• 한국농공학회논문집
• /
• 제63권3호
• /
• pp.59-73
• /
• 2021

The purpose of this study is to investigate transition of pumping technology, irrigation water requirement, and unit area drainage discharge at the Pumping station-based Irrigation Associations (PIAs) in South Korea during Japanese colonial period (1910-1945). The PIAs established pumping stations and embankments along rivers for the purpose of irrigation, drainage and flood prevention until the mid-1920s. From the late 1920s after major river improvement projects, newly established PIAs did not include the flood prevention in their purpose of establishment. The design criteria of the irrigation and drainage projects, such as irrigation water requirements, design rainfall, and allowable ponding duration were decided according to the circumstances of PIAs. The gross irrigation water requirement of paddy fields increased from the 1920s to the 1940s, and reached the level of 0.0020 m³/s/ha (19 mm/d) in the 1940s for the fairly good irrigation status in the drought. The great floods of 1930, 1933, and 1934 triggered the increase in drainage discharge in the late 1930s, leading to the unit area drainage discharge of 0.9-2.6 m³/s/km² for natural drainage and 0.3-1.1 m³/s/km² for pump drainage. Therefore, several PIAs near the major rivers could avoid repetitive floods damage.

• 한국해양환경ㆍ에너지학회지
• /
• 제15권3호
• /
• pp.219-226
• /
• 2012

국제해사기구(IMO)는 선박평형수를 통한 수중생물의 이동을 막기 위해, 2004년 선박 평형수와 침전물 통제 및 관리를 위한 국제협약을 채택하였다. 34개 선박평형수 처리장치가 IMO 활성물질 승인을 받았고, 이 가운데 20개 처리장치가 최종승인을 받았다. 본 논문에서는 IMO 활성물질 승인을 받은 처리장치에 대한 작용 원리와 총잔류산화제(TRO) 농도를 고찰하였다. TRO 최대 허용 배출 농도는 중화장치를 통해 낮추어 대부분 0.2 ppm 이하의 농도를 보였으나, 최대 처리 허용 농도는 장치별로 1-15 ppm으로 큰 차이를 나타내었다. 처리장치 별로 TRO 처리 허용 농도의 차이는 처리장치의 특성 및 필터의 유무와 종류 등과의 연관성 보다는 생물 사멸시험 시 생물종 특성과 수온, 탁도 등 수질 특성에 기인하는 바가 크다고 판단된다.

• 한국태양에너지학회 논문집
• /
• 제33권5호
• /
• pp.69-75
• /
• 2013

To increase the efficiency of the photovoltaic, almost photovoltaic appliances are controlled by Maximum Power Point Tracking(MPPT). Existing most of the PV MPPT techniques have used power which multiplies sensed output current and voltage of the solar cell. However, these algorithms are unnecessarily complicated and too expensive for small and compact system. The other hand, the proposed MPPT technique is only one sensing of the MPPT converter's output current, so there is no need to insert another sensors of battery side. Therefore, this algorithm is simpler compared to the traditional approach and is suitable for low power solar system. Further, the novel proper charge/discharge algorithm for the battery with PV MPPT is developed. In this algorithm, there is CC battery charge mode and load discharge mode of the PV cell & battery dual. Also we design current control to regulate allowable current during the battery charging. The proposed algorithm will be applicable to battery included solar cell applications like solar lantern and solar remote control car. Finally, the proposed method has been verified with computer simulation.

• 한국방재학회 논문집
• /
• 제4권1호
• /
• pp.41-50
• /
• 2004

본 연구에서는 퍼지제어기법을 이용한 홍수조절 모형의 적용성을 파악하기 위해 한강수계 단일댐에 적용하였다. 개발된 모형들의 홍수조절능력을 비교하기 위해 1984, 1990, 1995년 대홍수 발생시 실제 운영실적과 본 연구에서 개발된 모형들의 가상운영결과를 비교하였다. 본 연구에서 개발한 3개 모형은 모두 실제 적용성을 고려하여 댐의 수위와 유입량이라는 2가지 정보량으로부터 방류량을 결정토록 하였으며, 최대방류량 역시 댐 설계시 기준인 허용최대방류량을 초과하지 않도록 하였다. 각 홍수사상에 대해 적용한 결과 기존의 댐 운영결과에 비해 홍수위를 낮출 수 있으면서도 하류부의 피해 최소화에도 적절한 것으로 나타나 퍼지제어모형의 적용성을 확인할 수 있었다.

• 기술사
• /
• 제18권3호
• /
• pp.28-35
• /
• 1985

As the paper industry consumes much water in process and discharge wastewater containing suspended solid and COD(chemical oxygen demand), relevant law against this discharge has been set up to limit the total containment of COD in discharge. This study has been carried out to improve the treatment method for the soluble COD in wastewater produced during the process of paste-board production, which is made of semichemical pulp and waste paper. Applicated methods are, O$_2$AS : O$_2$ activated sludge process DAS : Deep well activated sludge process SAS : standard activated sludge process and proper combination of DAS and SAS 1) As a result of this experiment, we get the following conclusion between in COD sludge loading "X" and COD removable rate in the process of treating waste-water. COD removable rate(％)=(0.778+0.0146/X)${\times}$100(％)……(7) 2) In case that the COD sludge loading is high, it has been cleared out that the COD removable rate shall become low due to unknown unsoluble substances contained in the process. Meanwhile, to increase the efficiency rate of treatment, it is thought to be necessary, to provide long-time contacts with activated sludge. 3) Once the COD of original waste-water and the target COD of treated water are decided, COD sludge loading is obtained from equation(7), and capacity of aeration tank in the effective systems such as O$_2$AS, DAS, to bet the required COD removable rate can be decided. Therefore the choice among SAS, O$_2$AS, DAS methods is made in consideration of required COD removable rate and allowable installation area. 4) In the sedimentation tank with sludge bulking, it is possible to increase the COD removable rate by 3～7％ but still there exist many obstacles to manage this operation.

