• Journal of Technologic Dentistry
• /
• v.42 no.3
• /
• pp.248-253
• /
• 2020

Purpose: This study aimed to verify whether blended learning is worth alternating with traditional face-to-face learning for some dental technology students in practice teaching. Methods: A total of 68 students were included in this study. They were divided into two groups to compare blended learning and traditional face-to-face learning. The experiment had been carried out over 15 weeks. The following tests were performed: test of instructional quality, test of learning satisfaction, test of perceived usefulness, and test of learning flow. The IBM SPSS software was used to analyze the data. Results: The learning satisfaction and the perceived useful of blended learning by students appeared to be higher than that of traditional face-to-face learning. However, there was no significant difference in the variables of traditional face-to-face learning and those of blended learning (p<0.05). Conclusion: Blended learning is an alternative to traditional face-to-face learning for some dental technology students in practice teaching.

• Journal of the Korean Electrochemical Society
• /
• v.1 no.1
• /
• pp.24-27
• /
• 1998

Electroluminescence (EL) comes from the light emission obtained by the electrical excitation energy passing through a phosphor layer undo. an applied high electrical field $(10^6 V/cm)$. The preparation of white and blue phosphors and characterizations of light emitting alternating current powder electroluminescent devices (ACPELDs) were investigated. In this work, we fabricated two kinds of ELDs, that is, yellow electroluminescent device (B-ELD), blue electroluminescent device (B-ELD). The basic st.uctures of Y-ELD and B-ELD are ITO (Indium Tin Oxide)/phosphor layer/Insulator layer/Carbon electrode and ITO/Phosphor layer/Insulating layer/carbon electrode, respectively. Another structures of ITO/Phosphor and Insulator mixture layer/Backelectrode are introduced. EL spectra and luminance of two types of ELDs were measured by changing voltage at fixed frequency 0.4kHz, 1.5kHz. Blue and yellow phosphors prepared in this work show $50cd/m^2\;and\;30cd/m^2$ of luminance at 400Hz, 150V.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.679-686
• /
• 2002

Based on the alternating series expansion of error probability function due to phase noise in PSK systems, the performance evaluations for Tikhonov and Gaussian probability density functions were performed in this paper. The range of the signal-to-noise ratio of recovered carrier signal which provides the same dependency between the error performances by Tikhonov function and Gaussian function was analyzed via loss evaluation due to phase noise. The phase noise with 1/f$^2$ characteristic was generated based on the relationship of the phase noise spectral density and the modulation index for frequency modulation signal. Using the generated phase noise as the input signal for digital satellite communication receiver, the performance losses due to the phase noise were measured and evaluated with the analyzed performance characteristics.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.6
• /
• pp.1665-1668
• /
• 2010

The spin exchange interactions of $(VO)_2(H_2O){O_3P-(CH_2)_3-PO_3}{\cdot}2H_2O$ were examined by spin dimer analysis based on extended Huckel tight binding method. The strongest spin exchange interaction occurs through the super-superexchange path $J_2$ and the second strongest spin exchange interaction occurs through the superexchange interaction path $J_1$. There are two strongly interacting spin exchange paths in $(VO)_2(H_2O){O_3P-(CH_2)_3-PO_3}{\cdot}2H_2O$. Therefore, magnetic susceptibility curve of $(VO)_2(H_2O){O_3P-(CH_2)_3-PO_3}{\cdot}2H_2O$ can be well reproduced by an alternating onedimensional antiferromagnetic chain model rather than an isolated spin dimer model.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.2
• /
• pp.309-314
• /
• 2009

New poly(arylene-ethynylene)s with silicon-containing ferrocene moiety in the polymer main chain were synthesized via the C-C bond forming reactions of 1,1´-bis(ethynyldimethylsilyl)ferrocene and various aromatic dihalides in high yields. The aromatic dihalides include 1,4-dibromobenzene, 4,4´-dibromobiphenyl, 9,10-dibromoanthracene, 2,5-dibromopyridine, 2,5-dibromothiophene, and 2,6-diiodo-4-nitroaniline. The polymer structures and properties were characterized by such instrumental methods as NMR $(^1H-,\;^{13}C-,\;and\;^{29}Si-)$, IR, UV-visible spectroscopies and TGA/DSC. The spectral data indicated that the present polymers have the regular alternating structure of 1,1´-bis(ethynyldimethylsilyl)ferrocenylene and arylene units. The resulting polymers were completely soluble in such organic solvents as methylene chloride, chloroform, benzene, chlorobenzene, and THF. The thermal behaviors of the resulting polymers were examined.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.2
• /
• pp.85-90
• /
• 1998

