• Journal of Korea Port Economic Association
• /
• v.30 no.1
• /
• pp.1-21
• /
• 2014

Recently, GTO's rate of return to investment is decreasing. Therefore, the main purpose of this paper is to analyze empirically on enhancement of competitiveness of global port container terminal. This study deals with the terms of three competitiveness enhancement factors which are a GTO's subjective factors, a management environment factors, and a government policy factors. According to analysis results of the three competitiveness enhancement factors, a GTO's subjective factors(4.21 score) are scored at the most ones of competitiveness enhancement factors of GTO, to be compared with a management environment factors(3.94 score). with a government policy factors(3.90 score). Therefore, first of all, it is important to enhance competitiveness of GTO through as follows, a GTO's subjective factors : (1) to procure local and tranship cargo volume, (2) to promote port logistics service, (3) to retain resonable port rate by promoting terminal productivity, (4) to procure container ship firms and alliance. And, the next, we have to enhance GTO's competitiveness through considering a management environment factors, that is, fluctuation of container cargo volume, port awareness, whether function of hub port, etc., and a government policy factors, that is, smart policy of port development, smart policy of port rate, incentive policy for procuring tranship cargo, etc.

• Journal of Biomedical Engineering Research
• /
• v.28 no.6
• /
• pp.803-810
• /
• 2007

Although synthetic aperture focusing techniques can improve the spatial resolution of ultrasound imaging, they have not been employed in a commercial product because they require a real-time N-channel beamformer with a tremendously increased hardware complexity for simultaneous beamforming along M multiple lines. In this paper, a hardware-efficient beamformer architecture for synthetic aperture focusing is presented. In contrast to the straightforward design using NM delay calculators, the proposed method utilizes only M delay calculators by sharing the same values among the focusing delays which should be calculated at the same time between the N channels for all imaging points along the M scan lines. In general, synthetic aperture beamforming requires M 2-port memories. In the proposed beamformer, the input data for each channel is first upsampled with a 4-fold interpolator and each polyphase component of the interpolator output is stored into a 2-port memory separately, requiring 4M 2-port memories for each channel. By properly limiting the area formed with the synthetic aperture focusing, the input memory buffer can be implemented with only 4 2-port memories and one short multi-port memory.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.08a
• /
• pp.54-63
• /
• 2004

There are two principal routes for the Asia-North America containerized cargo, that of Asia-West Coast and Asia-East Coast. On the West Coast, the Asia-Los Angeles, dominate the commerce, whereas on the Asia-East Coast it's the Panama Canal. Each of these routes has different characteristics. All are similar in that each is the door to the commerce of containerized cargo originating in Asia; each combines maritime and overland transportation; each has important intermodal connections and is able to distribute cargo throughout the West and East Coasts of the United States. Each route also has its port of preference that has the necessary infrastructure, equipment and intermodal connections. For example, in the case of the Port of Los Angeles, in spite of some of its advantages, it has several serious problems due to the interminable containerized cargo traffic that must be solved rapidly and satisfactorily in order to progress. In this paper, we would like to show the problems of two main routes.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.921-927
• /
• 2001

Steady flow bench test is a practical, powerful and widely used test in most engine manufacturers to give a design concept of a new engine. In order to use steady data as a performance index, it is necessary to build some database, which can correlate the port characteristics with engine data. However, it is very hard to investigate all port and valve shapes with experimental tools. The steady flow scheme is relatively simple and its results are bulk ones such as flow rate and momentum of flow. Therefore a CFD code can be easily applied to the port evaluation. In this study, the steady flow test was simulated through two and three-dimensional analysis on intake port design for comparing with experimental data and confirming the feasibility of applying analytic method. For this purpose, the effect of valve curvature on flow rate was estimated by a CFD code. There results were compared with those of real steady flow tests. As a result, the 2-D analysis described the phenomena qualitatively well, and also the results of 3-D analysis were almost consistent with experimental data.

• Journal of the Korean Society of Safety
• /
• v.31 no.6
• /
• pp.32-38
• /
• 2016

In general, lots of containers including various dangerous materials are transported to the port located in big cities such as Busan where massive residents live. Thus, it's really important how to make the emergency response for the leak accidents of dangerous materials and evaluate the direct or indirect damages to adjacent areas. In this study, in order to make reasonable emergency plans, CA (Consequence Analysis) is employed after selecting a key hazardous and noxious material, hydrogen fluroide. This material accounts for the third largest portion of cargo volume among all dangerous materials and can cause a huge damage in case of leakages. As a case study, Busan North port is selected as a test port since the portion of dangerous materials is higher than that of other ports in Busan. It is assumed that 1 ton of hydrogen fluoride is spilled at Busan North port. CA is performed to assess the impact of this accident. Throughout CA, the ERPG-2 range of a leak accident can be evaluated and this result can be used for decision making tools for mitigating the impact of a leak accident. To mitigate the damage of this accident, suitable a protective equipment and resident evacuation procedures should be prepared. Finally, this study can provide a systematic approach to make the emergency plan for reducing economical and personal losses.

