• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.7C
• /
• pp.743-754
• /
• 2006

In the proposed method, two regular laser working at two different wavelengths perform moving object detection alternatively in time. The laser intensity and the beaming period of each laser is equally maintain as to the single laser radar, hence, externally, dual beam lasers radar works exactly same as the single beam laser radar except that the proposed dual lasers radar needs additional post-processing of received signals in the receiver. To verify the robustness of the proposed method, a set of computer simulation has been performed. The communication channel is assumed to be additive white Gaussian noise, and the perfect synchronization is assumed. All other simulation parameters such as signal power and signalling period are equally maintain in both systems while the signal processing time such as spreading and filtering are expected to be trivial in call cases.

• 한국전산유체공학회:학술대회논문집
• /
• 2010.05a
• /
• pp.551-555
• /
• 2010

Electrowetting is a versatile tool to handle tiny droplets and forms a backbone of digital microfluidics. Numerical analysis is necessary to fully understand the dynamics of electrowetting, especially in designing electrowetting-based devices, such as liquid lenses and reflective displays. We developed a numerical method to analyze the general contact-line problems, incorporating dynamic contact angle models. The method is based on the conservative level set method to capture the interface of two fluids without loss of mass. We applied the method to the analysis of spreading process of a sessile droplet for step input voltages and oscillation of the droplet for alternating input voltages in electrowetting. The result was compared with experimental data. It is shown that contact line friction significantly affects the contact line motion and the oscillation amplitude. The pinning process of contact line was well represented by including the hysteresis effect in the contact angle models. In level set method, in the mean time, material properties are made to change smoothly across an interface of two materials with different properties by introducing an interpolation or smoothing scheme. So far, the weighted arithmetic mean (WAM) method has been exclusively adopted in level set method, without complete assessment for its validity. We viscosity, thermal conductivity, electrical conductivity, and permittivity, can be an alternative. I.e., the WHM gives more accurate results than the WAM method in certain circumstances. The interpolation scheme should be selected considering various characteristics including type of property, ratio of property of two fluids, geometry of interface, and so on.

• Journal of Korea Foundry Society
• /
• v.26 no.5
• /
• pp.205-210
• /
• 2006

The structural control of Al-Si alloy, which was not studied among various electromagnetic processing of materials, was considered applying the alternating current and direct current magnetic flux density. The main aim of the present study is to investigate the effects of electromagnetic vibration on the macro and microstructure of Al-Si alloy in order to develop a new process of structural control in Al-Si alloy. When the electromagnetic vibration is conducted for changing the shape of primary aluminum, at low frequency(>60Hz), the shape of dendrite is changed speroidal shape. When the electromagnetic vibration is conducted for changing the shape of eutectic silicon, the fact that a morphological change of the eutectic silicon from coarse platelet flakes to fine fiber shape is observed and the improvement of the mechanical properties is achieved with EMV (Electro Magnetic Vibration) process at high frequency(>500Hz).

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.1
• /
• pp.163-172
• /
• 1990

The filter criteria of geotextiles to prevent excessive loss of fine particles in cohesion-less soils are largely depend on the flow conditions of water in soil/geotextile systems. In the soil/geotextile system under uni-directional flow conditions, it is adequate to retain only the coarse soil fraction because a 'self-induced' soil filter layer may form in cohesionless soil adjacent to the geotextile. In alternating flow conditions, however, a complete soil filter layer within the soil will not form and thus the geotextile pores must be small enough to retain finer particles of the soil to be protected. Based on these concepts, theoretical filtration criteria of geotextiles are developed considering the flow conditions of water. To test the validity of these criteria, laboratory testing was carried out. This indicated that large losses of fine particles would result, especially at high hydraulic gradients, short periods and low vertical loads. The revised filtration criteria are proposed evaluating effect of various design factors.

• Parasites, Hosts and Diseases
• /
• v.49 no.4
• /
• pp.449-455
• /
• 2011

We detected metacercariae of Echinostoma revolutum in Filopaludina sp. snails purchased from a local market in Nam Dinh Province for the first time in Vietnam. Adult flukes were harvested from experimentally infected hamsters at days 14 and 17 post-infection. The metacercariae were round, $170-190{\mu}m$ (n=15) in diameter, with a cyst wall thickness of about $12{\mu}m$. A total of 37 collar spines were arranged around the head collar, and large excretory granules were seen in 2 canals of the excretory bladder. The 14-day old adult flukes were elongated, ventrally curved, and $5.0-7.2{\times}0.8-1.3mm$ (n=20). The head collar had a total of 37 collar spines arranged in 2 alternating rows, including 5 corner spines on each side. The cirrus sac contained a saccular seminal vesicle, a prostatic gland, and an unarmed cirrus. Two tandem testes were smooth or slightly lobed. Eggs were ovoid to elliptical, $110-118{\times}70-75{\mu}m$. These morphological characters were similar to those of E. revolutum and E. jurini. We tentatively identified it as E. revolutum because the validity of E. jurini remains to be elucidated. The taxonomic relationship of E. revolutum and E. jurini is discussed.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.4
• /
• pp.609-620
• /
• 1992