This paper describes the breakdown characteristics of GIS by the free conducting particles under alternating voltage. If the conducting particles are present within the GIS, they can cause decrease in breakdown voltages. Various materials and sizes of free conducting particles were used to study the liftoff electric field and breakdown voltage. The measured lift-off electric fields were compared with the calculated ones for copper, steel and aluminium wire-type conducting particles. As an experimental result, it is shown that the breakdown voltages of the GIS chamber with conducting particles were lower than those without conducting particles, and were markedly dependent on the particle material and the particle sizes. Free conducting particles are important factor in particle-triggered breakdown of the GIS.he GIS.

• Journal of Korean Port Research
• /
• v.13 no.2
• /
• pp.419-426
• /
• 1999

It is essential for port planning, coastal zone management and environmental impact study to analyze the variation of current and water quality due to the development of water area and discharged water from estuary barrage and basin etc. Mokpo sea area downstreams from a long river and two large basins, the Yongsan river and Yongam-Kumho basins discharging much of water through water gates for the purpose of flood control and prohibition of salt intrusion to the inland fresh water area. In this study, the numerical calculations were carried out for the analysis of diffusion characteristics due to discharging operation, adapting the results of tidal current simulation ADI methord is applied to the governing equation for the movement of sea water and diffusion and 6-point method to the advection terms of diffusion equation. As the results of this study, it is known that the discharging operation causes increasing and/or decreasing of current velocity and enlarging and/or depressing of pollutant diffusion limits depending on the distance from the discharging gates and the mode of discharging operation. To utilize these result, the linked gate operation and the method increasing exchange of sea water must be considered.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.23 no.5
• /
• pp.299-304
• /
• 2018

An ideal circuit breaker should supply electric power to loads without losses in a conduction state and completely isolate the load from the power source by providing insulation strength in a break state. Fault current is relatively easy to break in an Alternating Current (AC) circuit breaker because the AC current becomes zero at every half cycle. However, fault current in DC circuit breaker (DCCB) should be reduced by generating a high arc voltage at the breaker contact point. Large fire may occur if the DCCB does not take sufficient arc voltage and allows the continuous flow of the arc fault current with high temperature. A semiconductor circuit breaker with a power electronic device has many advantages. These advantages include quick breaking time, lack of arc generation, and lower noise than mechanical circuit breakers. However, a large load capacity cannot be applied because of large conduction loss. An extinguishing technology of DCCB with polymeric positive temperature coefficient (PPTC) device is proposed and evaluated through experiments in this study to take advantage of low conduction loss of mechanical circuit breaker and arcless breaking characteristic of semiconductor devices.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.41-44
• /
• 1999

Displacement current was generated in the pressure stimulus and light stimulus. Solution of azobenzene molecules (8A5H) have to character trans-to-cis. Pressure stimulus generate in the pressure and current. light stimulus generate in the displasement current. The Maxwell displacement current measuring technique has been applied for the investigation of azobenzene organic thin films under alternating photoirradiation with ultraviolet(360nm) and visible (450nm) light. The displacement current was generated due to the trans-to-cis photoisomerization by irradiation with ultraviolet light(λ$_1$=360 nm) Whereas the displacement current was generated in the opposite direction due to the cis-to-trans photoisomerization by irradiation with visible light(λ$_2$=450nm). As result, To show twice reaction certainly phase transition in pressure. A first range generated from 24$\AA$$^2$ to 29$\AA$$^2$and second range generated from 20$\AA$$^2$to 24$\AA$$^2$. Also, cetainfy stimulus apper low pressure and high pressure in photoirradiation. To see different every moment phase transition.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.2107-2109
• /
• 2000

A pulsed Nd:YAG laser is used widely for materials processing and medical instrument. It's very important to control the laser energy density in those fields using a pulsed Nd:YAG laser. A pulse repetition rate and a pulse width are regarded as the most dominant factors to control the energy density of laser beam. In this paper, the alternating charge and discharge system was designed to adjust a pulse repetition rate This system is controlled by microprocessor and allows to replace an expensive condenser for high frequency to cheap one for low frequency. In addition, The microcontroller monitors the flow of cooling water, short circuit. and miss firing and so on. We designed Nd:YAG laser firmware with smart microcontroller, and want to explain general matters about the firmware from now.