• 제목/요약/키워드: alkaline weight reduction

검색결과 41건 처리시간 0.02초

Alkaline Weight Reduction Monitoring of Sea-island Type Polyarnide Microfiber Fabrics

  • Kwon Yoon-Jung;Koh Joon-Seok;Oh Myung-Joon;Kim Sung-Dong
    • Fibers and Polymers
    • /
    • 제7권1호
    • /
    • pp.20-25
    • /
    • 2006
  • The alkaline dissolution behavior of sea-island type polyarnide microfibers were successfully monitored using a cationic dye staining method. Weight reduction behavior of the alkali-treated microfiber fabrics and the treated fabrics stained with cationic dye were investigated in a comparative manner. The termination of dissolution monitored by both methods was also confirmed by scanning electron microscopy.

0.01d 폴리에스테르 초극세 섬유의 알칼리 감량과 물성 (Alkaline Weight Reduction and Physical Properties of 0.01d Polyester Ultramicro Fiber)

  • 박재민;정동석;노환권;이문철
    • 한국염색가공학회지
    • /
    • 제18권4호
    • /
    • pp.37-42
    • /
    • 2006
  • Two kinds of sea-island type polyester ultramicro fibers (fiber fineness : 0.01 and 0.05 denier) were treated with NaOH varying time and concentration. Surface morphology of the treated fibers with alkaline weight loss was observed by SEM. The treated effects were investigated by measuring density, melting temperature, and X-ray diffraction patterns. The surface morphology of the polyester ultramicro fiber was changed by NaOH concentration. Weight loss of 0.01d fiber was much larger than that of 0.05d fiber. Density and crystallinity were increased with weight loss of fiber. After the weight loss had finished, the density and crystallinity were decreased because of attack of island partition of the fiber. A melting temperature$(T_m)$ is $250^{circ}$ at untreated fiber on the whole and in 0.05d fiber the $(T_m)$ is $252^{circ}$ at untreated. In 0.01d fiber the $(T_m)$ was increased with weight loss of fiber.

아세테이트 직물의 NaOH 처리시 무기염 첨가에 따른 영향 (The Effect of Sodium Acetate in Alkaline Treatment of Acetate Fabrics)

  • 성종미;김혜림;송화순
    • 한국의류산업학회지
    • /
    • 제7권1호
    • /
    • pp.85-90
    • /
    • 2005
  • The effect of sodium acetate to reduce the fiber damage and hardening of acetate fabrics during alkaline treatment is studied. The optimal condition is controlled concentration 2%, at $50^{\circ}C$ for 6 minutes and at $70^{\circ}C$ for 2 minutes through the result of weight loss, shrinkage and tensile strength. Alkaline treated acetate fabrics under optimal condition show softer than untreated acetate fabrics. Alkaline treatment with sodium acetate brings the reduction in hardening and shrinkage in internal fiber of acetate fabric. Also, alkaline treatment with sodium acetate improves the tensile strength of acetate fabrics compared with only alkaline treatment. The moisture regain of acetate fabrics is also improved by alkaline treatment under optimal condition.

폴리에스테르 감량가공(減量加工) 폐수(廢水)의 최적(最適) 처리방안(處理方案)에 관한 연구(硏究) (A Study on the Treatment of Wastewater from the Weight-Reduction Process of Polyester)

  • 정윤진;양태두;김웅하
    • 상하수도학회지
    • /
    • 제7권1호
    • /
    • pp.20-28
    • /
    • 1993
  • The Wastewater from the weight reduction process of polyester is more difficult to be treated biologically than the general wastewater from dyeing and finishing processes in textile industries. Above wastewater shows high pH, high organic strength and wide variation of organic loading. These characteristics are due to TPA and EG resulting from alkaline weight-reduction process and make trouble in the operation of activated sludge process. Therefore, the objective of this study is to develop the pretreatment method for the successful operation of treatment process. For the successful pretreatment process, the wastewater from weight-reduction process should be segregated from other wastewater stream and then acidified with concentrated sulfuric acid to precipitate out TPA from DST solution. At the optimum pH of 2. 2, the initial $COD_{cr}$ 60,000mg/l is reduced to 11,500mg/l and the removal efficiency of $COD_{cr}$ is 81.1%. The required amount of sulfuric acid for pretreatment is not greater than the amount for the the existing neutralization process. Moreover, the supernatant of pretreatment process can be reused in acidification of wastewater.

