• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.147-149
• /
• 1994

In designing high efficiency electrical machines, calculation of iron loss is very important. And it is reported that in the induction motor and in the T-joint of 3 phase transformer, there occurred rotational magnetic field and much iron loss is generated owing to this field. In this paper, rotational power loss in the electrical machine under rotational magnetic field is discussed. Until now, loss analysis is based on the magnetic properties under alternating field. And with this one dimensional magnetic propertis, it is difficult to express iron loss under rotational field. In this paper, we used two dimensional magnetic property data for the numerical calculation of rotational power loss. We used finite element method for calculation and the analysis model is two dimensional magnetic property measurement system. We used permeability tensor instead of scalar permeability to present two dimensional magnetic properties. And in this case, we cannot uniquely define energy functional because of the asymmetry of the permeability tensor, so Galerkin method is used for finite element analysis.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1540-1542
• /
• 1997

Plasma polymerized thin films were fabricated by interelectrode capacitively coupled type apparatus. FT-IR analyses indicated that the thin film spectra are composed not only of the corresponding monomer bands but also of several new bands. Relative dielectric constant and dielectric loss tangent of thin films fabricated in the discharge power of 90[W] showed $3.212{\sim}3.805$ and $0.0026{\sim}0.0451$ in alternating frequency of $10^3{\sim}10^6$[Hz]. Contact angle measurement indicated that cross-link of the films is increased with the discharge power.

• Proceedings of the IEEK Conference
• /
• 2001.06d
• /
• pp.155-158
• /
• 2001

A new method for simultaneous multiple transmit focusing using orthogonal weighted FM chirp is proposed. Weighted chirp signals focused at different depths are transmitted at the same time. These chirp signals are mutually orthogonal in the approximate sense that the autocorrelation function of each signal has a narrow mainlobe width and low sidelobe levels, and the crosscorrellation function of any pair of the signals has smaller values than the sidelobe levels of each autocorrelation function. This means that each weighted chirp signal can be separately compressed into a short pulse, focused individually and combined with other focused beams to form a frame of image. Theoretically, any two chirp signals defined in two nonoverlapped frequency bands are mutually orthogonal. In the present work, however, a fractional overlap of adjacent frequency bands, by up to 25%, were permitted to design more chirp signals within a given transducer bandwidth. The crosscorrelation values due to the frequency overlap could be reduced by alternating the direction of frequency sweep of the adjacent chirp signals. The simulation results show that this method can improve the lateral resolution of image without sacrifice in the frame rate compared with the conventional pulse system.

• Journal of the Korea Society of Computer and Information
• /
• v.4 no.4
• /
• pp.185-192
• /
• 1999

In this paper. for $\pi$/4 and $\pi$/8 PSK. we proposed to condition to obtain coding gain increasing states, by design encoder of analytical method with minimal complexity in limited bandwidth and power channels. In order to improve the bit error rate(BER), comparing Ungerboeck designed the TCM. we propose MTCM(Multiple trellis-coded modulation) with multiplicity(k＝2), by optimum encoder design. By design encoder of analytical method. the trellis encoder can be minimal complexity and the decoder be used Viterbi decoder(MLSE). When compared to the TCM and MTCM with AWGN channels. the condition of performance enhancement of the MTCM with multiplicity(k＝2) is the case of parallel transition in TCM systems. without alternating data transmission rate in bandwidth and power limited channels.

• Korean Journal of Plant Taxonomy
• /
• v.41 no.2
• /
• pp.164-170
• /
• 2011

Two naturalized plants (Euphorbiaceae) were recorded from Busan Metropolitan City and from the Jeju Special Self-Governing Province. Euphorbia heterophylla L. (A-me-ri-ka-dae-geuk) was found in a park near Suyeong-gang, Allak-dong, Dongnae-gu, in Busan Metropolitan City. This species is distinguished from E. dentata by its alternating leaves of main stem and glands of involucres with a circular opening. Euphorbia hirta L. (Teol-ttang-bin-dae) was found in Yerae village, Yerae-dong, Seogwipo-si, in Jeju Special Self-Governing Province. It is distinguished from E. hypericifolia as it has capsules with hairs.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.691-706
• /
• 2008

