• Journal of KIISE:Information Networking
• /
• v.30 no.3
• /
• pp.377-386
• /
• 2003

In this paper, we present an application layer protocol to support secure wireless Internet services, called Application Layer Security(ALS). The drawbacks of the two traditional approaches to secure wireless applications motivated the development of ALS. One is that in the conventional application-specific security protocol such as Secure HyperText Transfer Protocol(S-HTTP), security mechanism is included in the application itself. This gives a disadvantage that the security services are available only to that particular application. The other is that a separate protocol layer is inserted between the application and transport layers, as in the Secure Sockets Layer(SSL)/Transport Layer Security(TLS). In this case, all channel data are encrypted regardless of the specific application's requirements, resulting in much waste of network resources. To overcome these problems, ALS is proposed to be implemented on top of HTTP so that it is independent of the various transport layer protocols, and provides a common security interface with security applications so that it greatly improves the portability of security applications. In addition, since ALS takes advantages of well-known TLS mechanism, it eliminates the danger of malicious attack and provides applications with various security services such as authentication, confidentiality integrity and digital signature, and partial encryption. We conclude this paper with an example of applying ALS to the solution of end-to-end security in a present commercial wireless protocol stack, Wireless Application Protocol.

• Journal of radiological science and technology
• /
• v.40 no.4
• /
• pp.639-646
• /
• 2017

The purpose of this study is to present the algorithm to minimize the image noise caused by deterioration of high X-ray container inspection equipment and the faulty detection sensors, and to improvement quality of the container inspection images using MATLAB Toolbox. The daily checking images for the container inspection were used with the subject images and the noise caused by the horizontal and vertical images was evaluated with Root Mean Square (RMS) method, which is the most basic evaluation method of digital radiation image. Also, quality of the improved images was evaluated compared to quality of the orignal images. As a result, all RMS value of the improved images was lower then the original images by a mean of 13.5% in the horizontal images and 18.2% in the vertical images respectively. Also so did RMS value of the improved container images, by a mean of 13.4% in the horizontal images and 19.1% in the vertical images respectively. These findings can be verified objectively and visually and they would help the reading process of the container images be effective in Korea Customs Service.

• Proceedings of the KSRS Conference
• /
• 2000.04a
• /
• pp.166-171
• /
• 2000

밀티빔 음향 측심기 (Multibeam Echo Sounder)는 탐사선에 수직방향으로 해저면을 주사(Swath)하여, 한번의 송수신(Ping)으로 다중의 빔자료를 얻을 수 있는 측심기로, 해저면에 반사되어 되돌아오는 음파의 음압을 기록하고, 사이드 스캔 소나 자료도 동시에 취득하는 기능을 가지고 있으므로, 측심된 해저 지형(Bathymetry)과 해저 지형을 덮고 있는 해저면의 퇴적 상황(Sediment Environment)도 동시에 얻을 수 있는 다목적 측심기이다. 본 논문에서는 L3사의 Sea Beam 2100 멀티빔 음향 측심기를 통해 얻은 자료를 처리하여, 3차원 공간 데이터인 DEM(Digital Elevation Model)을 생성하고, VRML을 이용한 웹상에서의 해저 지형 가시화를 통해, 세계 어느 곳에서나 웹을 통하여 쉽게 정보를 공유할 수 있는 3차원 해저 지리 정보 시스템의 구현을 목적으로 한다. 멀티빔 음향 측심기를 통해 얻어진 자료는 항해 자료 보정, 음속 보정, 빔 좌표 계산과 분리, 오측심 자료 제거, 조석 보정 등의 단계를 거쳐 측심자료의 정확도 및 신뢰도를 높이는 과정을 거치게 된다. 보정된 멀티빔 음향 측심자료는 무작위 점 사상(Point Topology)으로 산재 되어 있는 빔 자료를 임의의 단위영역으로 변환하는 과정을 거쳐야 하는데, 이 과정을 격자화라고 한다. 자료의 격자화를 통해 3차원 공강 데이터인 DEM 파일을 제작하고, 이 DEM 파일과 음압 영상을 이용해 웹상에서의 3차원 해저 지형의 가시화를 실현한다. 웹상에서의 3차원 지형 가시화에서 방대한 양의 지형 데이터는 데이터 전송 시간과 렌더링 시간에 치명적인 문제이다. 따라서, 렌더링 시간과 데이터 전송 시간을 단축시키기 위한, 지형 자료의 LOD(Level of Detail)를 통해, VRML을 이용한 보다 효과적인 웹상에서의 3차원 해저 지형의 가시화를 실현한다.면 기업은 고객으로 공간적인 제약으로 인한 불신을 불식시키는 신뢰감을 주게 된다. 이러한 고객서비스 향상과 물류비용 절감은 사이버 쇼핑몰이 전국 어디서나 우리의 안방에서 자연스럽게 점할 수 있는 상황을 만들 것이다.SP가 도입되어, 설계업무를 지원하기위한 기본적인 시스템 구조를 구상하게 된다. 이와 함께 IT Model을 구성하게 되는데, 객체지향적 접근 방법으로 Model을 생성하고 UML(Unified Modeling Language)을 Tool로 사용한다. 단계 4)는 Software Engineering 관점으로 접근한다. 이는 최종산물이라고 볼 수 있는 설계업무 지원 시스템을 Design하는 과정으로, 시스템에 사용될 데이터를 Design하는 과정과, 데이터를 기반으로 한 기능을 Design하는 과정으로 나눈다. 이를 통해 생성된 Model에 따라 최종적으로 Coding을 통하여 실제 시스템을 구축하게 된다.the making. program and policy decision making, The objectives of the study are to develop the methodology of modeling the socioeconomic evaluation, and build up the practical socioeconomic evaluation model of the HAN projects including scientific and technological effects. Since the HAN projects consists of 18 subprograms, it is difficult In evaluate all the subprograms simultaneously. Despite, each program is being performed under the category of HAN projects, so the common soci