A numerical solution of temperature and thermally induced stress in a wafer during rapid thermal processing (R.T.P) is obtained, and an analysis of onset and propagation of slip is performed and compared with experiment. In order to calculate temperature distribution of a wafer in R.T.P system, heat conduction equation that incorporated with radiative and convective heat transfer model is solved, and the solution of the equation is calculated numerically using alternating direction implicit (A.D.I) method. In dealing with radiative heat transfer, a partially transparent body that absorbs the radiation energy is assumed and this transparent body undergoes multiple internal reflections and absorptions. Two dimensional (assuming plane stress) thermoelastic constitutive equation is used to calculate thermal stress induced in a wafer and finite element method is employed to solve the equation numerically. The stress resolved in the slip directions on the slip planes of silicon is compared with the yield stress of silicon in order to predict the slip. The result of the analysis shows that the wafer temperature at which slip occurs is affected by the heating rate of the R.T.P system. It is observed that once slip occurs in the wafer, the slip grows.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.16 no.2
• /
• pp.86-94
• /
• 1996

In the life management safety evaluation of constructs base on a fracture mechanics, the size of defect is the very important parameter. ICFPD (Induced Current Focusing Potential Drop)technique has been developed for detecting and sizing of defects that exist not only on surface but also inside and interior of structural components. The principle of this technique is to induce a focusing current at an exploration region by a straight induction wire through which an alternating current (AC)flows that has constant amplitude and frequency. The potential distributed on the surface of metallic material is measured by potential pick-up pins that are settled on the probe. In this paper, this NDI technique was applied to the evaluation of surface cracks and blind cracks in plate specimens. The results of this study show that in the case of surface crack, the distribution of potential drop is varied with the inched angle of surface crack, and the potential drops in the crack region and the crack edge region are varied with the inclined angle and depth of crack. The distribution of potential drop for the blind crack is distingulished from that for the surface crack, and the potential drop in the crack region is varied with the depth of crack.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.2
• /
• pp.75-80
• /
• 2020

There are so many low power MAC protocols for wireless sensor network. IEEE802.15.4 among them has disadvantage of a large power consumption for synchronization. To save power consumption it use the superframe operation alternating sleep mode and awake mode. But latency is longer result from superframe operation. B-MAC can have shorter latency according to check interval. But transmitter consumes more power because of long preamble. And receiver is suffering from overhearing. In this paper, we use the adaptive check interval scheme[1] of B-MAC for enhancing the power consumption. Its maximum throughput and minimum delay is evaluated by comparing the proposed scheme with a typical single channel IEEE802.15.4.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.2
• /
• pp.309-311
• /
• 2005

Single crystals of the new pentanary thiophosphate, $K_{0.5}Ag_{0.5}Nb_2PS_{10}$ has been prepared through reactions of the elements with halide fluxes. The structure of $K_{0.5}Ag_{0.5}Nb_2PS_{10}$ has been analyzed by single crystal X-ray diffraction technique. The structure of $K_{0.5}Ag_{0.5}Nb_2PS_{10}$ is made up of one-dimensional ${^{\infty}_1}[Nb_2PS_{10}]$ chains along the [001] direction and these chains are separated from one another by $Ag^+$ and disordered $K^+$ ions. This chain is basically built up from bicapped trigonal prismatic [Nb2S12] units and tetrahedral [PS4] groups. The [$Nb_2S_{12}$] units are connected together to form the linear chain, ${^{\infty}_1}[Nb_2S_9]$ by sharing the S-S prism edge. Short (2.885(2) $\AA$ or 2.888(2) $\AA$) and long (3.743(1) $\AA$) Nb-Nb distances are alternating along the chain, and the $S_2{^2-}]\;and\;S^{2-}$anionic species are observed. The distorted octahedral coordination around the $Ag^+$ ion can be described as [2+4] bonding interaction.

• Korean journal of applied entomology
• /
• v.11 no.1
• /
• pp.31-35
• /
• 1972

1. Continuous light induced more conidia than alternating light and darkness treatment in isolate Chinju 1. Isolate Suwon 3 produced much more conidia on synthetic medium than Chinju 1 in light. Conidial formation in Suwon 3 increased remarkably with alternate light and darkness in 8 days incubation. 2. Light was essential for perithecial formation in Chinju 1. No matured perithecia were observed in Suwon 3 with any treatment. Abundant perithecia were produced in Chinju 1 but only perithecial initiation occurred in Suwon 3. Suwon 3 produced significantly more conidia than Chinju 1, while perithecial formation was reversed. 3. Conidial numbers in soil decreased significantly through the winter at 10, 30 and 50 per cent soil moisture, with the most striking decrease at 10 per cent levels, but the number recovered again beginning in March, regardless of the soil moisture. The above results provide us a useful clue to support the possbility the conidia may serve as a primary inoculum.