  • PDF

Effect of Atrial Natriuretic Peptide on the Proliferation and Activity of Osteoblastic Cells

  • Lee, Jong-Ryeul;Ko, Seon-Yle;Kim, Jung-Keun;Kim, Se-Won
    • The Korean Journal of Physiology and Pharmacology
    • /
    • 제4권4호
    • /
    • pp.283-289
    • /
    • 2000
  • Natriuretic peptides comprise a family of three structurally related peptides; atrial natriuretic peptide (ANP), brain natriuretic peptide (BNP), and C-type natriuretic peptide (CNP). The present study was performed to investigate the effect of ANP on the proliferation and activity of ROS17/2.8 and HOS cells which are well-characterized osteoblastic cell lines. ANP dose-dependently decreased the number of ROS17/2.8 and HOS cells after 48-hour treatment. ANP generally increased the alkaline phosphatase activity of ROS17/2.8 and HOS cells after 48 hr treatment, regardless of the fact that basal activity of alkaline phosphatase was much lower in HOS cells compared to that of ROS17/1.8 cells. ANP increased the NBT reduction by ROS17/2.8 and HOS cells. ANP showed the variable but no significant effect on the nitric oxide production by ROS17/2.8 and HOS cells. ROS17/2.8 and HOS cells produced and secreted gelatinase into culture medium, and this enzyme was thought to be the gelatinase A type with the molecular weight determination. The gelatinase activity produced by ROS17/2.8 cells was increased by the treatment of ANP. However, the enzyme activity was not affected by ANP treatment in the HOS cell culture. In summary, ANP decreased the proliferation and increased the alkaline phosphatase activity and NBT reduction of osteoblasts. These results indicate that ANP is one of the important regulators of bone metabolism.

  • PDF

초음파를 적용한 PET 직물의 알칼리 가수분해에 관한 연구(II) - 기공특성과 올리고머 분석 - (A Study on the Alkali Hydrolysis of PET fabrics with Ultrasonic Application(II)- Surface Porosity and Oligomer Analysis -)

  • 김삼수;서말용;박성우;윤태희;이승구;허만우
    • 한국염색가공학회지
    • /
    • 제14권6호
    • /
    • pp.305-312
    • /
    • 2002
  • In order to give a silk-like touch to PET fabrics, the PET fabrics were treated with NaOH alkaline solution in various conditions. In alkaline treatment, the liquor flow type pilot weight reduction apparatus with magnetostrictive ultrasonic transducer was used for the study. The effects of ultrasonic application, treatment time and temperature at NaOH 4% and 6"A solution on the decomposition rate of PET fabrics. From the results of the decomposition rate of PET fabrics, the qualitative and quantitative analysis of oligomer after decomposition of PET fabrics carried out by the HPLC. On the other hand, the surface pore characteristics of decomposition PET fabrics measured by porosimetery. The pore characteristics on the surface of treated PET fiber depended on the decomposition rate and did not depend on the ultrasonic cavitation. The pore diameter of alkaline untreated PET fiber were 15A and those of treated PET fibers were 5~6$\AA$ at the maximum pore volume. The average pore sizes of fiber before and after treatment were 141 h and 160h, respectively. Total amount of oligomer of the untreated PET fibers were 1.70wt% and 67.7% of total oligomer occupied with PET cyclic trimer and PET cyclic tetramer. Total amount of oligomer of fiber with 26.9% and 48.0% of weight loss without ultrasonic application were 1.78wt% and 1.79wt%, respectively. Also total amount oligomer of fibers which were reduced 27.7% and 48.2% of weight loss with ultrasonic application were 1.74wt%. This result showed that the removal rate of oligomer in the process of alkaline hydrolysis with ultrasonic higher than that of without ultrasonic application.tion.

초음파를 적용한 PET 직물의 알칼리 가수분해에 관한 연구(I) - 분해속도상수와 활성화 에너지- (A Study on the Alkali Hydrolysis of PET fabric with Ultrasonic Application(I) - Decomposition Rate Constant and Activation Energy -)