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.745-752
• /
• 2016

In the era of the Internet of Things, where all physical objects are connected to the Internet, we suggest a remote control system using a Raspberry Pi single-board computer with ZigBee, which can turn an indoor light-emitting diode (LED) and a multiple-tap on and off, and with a smart phone can control the brightness of the LED as well as an electronic door lock. By connecting an infrared (IR) transmitter module to the Raspberry Pi, we can control home appliances, such as an air conditioner, and we can also monitor indoor images, indoor temperatures, and illumination by using a smart phone app. We developed a method of finding out IR transmission codes required for remote-controllable appliances with an AVR micro-controller. We suggest a method to remotely open and shut an office door by novating the door lock. The brightness level of an LED (between 0 and 10) can be controlled through a PWM signal generated by an ATmega88 microcontroller. A mutiple-tap is controlled using an ATmega32, a photo-coupler, and a TRIAC. The signals for measured temperature and illumination are converted from analog to digital by using the ATtiny44A microcontroller transmitting to a Raspberry Pi through SPI communication. Then, we connect a camera to the CSI head of the Raspberry Pi. We can turn on the smart multiple-tap for a certain period of time, or we can schedule the multi-tap to turn on at a specific time. To reduce standby power, people usually pull out a power code from multiple-taps or turn off a switch. Our method helps people do the same thing with a smart phone, if they are away from home.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.1
• /
• pp.84-93
• /
• 2004

Recently, domain-specific demands with respect to practical applications and analysis scheme using spatial thematic information are increasing. Accordingly, in this study, GIS-based application program is implemented to perform spatial analysis in transportation geography with base road layer data. Using this program, quantitative estimation of circuity and accessibility, which can be extracted from nodes composed of the graph-typed network structure, in a arbitrary analysis zone or administrative boundary zone is possible. Circuity is a concept to represent the difference extent between actual nodes and fully connected nodes in the analysis zone. While, accessibility can be used to find out extent of accessibility or connectivity between all nodes contained in the analysis zone, judging from inter-connecting status of the whole nodes. In put data of this program, which was implemented in AVX executable extension using AvenueTM of ArcView, is not transportation database information based on transportation data model, but layer data, directly obtaining from digital map sets. It is thought that computation of circuity and accessibility can be used as kinds of spatial analysis functions for GIS applications in the transportation field.

• Journal of dental hygiene science
• /
• v.15 no.2
• /
• pp.202-208
• /
• 2015

The aim of this retrospective study was to evaluate the relationship between periodontal health condition and the results of a new method such as Cariview which could evaluate the acidity of dental biofilms. Fifty four subjects more than 20 years old were selected for the candidates of this study. The periodontal health conditions of the candidates were divided into 4 groups according to the assessment of X-ray and Quantitative Light-induced Fluorescence-Digital (QLF-D; Inspektor Research Systems BV) images; gingivitis, slight periodontitis, moderate periodontitis, severe periodontitis. The biofilm acidogenicity of each subject was examined using Cariview (All in ONE BIO) according to manufacturer's instruction, and the Cariview score was calculated. The mean differences of Cariview score between 4 groups of periodontal health condition were examined by ANCOVA test with the covariance of decayed, missing, and filled teeth (DMFT) index. As a result, the mean Cariview score was different, however it was not significantly different from the 4 groups (p=0.12). The mean score was the lowest in the gingivitis group ($40.54{\pm}11.01$), and the highest in slight periodontitis group ($57.26{\pm}20.51$). In conclusion, the significant mean differences were not confirmed in Cariview score according to the periodontal health condition.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.27 no.3
• /
• pp.66-78
• /
• 2014

