method and compared/confirmed values obtained by TSC and alternating current which have a correspondence with each other. In this measurement, distribution of activation energy and relaxation time was determined by TSC peak at around 147k/364 of which center is 10$\^$-4/ sec/10$\^$5/ sec respectively at room temperature and also obtained dielctric loss factor at the range of 10$\^$-7/-10$\^$5/Hz. It seems that low temperature peak is local dispersion and high temperature peak have a relation to dielectric transition of the material.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.362-365
• /
• 2001

The chalcogenide glasses of thin films have the superior property of photoinduced anisotrophy(PA). In this study, we observed the linear dichroism(D) using the irradiation with polarized He-Ne laser light, in the Ag/As$\sub$40/Ge$\sub$10/Se$\sub$15/S$\sub$35/ multi-layer. Mutilayer structures farmed by alternating metal(Ag) a chalcogenide(As$\sub$40/Ge$\sub$10/Se$\sub$15/S$\sub$35/). Such multilayer structures have a greater sensitivity to illumination and larger dichroism in comparison the conventional double layer structure. Also new phenomena are discovered. These results will be show a capability of new method that suggested more improvement of photoinduced anisotropy property.

• Proceedings of the KIEE Conference
• /
• 2004.05b
• /
• pp.105-108
• /
• 2004

This paper describes the influence of conducting particle in the coaxial cylindrical electrodes under alternating voltage condition investigated using breakdown electric field and electro magnetics simulation method. Simulated particle-location in GIS chamber were the particle on electrode, the particle on enclosure and free moving particle. As results, it was founded that in case of breakdown electric field of the GIS chamber, breakdown electric field of particle on electrode was the lowest, that of free moving particle was middle and that of particle on enclosure was the highest. And in case of the electric field analysis with particle locations, electric field of particle on electrode was the highest that of lifted particle was middle and that of particle on enclosure was the lowest. This results can offer a practical reference ra the insulation design of domestic GIS.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.1
• /
• pp.122-129
• /
• 2004

Finite element analysis was performed to analyze structural safety of a new heavy-duty direct injection diesel engine. A half section of the in-line 6-cylinder engine was selected as a computational domain. A mapping method was used to project heat transfer coefficients from CFD results of engine coolant flow onto the FE model. The accurate setting of thermal boundary condition on the FE model was expected to result in improved prediction of temperature, cylinder bore distortion, and stresses. Characteristics of high cycle fatigue were investigated by assuming the engine was operated under the following five loading conditions repeatedly; assembly force, assembly force with thermal loading, alternating maximum gas pressure loading at each cylinder combined with assembly force and thermal loading. Distribution of fatigue safety factor was calculated by using it Haigh diagram in which the maximum and the minimum stresses were selected from the five loading cases.

• Proceedings of the KIEE Conference
• /
• 2005.10c
• /
• pp.53-55
• /
• 2005

The signals of the eddy current testing(ECT) for the examination of the steam generator(SG) tubes in the nuclear power plant(NPP) determine the existence, size, and kind of defects using the variation of impedance signals when a testing coil, driven by alternating current, passes through the SG tube contains defects. The aim of this paper is building a database of the RPC probe signals on the basis of the sizes variation of defects and frequency variation of probe. In this paper 3-D numerical analysis of the ECT signals using the finite element method is performed. Through this study, it is shown variation of magnitude and phase of impedance according to variation of defect size and frequency. From the result of this paper, we can obtain the information which is useful in defect discrimination of SG tube in nuclear power plant.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1071-1073
• /
• 2005

This paper investigates magnetic field behavior and its iron losses in the stator core using electrical steels. The analysis model is a brushless motor with the permanent magnet. The elliptical rotating and alternating flux distributions with non-sinusoidal waveforms are obtained by Finite Element Method and then their harmonic components are extracted. Based on these results, the local iron losses in the stator core caused by the harmonic flux are calculated. Furthmore, this paper explains the relation between the complex flux waveform and iron loss produced in each part of the stator core.

• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.52-54
• /
• 1998

LOA is the linear electromechanical device that mover is similar to secondary conductor of LIM. The mover reciprocates along stroke by supplying the alternating current to primary coil. LOA is the simpler and more efficient than other linear apparatus using the rotary motor because LOA produce the thrust force without any mechanical converter such as cam, clutch, belt, rack and pinion, etc. This paper deals with the static characteristics of moving coil type LOA by virtual work method, FEM analysis and experiment Results show that thrust force increases when mover travels form center to both ends.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.171-173
• /
• 2004

This paper presents the selection of optimal placement for STATCOM (Static synchronous Compensator) which is one of the FACTS (Flexible Alternating Current Transmission System) devices, considering line contingency. Line contingency ranking is gotten by using sensitivity of load margin. According to line contingency ranking line contingency was considered. And IOP (Index for selecting optimal Placement of STATCOM) is calculated by the variation of each bus's reactive mum for several line contingencies. The bus where has the biggest value of lOP is the most optimal placement to install STATCOM for voltage stability. IPLAN is used to program this part which get IOP. This study is carried out on the modified IEEE14 Bus Test System to confirm the efficiency of the method.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.25 no.3
• /
• pp.107-116
• /
• 2021

We introduce optimization algorithms using Bregman Divergence for solving non-negative matrix factorization (NMF) problems. Bregman divergence is known a generalization of some divergences such as Frobenius norm and KL divergence and etc. Some algorithms can be applicable to not only NMF with Frobenius norm but also NMF with more general Bregman divergence. Matrix Factorization is a popular non-convex optimization problem, for which alternating minimization schemes are mostly used. We develop the Bregman proximal gradient method applicable for all NMF formulated in any Bregman divergences. In the derivation of NMF algorithm for Bregman divergence, we need to use majorization/minimization(MM) for a proper auxiliary function. We present algorithmic aspects of NMF for Bregman divergence by using MM of auxiliary function.

• Journal of the Korean earth science society
• /
• v.44 no.4
• /
• pp.264-274
• /
• 2023

The Korea Strait comprises a continental shelf in a shallow sea that experienced glacio-eustastic sea-level changes during the Quaternary period. A long core of 76.6 m in length was acquired at the South Sea Drilling Project site (SSDP-101; 34°19.666'E and 128°16.335'N) with a 60 m water deep. The uppermost massive sand beds were interpreted as sandy sediments of the nearshore marine sand ridge in the shallow sea during the transgression of sea level, whereas the lower parts of alternating sandy and muddy beds were interpreted as deposits in marsh, estuary, and tidal flat environments. A three-layered geoacoustic model was reconstructed for the sedimentary succession in the high-resolution seismic profile based on a 140-grain size and sediment type of core SSDP-101. For the actual underwater simulation and experiments, the in-situ P-wave speeds were calculated using the sound speed ratio of the Hamilton method.