• Journal of the Korean Applied Science and Technology
• /
• v.17 no.4
• /
• pp.213-225
• /
• 2000

Sophorolipids were biosynthesized using a strain of yeast, Torulopsis bombicola ATCC22214. It has been reported that this yeast gives the highest yields for the production of biosurfactant sophorolipids. Hence, this yeast was used in this study. One of the objectives of this study is to increase the yield of the sophorolipid synthesis. To meet this end, basic culture medium was formulated on the basis of literature research to-date. When this medium was used, the increase in yield from 15% to 150% was observed compared to using the media in the literature. To examine how the interfacial characteristics of sophorolipids change with substrate, glucose (the first carbon source) was maintained in the media and after being cultured for three days, the second carbon sources such as alkanes, vegetable oils, alcohols or organic acids were added. The whole broth was extracted twice with ethyl acetate and the extract was analyzed by thin layer chromatograhy(TLC). After qualitative analyses by TLC, surface tensions of sophorolipids were measured by the Wilhelmy plate method and critical micelle concentration(CMC) was determined using these surface tension data. Also, interfacial tensions were measured by the spinning drop method and emulsions of the three-component water/decane/sophorolipid system were tested. Sophorolipids were effective and efficient in terms of surface tension reduction and CMC, but they were ineffective as emulsifiers because emulsions were separated within 30 minutes.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.114.2-114.2
• /
• 2011

Furfural is a versatile derivative. It can be utilized for a building-block of furfuryl alcohol production and a component of fuels or liquid alkanes. But in bio-process, furfural is a critical compound because it inhibits cell growth and metabolism. Furfural could be converted from xylose and usually produced from biomass in which hemicellulose is abundant. In this study, furfural production from miscanthus was performed and utilization of miscanthus residue was consequently conducted. At first, hydrolysis for investigation of miscanthus composition and furfural production was performed using sulfuric acid. Previously, we optimized dilute acid pretreatment condition for miscanthus pretreatment and the condition was found to be about 15 min of reaction time, 1.5% of acid concentration and about $140^{\circ}C$ of temperature and 60% (about 7 g/L) of xylose was solubilized from miscanthus. Using the xylose, furfural production was conducted as second step. Approximately $160{\sim}200^{\circ}C$ of temperature was accompanied with the hydrolysis for pyrolysis of biomass. When the investigated condition; $180^{\circ}C$ of temperature, 20 min of reaction time and 2% of acid concentration was operated for furfural production, furfural productivity was reached to be 77% of theoretical maximum. After reaction, residue of miscanthus was utilized as feedstock of ethanol fermentation. Residue was well washed using water and saccharified using hydrolysis enzymes. Hydrolysate (glucose) from saccharification was utilized for the carbon source of Saccharomyces cervisiae K35.

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.6
• /
• pp.779-790
• /
• 2006

This study examines relative contributions of volatile organic compounds (VOCs) to the formation of hydroxyl (OH) and peroxy radicals such as $HO_2$ and $RO_2$ during the intensive sampling period (Jun. $1{\sim}30$, 2004) in the air of Seoul metropolitan area. As to the contribution of VOCs to $HO_x$ levels, the impact of individual VOC concentration change on $HO_2$ concentration change was more than an order of magnitude higher than that on OH concentration change during the study period. The contribution of change in isoprene concentration to $HO_2$ concentration change was 38 times higher than OH and that in the concentration of alkene compounds to $HO_2$ concentration change was 31 times higher than OH. Moreover, the concentration changes of isoprene and aromatic compounds (AROM) played significant roles in $HO_x$ concentration changes. On the other hands, aldehydes (ALD2) and alkanes (ALKA) showed anti-correlation (negative) in $HO_x$ concentration changes with low contribution ($-4{\times}10^{-3}$ pptv/ppbv (OH) and $-58{\times}10^{-3}$ ($HO_2$) for ALD2; $-1{\times}10^{-3}$ (OH) and $-15{\times}10^{-3}$ ($HO_2$) for ALKA). Unlike other VOCs, $C_2H_6$ and $C_3H_8$ showed positive or negative contribution to peroxy radicals, depending on ambient air conditions. The contribution of VOC concentration changes to changes in $CH_3O_2$ and $RO_2$ concentration showed similar pattern to $HO_x$ contribution.