Objectives: The purpose of this study is to investigate the relationship between vasomotor symptoms with upper-lower body temperature differences, and to identify Kidney Deficiency pattern (腎虛證) in menopausal women. Methods: 51 women who visited Kangnam Kyung-Hee Oriental Hospital from July to December, 2013 were analyzed. The experimental group consisted of 30 patients reported with vasomotor symptoms (Vasomotor symptom group, VG), while the control group consisted of 21 patients without vasomotor symptoms (Control group, CG). According to their chief complaints, VG was further divided into VHG (vasomotor-hot flash group) and VCG (vasomotor-cold hypersensitivity group). The temperature differences between upper and lower body part (CV17-CV4), proximal and distal extremity part (LU4-HT8, ST32-LR3) were checked. All patients reported other complaints such as headache, sweating, anxiety, dyspepsia, leukorrhea, which belong to Kidney Yang Deficiency pattern (腎陽虛證) or Kidney Yin Deficiency pattern (腎陰虛證). The relationship between vasomotor symptom and repetition rate of additional complaints were analyzed. Results: Statistical analysis showed that lower abdomen temperature of experimental group was lower than the control group. Temperature differences of upper and lower body (CV17-CV4) was significantly larger in vasomotor symptom group. VHG had more symptoms of sweating, chest discomfort, constipation, which belong to Kidney Yang Deficiency pattern group. VCG had more symptoms of leukorrhea, diarrhea, and dyspepsia, which belong to Kidney Yin Deficiency pattern group. Conclusions: Climacteric women who suffered from vasomotor symptoms showed lower temperature tendency in [CV4], larger temperature differences in [CV17-CV4] compared to the control group. Among them, VHG showed more symptoms of Kidney Yin Deficiency pattern, whereas VCG showed more symptoms of Kidney Yang Deficiency pattern.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.48 no.3
• /
• pp.245-254
• /
• 2021

The aim of this study was to evaluate the accuracy of 3 different automatic landmark identification programs on lateral cephalgrams and the clinical acceptability in pediatric dentistry. Sixty digital cephalometric radiographs of 7 to 12 years old healthy children were randomly selected. Fourteen landmarks were chosen for assessment and the mean of 3 measurements of each landmark by a single examiner was defined as the baseline landmarks. The mean difference between an automatically identified landmark and the baseline landmark was measured for each landmark on each image. The total mean difference of 3 automatic programs compared to the baseline landmarks were 2.53 ± 1.63 mm. Errors among 3 programs were not significantly different for 12 of 14 landmarks except Orbitale and Gonion. The automatic landmark identification programs showed significant higher mean detection errors than the manual method. The programs couldn't be used as the 1st tool to replace human examiners. But considering short consuming time, these results indicate that all 3 programs have sufficient validity to be used in pediatric dental clinic.

• The Journal of Bigdata
• /
• v.6 no.1
• /
• pp.145-151
• /
• 2021

In recent years, digital data has been generated in all areas of human activity, and there are many attempts to safely store and process the data to develop useful services. A data lake refers to a data repository that is independent of the source of the data and the analytical framework that leverages the data. In this paper, we designed a tool to safely store various big data generated by smart cities in a data lake and ETL it so that it can be used in services, and a web-based tool necessary to use it effectively. Implement. A series of processes (ETLs) that quality-check and refine source data, store it safely in a data lake, and manage it according to data life cycle policies are often significant for costly infrastructure and development and maintenance. It is a labor-intensive technology. The mounting technology makes it possible to set and execute ETL work monitoring and data life cycle management visually and efficiently without specialized knowledge in the IT field. Separately, a data quality checklist guide is needed to store and use reliable data in the data lake. In addition, it is necessary to set and reserve data migration and deletion cycles using the data life cycle management tool to reduce data management costs.

• The Korean Journal of Urological Oncology
• /
• v.16 no.3
• /
• pp.110-118
• /
• 2018

Purpose: The aim of this study is to confirm the detection rate of transperineal biopsy after multiparametric magnetic resonance imaging (mpMRI) and compared it to that of transrectal biopsy. We also examined the role of mpMRI and the rate of complications for each method. Materials and Methods: In a retrospective study, we analyzed 147 patients who underwent mpMRI before prostate biopsy because of elevated serum prostate-specific antigen and/or abnormal digital rectal examination findings at Korea University Hospital, Seoul, Korea from March 2017 to April 2018. Regions on the mpMRI that were suggestive of prostate cancer were categorized according to the Prostate Imaging-Reporting and Data System (PI-RADS v2). For transperineal biopsy, a 20-core saturation biopsy was performed by MRI-TRUS cognitive or fusion techniques and a 12-core biopsy was performed in transrectal biopsy. Results: Sixty-three and 84 patients were enrolled in transperineal group and transrectal group, respectively. The overall detection rate of prostate cancer in transperineal group was 27% higher than that in transrectal group. Classification according to PI-RADS score revealed a significant increase in detection rate in all patients, as the PI-RADS score increased. Frequency of complications using the Clavien-Dindo classifications revealed no significant differences in the total complications rate, but two patients in transrectal group received intensive care unit care due to urosepsis. Conclusions: Our results confirmed that transperineal biopsy is superior to transrectal biopsy for the detection of prostate cancer. From the complication point of view, this study confirmed that there were fewer severe complications in transperineal biopsy.