• 대한토목학회논문집
• /
• 제41권6호
• /
• pp.663-673
• /
• 2021

해안구조물 설계시 허용평균월파량은 설계요소중의 하나이며, 구조물의 마루높이는 구조물의 안전, 보행자의 안전 및 운영 등에 요구되는 월파량 이하가 되도록 하여야 한다. 최근 들어 보다 안전한 설계를 위해 평균월파량보다 개별 최대월파량을 기준으로 적용하자는 제안이 이루어지고 있다. 본 연구는 비쇄파조건에서 개별 최대월파량에 대한 정보를 제공하고자 하는 것이며, 경사식구조물의 기하학적 형상을 고려안 2차원 수리모형실험을 수행하였다. 또한 실험을 위해 새로운 계측방법을 고안하였다. 실험결과를 이용하여 평균월파량에 기반하여 개별 최대월파량을 산정할 수 있는 경험식을 제안하였다. 그리고 피복재 어깨폭에 따른 평균월파량의 저감효과에 대해서도 검토하였다.

• 한국해안·해양공학회논문집
• /
• 제35권3호
• /
• pp.49-56
• /
• 2023

해안구조물 설계시 허용평균월파량은 설계요소 중의 하나이며, 구조물의 마루높이는 구조물의 안전, 보행자의 안전 및 운영 등에 요구되는 월파량 이하가 되도록 하여야 한다. 본 연구에서는 경사식구조물의 기하학적 형상을 고려하고, 다양한 수심조건에서 평균월파량 계측을 위한 2차원 수리실험을 수행하였다. 수리실험은 서로 다른 파형경사, 상대여유고, 상대파고 등을 적용하여 수행되었다. 실험결과를 이용하여 경사식구조물의 평균월파량을 산정할 수 있는 경험식을 제안하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.513-518
• /
• 2003

The piston slap phenomenon is one of the major noise source of reciprocating compressors used in household electric appliances. In response to public demand, strict regulations are increasingly being imposed on the allowable noise level which is caused mostly by household electric appliances. In this paper, the dynamic behavior of suction and discharge valves are analytically calculated and the lubricant behavior between piston and cylinder are investigated using two-dimensional Reynolds equation. And the piston slap caused by the piston secondary motion is investigated by the finite element method.

• Journal of Korean Vacuum Science & Technology
• /
• 제7권1호
• /
• pp.1-7
• /
• 2003

The pressure distributions in the test stand built for developing KSTAR NBI ion sources were obtained using a network system composed of conductance elements modeling the ion source, the neutralizer, and other beam line components. The allowable regime was defined on the coordinates of the gas supply rate to the ion source and the neutralizer, considering the proper conditions of the three critical parameters, the ion source pressure for good arc discharge, the pressure integral in the neutralizer for sufficient neutralization, and the chamber pressure for minimum neutral beam loss. The neutral beam evolution along the path from the ion source extraction grid to the calorimeter through the neutralizer, the bending magnet and the vacuum chamber was estimated for typical pressure distributions.

• 한국기계가공학회지
• /
• 제10권6호
• /
• pp.50-55
• /
• 2011

The fluid power products are widely used in current industrial area such as automation of products and equipment assembly, high-tech machine tool, aircraft, train, and etc. As the development of industry is in progress, the development of the fluid power products is demanding and it is required in every industrial area. This research proposed a pneumatic system to evaluate displacement accuracy of the pneumatic actuator without external load and to analyze capability of integration of the valve system. The pneumatic system consisted of a combination of pneumatic actuator, four two-port valves, two three-port valves, two pressure valve, a check valve, two proximity sensors, and a program logic controller (PLC). The position controller is based on the PLC connected with the proximity sensors. The maximum air pressure applied for tests was $49.05N/cm^2$ and the displacement accuracy of a stroke was measured using a dial gauge. The supply- and discharge-side of air pressure and the length of the stroke of the pneumatic cylinder were varied The test of the position control of the pneumatic cylinder was carried out 50 times at each supply- and discharge-side air pressure of 24.53/34.34, 29.43/39.24, 34.34/44.15, and $39.24/49.05N/cm^2$ and replicated three times. The accuracy of the displacement of the pneumatic cylinder stroke increased as the supply- and discharge-side of air pressure increased with the stroke length of 133mm. Also the displacement accuracy increased as the stroke length increased with the fixed supply- and discharge-side of air pressure of the pneumatic cylinder as 34.34 and $44.15N/cm^2$, respectively. The most accurate displacement of the pneumatic cylinder was obtained at the supplyand discharge-side of air pressure of 39.24 and $49.05N/cm^2$, respectively, and strokes of 170 and 190mm.