• Journal of the Korean Chemical Society
• /
• v.36 no.4
• /
• pp.485-495
• /
• 1992

The viscosities of organic compounds (alcohols, acetates, alkanes, acids, substituted $NH_2$) in liquid states, gas states and the binary mixtures of n-alkane / 1-chloroalkane were calculated by molecular modeling techniques. The molecular descriptors of molecular modeling technique are Molecular connectivity indices, Wiener indices and ad hoc descriptors, which can encode the information of compound properties about the effect of size, branching, cyclization, unsaturation, heteroatom content, polarizability, and so on. The successful results among method have been Molecular connectivity indices, binary mixtures of n-alkane / 1-chloroalkane, Wiener indices for gas state and ad hoc descriptor for liquid states. Also we obtained the regression equations for viscosities using molecular modeling indices for gas, liquid states and binary mixtures of n-alkane / 1-chloroalkane. The calculated viscosity values for organic compounds are in good agreement with experimental results.

• Korean Journal of Microbiology
• /
• v.21 no.4
• /
• pp.191-196
• /
• 1983

A Corynebacterium sp. capable of utilizing diaminododecane (DAD) were isolated from the soil by enrichment culture. Among 9 different kinds of substituted alkanes containing CN, $NH_2$, Cl, and SH groups (monoterminally or diterminally substituted) tested as carbon source, the isolate, designated as DAD 2-3, utilized DAD, putrescine dihydrochloride, dodecane and laurylamine. Dodecanethiol, thioanisole, decanedithiol, dicyanooctane, laurylcyanide,and dichlorodecane were not utilized. When emulgen 950 was added to the medium, the growth of DAD 2-3 was slightly accelerated. Isolate DAD 2-3 grown in the medium with DAD as carbon source formed .alpha.-ketoglutaric acid. Metabolic product of DAD 2-3 grown in a medium without nitrogen source was different from that of grown in a medium with $NH_4NO_3$. When glucose, putrescine, n-dodecane and other alkane derivatives were tested in place of DAD, isolate DAD 2-3 yielded products different from those they formed with DAD suggesting specificity of DAD as a carbon source.

• Korean Chemical Engineering Research
• /
• v.45 no.3
• /
• pp.219-225
• /
• 2007

The equilibrium solubilization capacity of pure hydrocarbon oils by 2.5 wt% $C_{12}E_8$ nonionic surfactant solution was measured at $30^{\circ}C$ by gas chromatography (GC) analysis. Experimental results indicated that the molar solubilization ratio (MSR) for pure alkanes was found to decrease almost linearly with the alkane carbon number (ACN) of the hydrocarbon oil. For the binary mixture systems of the hydrocarbon oils both selective and nonselective solubilization behaviors were observed depending on the difference in carbon number of the two hydrocarbon oils. Equilibrium solubilization tests for the two n-octane/n-nonane and n-nonane/n-decane mixture systems in $C_{12}E_8$ surfactant solutions suggest slightly selective solubilization in favor of n-octane, but the small difference in solubilization rates between two hydrocarbon oils does not allow ruling out non-selective solubilization for these particular systems. This is certainly not the case for the n-octane/n-decane mixture, for which selective solubilization was conclusively demonstrated by GC analysis data.

• Advances in Energy Research
• /
• v.1 no.2
• /
• pp.107-116
• /
• 2013

This study was to investigate the composition and characteristics of long-chained alcohols extracted from the algal strain Monoraphidium 3s35. The production of biomass was optimized using different cultivation methods. Under the aerated growth condition, this strain yielded up to 37.26% extracts of dry weight and $576mgL^{-1}$ biomass. The major compounds of the extracts are mainly long-chained alcohols (89.24%), with carbon chain length ranging from 12 to 20. Interestingly, or the long-chained alcohols, 3-(2-Methoxyethyl)-1-nonanol, 3,7,11,15-Tetramethyl-2-hexadecen-1-ol and oleyl alcohol accounted for 53.68%, 23.45%, and 12.11%, respectively. Because of their amphipathic nature, these long-chained alcohols have been widely used in bioenergy production and cosmetics industry. Furthermore, Monoraphidium 3s35 produced 9.73% of $C_{17}$ and $C_{20}$ alkanes, which can be used as an important supplement for the petrodiesel-like fuel.