• Journal of the Korean Institute of Navigation
• /
• v.13 no.1
• /
• pp.55-61
• /
• 1989

Nowadays much efforts for evaluating the productivity of port physical distribution system to meet the rapid change of the port and shipping circumstances has been made continuously all over the world. The major part of these efforts is the improvement of the productivity of cargo handling system. The cargo equipment system as infrastructure in the cargo handling system is organized well in some degrees, but the management system of manpower as upper structure is still remained in an insufficient degree. There is little study, so far, on a systematic research for the management of port labor gang, and even those were mainly depended on rule of thumb. The object of this study is to introduce the method of optimal allocation and assignment for the labor gang in single ship, which was suggested as a first stage in dealing with them generally. The problem of optimal allocation and assignment of the labor gang can be (I) formalized with multi-stage allocation and assignment of the labor gang can be. (II) dealt with two stages in form of hierarchic structure and moreover, (III) The optimal size of labor gang was obtained through dynamic programming from the point of minimizing the summation of labor gang in every stage, (IV) For the problem of optimal assignment, the optimal policy was determined at the point of minimizing the summation of movement between hatches.

• Journal of Korean Institute of Industrial Engineers
• /
• v.25 no.2
• /
• pp.233-239
• /
• 1999

With the increase of Internet protocol (IP) packets the performance of routers became an important issue in internetworking. In this paper we examined the matching algorithm in gigabit router which has input queue with virtual output queueing. Port partitioning concept is employed to reduce the computational burden of the scheduler within a switch. The input and output ports are divided into two groups such that the matching algorithm is implemented within each input-output pair group in parallel. The matching is performed by exchanging input and output port groups at every time slot to handle all incoming traffics. Two algorithms, maximal weight matching by port partitioning (MPP) and modified maximal weight matching by port partitioning (MMPP) are presented. MMPP has the lowest delay for every packet arrival rate. The buffer size on a port is approximately 20-60 packets depending on the packet arrival rates. The throughput is illustrated to be linear to the packet arrival rate, which can be achieved under highly efficient matching algorithm.

• Journal of Korean Port Research
• /
• v.11 no.2
• /
• pp.273-280
• /
• 1997

Recently the importance of the cargo handling equipments in a port has been increasing to get strong competition from other ports. Many ports are making efforts to modernize their cargo handling equipments. The kernel technology of such equipments is the speed control of DC motor which is used as an essential part of them. In this paper, we discuss the speed control of a DC motor as a basic work for building cargo handling equipments in a port. DC Motors are still widely used in industrial fields, as driving power motor for electrical fields. DC drives, being easy to control, are widely used in many variable-speed and position control drive system. Traditional analog control circuits used in such applications have many disadvantages. Complex control schemes are difficult to implement with analog components. All these factor and invention of the microprocessor has made it possible to use digital control circuits, using microprocessing system. These digital circuits have been found to be reliable, flexible, and also immune to noise. In this paper it presents the speed control of a SCR DC motor driver which using dual converter by 80c196kc microprocessor. We developed a thyristor power amplifier which does not cause damage thyristor because it is designed to prevent triggering the two SCRs in the same arm simultaneously. And it was analyzed voltage and currents wave at reactive load.

• Journal of the Korean Institute of Navigation
• /
• v.24 no.3
• /
• pp.167-176
• /
• 2000

The -advent of electronic navigation equipment and trustworthy computer which provides people with convenience made the management system by one-man bridge operation or the least people who are needed possible through the integration of communication network with various navigation equipment and related institution. One of the most needed ultra-modem navigation device for a mate, ECDIS is a core equipment for navigation in ENS that notifies peril to mate as well as supervises all tasks in hydrographical chart, voyage planning, course monitoring and voyage recording. We should make coast and ocean voyage planning first, for the secure navigation which is considering the course circumstances and next, for the reduction of voyage dates in economical aspect. There needs a thoughtful consideration about the feature of the ship itself and the course with weather condition in taking up the course and also we have to take into accounts about appropriate distance between ships. Considering the essential conditions of ECDIS the indispensable device in the future, it was developed the basic principle for voyage planning algorithm for officer and programmed to real implementation available. In this paper including most of the requirements in ECDIS performance standard I mentioned about such a basic and a core Principle with real application by using the Visual C++ programming language. The voyage plan includes the function that indicate and modifies all the way points in the course from department port to arrival port with erasing the wrong way points. Also, it provides in a document form that shows ETA at glance in average speed sailing.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.12 no.6
• /
• pp.14-20
• /
• 1975

Characteristics of coupled trigonometric transmission lines (CTTL) are studies based on the theory of general coupled nonuniform transmission lines. First, the 4-port transmission matrix parameters of networks and directional couplers using CTTL. The phase slrift characteristic of the all-pass networks and the magnitude characteristic of the directional couplers are studied in detail for various coupling and a high-pass small ripple directional coupler using CTTL are given and their physical realization is considered.