• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.2
• /
• pp.26-33
• /
• 2016

The alkali-slag-red mud(ASRC) cement belongs to clinker free cementitious material, which is made from alkali activator, blast-furnace slag(BFS) and red mud in designed proportion. This study is to investigate strength and pore characteristics of alkali-activated slag cement(NC), clinker free cementitious material, and ordinary portland cement(C) mortars using polymer according to red mud content. The results showed that the hardened alkali-activated slag-red mud cement paste was mostly consisted of C-S-H gel, being very fine in size and extremely irregular in its shape. So the hardened ASRC cement paste has lower total porosity, less portion of larger pore and more portion of smaller pore, as compared with those of hardened portland cement paste, and has higher strength within containing 10 wt.(%) of alkali-activated slag cement(NC) substituted by red mud.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.6
• /
• pp.440-444
• /
• 2016

Owing to the introduction of various IT devices with emphasis on portability and design, the TFT (thin film transistor liquid crystal display) panel applied to IT devices has the same shape as the product, and the portability requirement of IT devices has resulted in a need for panels with higher rigidity. In this study, the effect of grinding conditions such as the feed rate and edge speed of edge grinding on the surface roughness and chipping of the machined surface is investigated using a metal bond wheel. During edge grinding of alkari-free glass, weak mechanical property of glass results in big chipping owing to generation of tensile stress at the end of grining operation. The results of this study show that the grinding characteristics of alkali-free glass are obtained and meet industry requirements.

• Korean Journal of Food Science and Technology
• /
• v.24 no.3
• /
• pp.247-250
• /
• 1992

Effects of free alkali and moisture on sucrose polyesters (SPE)-possible non calorie fat substitute-synthesis were investigated using a model system composed of sodium oleate, sucrose, potassium carbonate and methyl oleate. Trace amounts of free alkali in sodium oleate were found to interefere with SPE synthesis. When free alkali content in sodium oleate was varied gradually from 0% to 5%(w/w), the yield of SPE production was reduced from 92% to 45.5%. The moisture absorbed in sodium oleate, sucrose and potassium carbonate during storage also interefered with SPE synthesis. The yield (92%) of SPE production with dried ($105^{\circ}C$.6 hrs) reactants and catalysts was higher than that (89%) of SPE production with non-dried. Soybean oil fatty acid sodium soaps (FASS) not containing free alkali could be manufactured with slightly less than molar ratio of sodium hydroxide to soybean oil fatty acid methyl esters (FAME). Practically, 91.7% yield of soybean oil SPE production was outcomed by minimizing free alkali and moisture which were remaining in sucrose, potassium carbonate, soybean oil FASS and soybean oil FAME.

• Korean Chemical Engineering Research
• /
• v.45 no.6
• /
• pp.633-637
• /
• 2007

Electroless plating of Co-alloy thin films as capping layers for Cu interconnection has been investigated using alkali-free precursors such as $(NH_4)_2Co(SO_4)_2{\cdot}6H_2O$, $(NH_4)_2WO_4$, $(NH_4)H_2PO_4$, etc. The characteristics of the Co-alloy thin films were discussed by analyses of the effects of pH, Co-precursor concentration, and deposition temperature on the thickness and surface morphology of the films. The thickness of the Co-alloy thin films increased with increasing pH, Co-precursor concentration, and deposition temperature, similarly to the results of electroless plating of Co-alloy thin films using alkali-containing chemicals. The SEM images of the surface of the Co-alloy thin films showed that the proper ranges of pH and deposition temperature were 8.5~9.5 and $75{\sim}85^{\circ}C$, respectively. This work found a feasibility that Co-alloy thin films as capping layers for Cu interconnection could be electroless plated using alkali-free chemicals.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.1
• /
• pp.85-92
• /
• 2021

The purpose of this study is to investigate the properties of hardener-free epoxy-modified mortars(EMMs) using ground granulated blast furnace slag(GGBFS) and alkali activators. The hardener-free EMMs with a GGBFS content of 20% using 4 types of alkali activators were prepared with various polymer-binder ratios, and tested for strengths, water absorption, carbonation depth, chloride ion and H2SO4 penetration depth. The conclusions obtained from the test results are summarized as follows: The compressive strength of the EMMs with a GGBFS content of 20% attains a maximum at a polymer-binder ratio of 10%. The flexural strength of the hardener-free EMMs using Ca(OH)2 as a alkali activator is improved with increasing polymer-binder ratios. However, the flexural strength of the EMMs using NaCO3, Na2SO4 and Li2CO3 is gradually decreased with increasing polymer-binder ratios. Regardless of the type of alkali activator, the water absorption, chloride ion penetration and carbonation depth are remarkably decreased with increasing polymer-binder ratios due to the epoxy film formed in the EMMs. The H2SO4 penetration depth of the hardener-free EMMs with a GGBFS content of 20% is gradually increased with increasing polymer-binder ratio. In this study, the properties of hardener-free EMMs using Ca(OH)2 as a alkali activator are more excellent than those of other alkali activators.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.1023-1030
• /
• 2002