• Journal of Soil and Groundwater Environment
• /
• v.8 no.1
• /
• pp.27-34
• /
• 2003

In this study, potential degradation of MTBE and other gasoline oxygenates by pure culture ENV425 and mixed culture isolated from gasoline contaminated soil using butane as the sources of carbon and energy was examined and compared. Butane monooxygenases(BMO) of butane-grown ENV425 and mixed culture generated 1-butanol as a major metabolite of butane oxidation and addition of acetylene, specific inhibitor of monooxygenase, inhibited both butane oxidation and 1-butanol production. The results described in this study suggest that alkanes including propane, pentane, and butane are effectively utilized as a growth substrate to oxidize MTBE cometabolically. And also BTEX compounds could be the potential substrate of the MTBE cometabolism. Cell density also affected on the MTBE degradation and transformation capacity(Tc). Increasing cell density caused increasing MTBE degradation but decreased transformation capacity. Other result demonstrated that MTBE and other gasoline oxygenates, ETBE and TAME, were degraded by butane-grown microorganism.

• The Korean Journal of Food And Nutrition
• /
• v.32 no.5
• /
• pp.485-493
• /
• 2019

The purpose of this study was to investigate the quality characteristics and volatile flavor components of Doonuri wine, using freeze concentration. The freeze concentration can increase the sugar concentration in grape juice by reducing its water content. In this study, after eight days od fermentation, the alcohol content of freeze-concentrated Doonuri wines was 12.5~14.1%. The pH of the wine was 3.42~3.50 and the total acid content was 0.68~0.94 g/100 mL, respectively. The brghtness of freeze-concentrated Doonuri wines was 19.28~54.42, the redness was 41.98~49.58, and the yellowness was 36.16~42.36. The organic acid analysis of Doonuri wines was that most of the organic acids contain tartaric and malic acid. By using freeze concentration with grape juice, significant increase in the total polyphenol content of Doonuri wines was 122.40~137.26 mg/mL, the total anthocyanin content was 117.06~118.40 mg/L and the tannic acid content was 66.23~83.70 mg%. In GC/MS analysis, the volatile flavor component analysis of Doonuri wines identified six alcohols, five esters, two ketones, on acid, two alkanes, and four other compounds.

• Natural Product Sciences
• /
• v.27 no.1
• /
• pp.36-44
• /
• 2021

The essential oils from the aerial parts (leaves and flowers) of Spiraea hypericifolia L. (Rosaceae), collected in Northern Kazakhstan, were obtained by distillation in two dispersion media (distilled water and 15% NaCl solution). The chemical composition of the essential oils was evaluated by GC-MS for the first time. The yield of the essential oil was 0.04% (in fresh growth conditions) and 0.02% (in dry growth conditions) respectively regardless of which dispersion media (H2O or 15% NaCl solution) was used at the isolation of essential oil. The main compounds were aliphatic hydrocarbons (alkanes) (40.6-53.2%), aldehydes (8.4-17.4%), diterpenoids (9.1-16.7%) and ketones (6.2-8.7%). Content of monoterpenoids was depended on dispersion media (2.2-3.6% where H2O was dispersion media and 8.4-8.5% where 15% NaCl solution was dispersion media). n-Heneicosane (17.4-34.1%) and n-tricosane (14.3-19.5%) were the main constituents of the essential oil of S. hypericifolia. There were many insects from different classes in S. hypericifolia at flowering. Important components such as α-methylene-γ-butyrolactone (0.8-2.8%), benzyl cyanide (0.7-1.1%), β-damascenone (1.2-2.9%), (E,E)-4,8,12-trimethyl-1,3,7,11-tridecatetraene (1.8-2.7%), β-ionone (0.5-1.8%) and others were detected in small amounts.