  • 서말용;조호현;김삼수;전재우;이승구
    • 한국염색가공학회지
    • /
    • 제14권4호
    • /
    • pp.214-222
    • /
    • 2002
  • In order to give a silk-like touch to PET fabrics, the PET fabrics were treated with NaOH alkaline solution in various conditions. In alkaline treatment, the liquor flow type pilot weight reduction apparatus with magnetostrictive ultrasonic transducer was used for the study. The weight loss of PET fabrics hydrolyzed in 4% and 6% NaOH solution, at $95^\circ{C}$ and $99^\circ{C}$ for 60min. with ultrasonic application showed 3.7~4.6% higher than that of treated fabric without ultrasonic application. From the difference of specific weight loss, the treatment condition of the maximum of hydrolyzation effect appeared at $95^\circ{C}$ in $4^\circ{C}$ and at $90^\circ{C}$ in 6% NaOH solution, respectively. During the alkali hydrolysis of PET fabrics, the decomposition rate constant(k) increased exponentially with the treatment temperature and were not related with ultrasonic cavitation. The activation energy$(E_a)$ in decomposition of PET fabrics were 21.06kcal/mol with ultrasonic application and 21.10kcal/mol without ultrasonic application. The ultrasonic application gave a little higher value of the activation entropy$(\Delta{S}^\neq)$ and a little lower value of Gibbs free energy$(\Delta{S}^\neq)$ compared with not used ultrasonic apparatus.

열처리에 의한 폴리(트리메틸렌 테레프탈레이트) 섬유의 알칼리 가수분해 거동 (Alkaline Hydrolysis Behavior of Poly(trimethylene terephthalate) Fibers Annealed by Passing on the Plate Heater)

  • 홍석학;최창남;최희;이석영;송민규;김용
    • 한국염색가공학회지
    • /
    • 제15권3호
    • /
    • pp.132-139
    • /
    • 2003
  • PTT[Poly(trimethylene terephthalate)] fibers was annealed by passing on the plate heater to illuminate the effects of annealing on the alkaline hydrolysis behavior properties with varying the treatment temperature for 0.5 second. The L010 and crystallinity were increased with increases in temperature. With the increases of the temperature, the dynamic viscoelastic behaviors were analyzed to be reduction in $T_{max}(tan\;\delta)$. The weight loss in alkaline solution was two times more rapid for the PTT annealed at $200^\circ{C}$ than the control samples. The kinetics of hydrolysis was confirmed that the hydrolysis of the PTT fibers in the alkaline solution was started from the surface of the fibers and selective to the amorphous region in continuation, on the basis of the results of the increase in crystallinity and the decrease in dye uptake at the initial stage of the hydrolysis.

Monocrotophos induced inhibition of the activities of testis and accessory reproductive organs in male mice

  • Patill, Saraswati B;Malashetty, Vijaykumar B
    • Advances in Traditional Medicine
    • /
    • 제7권3호
    • /
    • pp.304-310
    • /
    • 2007
  • Monocrotophos was administered orally to adult male albino mice at dose level of 3.0 mg/kg body weight/day/mice for 50 days. The treatment has found to affect spermatogenesis as well as the endocrine functions of the testis as indicated by gravimetric, histopathological and biochemical changes. The treatment has caused degenerative changes in the seminiferous tubules and Leydig cells of the testis and regression of the epididymis, seminal vesicle, vas deferens, prostate, Cowper's gland and levator ani. Similarly, cauda epididymal sperm count and sperm motility have shown significant reduction. There was a significant reduction in the protein, glycogen, sialic acid, acid and alkaline phosphatase and increase in cholesterol in the testis of monocrotophos treated mice compared with the control. The causative factors for these changes due to monocrotophos administration were discussed.

자발적 환원반응에 의한 음이온 교환막 수전해용 Pt-Ni 나노 촉매 제조 및 특성 (Preparation and Characterization of Pt-Ni Nanocatalyst for Anion Exchange Membrane in Alkaline Electrolysis by Spontaneous Reduction Reaction)

  • 장붕비;이재영;이홍기
    • 한국수소및신에너지학회논문집
    • /
    • 제33권3호
    • /
    • pp.202-208
    • /
    • 2022
  • Pt-Ni nanocatalysts were loaded on carbon black by spontaneous reduction reaction of platinum (II) acetylacetonate and nickel (II) acetylacetonate, and they were characterized by transmission electron microscopy (TEM), thermogravimetric analyzer (TGA), energy dispersive x-ray analyzer (EDS), BET surface area and fuel cell test station. The distribution of the Pt and Ni nanoparticles was observed by TEM, and the loading weight of Pt-Ni nanocatalysts on the carbon black was measured by TGA. The elemental ratio of Pt and Ni was estimated by EDS. It was found that the loading weight of Pt-Ni nanoparticles was 5.54 wt%, and the elemental ratio of Pt and Ni was 0.48:0.35. Specific surface area was measured by BET analysis instrument and I-V characteristics were estimated.