From the early 1980s, the New Austrian Tunnelling Method (NATM) has been developed as a one of the standard tunneling method in Korea. Approximately 10 years ago, wet-mix shotcrete with sodium silicate accelerator (waterglass) was introduced and widely used to tunnel lining and underground support. However, this accelerator had some disadvantages due to the decrease of long-term strength compared to plain concrete (without accelerator) and low quality of the hardened shotcrete. In order to compensate for these disadvantages, recently developed alkali-free accelerator has been successfully demonstrated in numerous projects and applications as a new material to make tunnels more durable and safer. An experimental investigation was carried out in order to verify the strength behavior of wet-mix Steel Fiber Reinforced Shotcrete (SFRS) with alkali-free accelerator. Compressive strength, flexural strength and equivalent flexural strength were measured by testing specimens extracted from the shotcrete panels. From the results, wet-mix SFRS with alkali-free accelerator exhibited excellent strength improvement compared to the conventional shotcrete accelerator.

• Journal of the Korea Concrete Institute
• /
• v.16 no.1 s.79
• /
• pp.70-78
• /
• 2004

Although set accelerating agents are used generally in New Austrian Tunneling Method, the standards for test methods and quality of set accelerating agents are not prescribed domestically. In this study, the proprieties of the various standards and the characteristics of set accelerating agents for shotcrete were evaluated. The alkali contents of set accelerating agents based on silicate, aluminate and cement were higher than those of alkali-free ones. From the result, it is thought that the quality control of aggregate should be enhanced and that the number of test cycle of alkali-aggregate reaction should be increased. The setting times of cement paste with set accelerating agents based on silicate and alkali-free ones were different largely with mixing methods. Compressive strength of mortar with set accelerating agents based on silicate, aluminate and cement at one day satisfied the specifications of Korea Concrete Institute. However, the strength ratio compared to control mix at 28 days showed as $50{\~}65\%$ except for the alkali-free set accelerating agents. As a results of setting time and strength test, the establishment of domestic standards that can reflect the characteristics of materials and construction methods of tunnels and that can increase quality of set accelerating agents is required immediately.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.10
• /
• pp.3321-3330
• /
• 2012

The complexation characteristics of mixed [2 + 2'] calix[4]aryl derivatives (3 and 4) with alkali metal cations were investigated by the mPW1PW91 (hybrid HF-DF) calculation method. The total electronic and Gibbs free energies of the various complexes (cone, partial-cone, 1,2-alternate, and 1,3-alternate) of sodium and potassium cations with 3 and 4 were analyzed and compared. The structures of the endo- or exo-complexes of the alkali metal cation with the host 3 were optimized using the mPW1PW91/6-31G(d) method, followed by mPW1PW91/6-311+G(d) calculations. The structures of the endo- or exo-complexes of the alkali metal cation with the host 4 were optimized using the mPW1PW91/6-31G(d,p) method. The mPW1PW91 calculated relative energies of the various conformations of the free hosts (3 and 4) suggest that the cone conformers of 3 and 4 are the most stable. The mPW1PW91calculations also suggest that the complexation efficiencies of the sodium ion with hosts 3 and 4 are about 24 and 27 kcal/mol better than those of the potassium ion, respectively. These trends are in good agreement with the experimental results. The exo-complexation efficiencies of the sodium ion toward the conformers of hosts 3 and 4 are roughly 14 and 17 kcal/mol better than those for the endo-$Na^+$-complexes of 3 and 4, respectively. The exo-complexation of the cone isomer of 3 with cation could be confirmed by the differences of the diagnostic C=O bands in the free host and its complex's IR spectra.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.10
• /
• pp.1129-1135
• /
• 1999

Free energy perturbation and molecular dynamics simulations were carried out to investigate the relative binding affinities of [17] ketonand (1) toward alkali metal cations in methanol. The binding affinities of 1 toward the alkali metal cations were calculated to be in the order Li+ > Na+ > K+ > Rb+ > Cs+, whereas our recent theoretically predicted and experimentally observed binding affinities for [18]starand (2) were in the order K+ > Rb+ > Cs+ > Na+ > Li+. The extremely different affinities of 1 and 2 toward smaller cations, Li + and Na+ , were explained in terms of the differences in their ability to change the conformation to accommodate cations of different sizes. The carbonyl groups constituting the central cavity of 1 can reorganize to form a cavity with the optimal M+ -O distance, even for the smallest Li+, without imposing serious strain on 1. The highest affinity of 1 for Li+ was predominantly due to the highest Coulombic attraction between the smallest Li+ and the carbonyl oxygens of 1.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.1
• /
• pp.76-84
• /
• 2013

In this study, some engineering properties of OPC and GGBFS shotcrete mortars with alkali-free or aluminate accelerator were experimentally examined. As a result, GGBFS mortars with alkali-free accelerator were significantly similar to OPC mortars with same accelerator with respect to both setting time and compressive strength. Comparatively, GGBFS mortars with aluminate accelerator showed a good performance with an increased replacement of GGBFS. Furthermore, when replaced with GGBFS over 50%, the mortars exhibited superior performances of electrical resistivity and chloride ions penetration resistance. Accordingly, it is suggested that GGBFS has a beneficial effect as shotcreting materials in the condition of proper replacement levels.