ATP(Automatic Train Protection) system in railway signaling system is the important one grasping the position and velocity of a train. The wayside transmitter of ATP system is installed between rails. In concrete slab track, the signal current using wayside transmitter of ATP system is influenced by reinforcing bars. The magnetic coupling between reinforcing bars and wayside transmitter of ATP system as a filter makes an input current distorted. So, it makes an alternating current signal with a desirable size not transmit to on-board system of a train. Way to decrease the distortion of an input current signal frequency is to avoid maximum induction current frequency. And the induction phenomenon between reinforcing bars insulated and wayside transmitter of ATP system does not occur. In this paper, we represent the model about wayside transmitter of ATP system and reinforcing bars on the concrete slab tracks, and calculated the parameters demanded for the model. Also, we demonstrated it through the Maxwell program. Furthermore, we calculated impedance on wayside transmitter used in KVB system and ERTMS/ETCS system which are a kind of ATP system, frequency response of induction current, using the Matlab, and demonstrated the validity of it, using the PSpice program.

• Journal of the Optical Society of Korea
• /
• v.19 no.5
• /
• pp.449-455
• /
• 2015

In this study we propose a new photonic crystal fiber (PCF) design that simultaneously offers broadband single-mode operation, high birefringence, and large normal dispersion in the optical-communication wavelength regime. The waveguide is based on a hybrid square-lattice PCF (HS-PCF) that has circular air holes of two different diameters alternating in the cladding, plus a pure silica defect at the center. The optical properties of the guided modes are analyzed numerically by the finite-element method (FEM) with a perfectly matched layer as the boundary condition. The optimized HS-PCF has a dispersion coefficient of $-601.67\;ps\;nm^{-1}\;km^{-1}$ and a high birefringence of $1.025{\times}10^{-2}$ at $1.55{\mu}m$. In addition, over the S+C+L+U wavelength bands the proposed HS-PCF with ultraflat birefringence with a slope on the order of $10^{-5}$.

• Korean Journal of Materials Research
• /
• v.27 no.1
• /
• pp.8-11
• /
• 2017

Binary Ti-Al alloys containing 50 to 60 atomic percent aluminum are rapidly solidified by hammer anvil method under an argon atmosphere. Constituent phases in each alloy are identified by X-ray diffractometry and microstructures of the alloys are investigated using a transmission electron microscope. In alloys with aluminum content between 50 and 54 percent, a second phase exists besides TiAl(${\gamma}$); this second phase is identified as $Ti_3Al$(${\alpha}2$). The ${\alpha}2$ phase is observed in two types of morphology. One is as fine lamellar alternating with ${\gamma}$ and the other is as a particle. It is concluded that the existence of a metastable phase with the morphologies stated above should arise from a higher quenching rate attained by the hammer anvil method as compared to the conventional roll or splat-quench method. Implications of the above observation are discussed with respect to the phase relations in the Ti-Al binary system; these implications are still controversial in many respects.

• Macromolecular Research
• /
• v.10 no.4
• /
• pp.230-235
• /
• 2002

Alternating polyols of oxymethylene and oxyalkylene were synthesized and used as precursors for thermoplastic poly(ether-ester) elastomers (TPEs). The polyols were synthesized by reacting diols having different methylene units with dichloromethane in the presence of a phase transfer catalyst. The number of methylene units in the alkylene oxides was varied from 3 to 6. TPEs were prepared using the polyols as soft segments and poly(butylene terephthalate) units as hard segments. The polyols and TPEs synthesized were characterized using FTIR, NMR, GPC, DSC, and polarized optical microscopy. The polyols showed a profound odd-even effect on the melting (T$_{m}$) and glass transition temperatures (T$_{g}$). Polyols with odd numbers of methylene groups in the alkylene units have higher transition temperatures than polyols with odd number of methylene groups. The tendency is still kept in TPEs, even though the T$_{g}$ of soft segment in TPEs are slightly higher than those of corresponding neat polyols. The T$_{m}$ and T$_{g}$ of soft segments are almost constant in the range of 20 to 60 wt % contents of soft segments. On the other hand, the normalized heat of fusion of hard segment decreased with increasing the content of loft segment.ent.t.ent.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.1
• /
• pp.91-96
• /
• 2017

One of the most critical aspects of the modern semiconductor industry is the quality of wafer surface, the roughness of which is mostly caused by the ingot slicing. And the grinding is supposed to be the main process to reduce the surface roughness. The vibrations of the disc surface grinder are the major problem to effectively achieve the required surface quality. In this study, the structure of a disc surface grinder was analyzed through the experiment and the computer simulation to investigate the dynamic characteristics of the machine, and further to alter the design for the improved stability. The result of the study shows that simple design alterations without alternating main body can effectively suppress the vibrations of the machine.