• Fisheries and Aquatic Sciences
• /
• v.13 no.2
• /
• pp.102-111
• /
• 2010

This study was conducted to investigate the optimal conditions of collagen extraction from scales of yellowfin tuna (Thunnus albacares) using surface response methodology. Four independent variables of NaOH concentration and pretreatment fime in alkali pretreatment and enzyme concentration and treatment time in enzyme hydrolysis were used to predict a model equation for the collagen yield. The determinant coefficient ($R^2$) for the equation was 0.906. The values of the independent variables for the maximum yield were 0.32 N NaOH, 16.38 h alkali pretreatment time, 0.18% enzyme concentration, and 31.02 h enzyme treatment time. In the physicochemical properties of tuna scale collagen, sodium dodecyl sulfate-polyacrylamide gel electrophoresis of tuna scale collagen showed the same migration distances as that of calf skin collagen. The amide A, I, II, and III regions of tuna scale collagen in Fourier transform infrared measurements were shown in the peaks of 3,414 $cm^{-1}$, 1,645 $cm^{-1}$, 1,553 $cm^{-1}$, and 1,247 $cm^{-1}$, respectively. The amount of imino acids in tuna scale collagen was 18.97% and the collagen denaturation temperature was $33^{\circ}C$. The collagen solubility as a function of NaCl concentration decreased to 4% NaCl (w/v) and the collagen solubility as a function of pH was high at pH 2-4 and sharply decreased from pH 4 to pH 7. Viscosity of the collagen solution decreased continuously until $30^{\circ}C$ and this decreasing rate slowed in the temperature range of $35-50^{\circ}C$.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.1
• /
• pp.82-89
• /
• 1998

Partial hydrolyzing condition for low-molecularized alginate and rheological properties such as viscosity, solubility, emulsitying ability, oil absorption capacity, bile acids binding and metal ion binding of the low-molecularized alginates from the sea mustard ( Undaria pinnatifida) and giant kelp (Macrocystis pyrifera) were investigated. Alginate from sea mustard was regularly hydrolyzed with the increase of HCl concentration in the range of 0.2 N to 0.5 N and with the prolonged reaction time at $100^{\circ}C$. The molecular weight of alginate was decreased to a part of 100 after hydrolysis for 50 min with 0.3 N HCl. The ratio of mannuronate to guluronate was increased with the acid hydrolysis and total yield was estimated to be $75\%\~80\%$. Low-molecularization of alginate was featured in the apparent decrease of viscosity, whereas solubility, emulsifying ability, and bile acids binding ability were increased with the low-molecularization. Oil absorption capacity of the acid$\cdot$alkali soluble alginate was slightly higher than that of the water soluble alginate. Metal ion binding capacity was the highest in acid$\cdot$alkali soluble alginate, and decreased with the low-molecularization.

• KSBB Journal
• /
• v.16 no.5
• /
• pp.523-525
• /
• 2001

Curdlan is one biopolymer composed of ${\beta}$1,3-glucan and dissolved in a alkali solution but formed salt under neutral or acid condition. It was produced by Agrobactrium species and the separation process is necessary to make pure curdlan from the culture broth. The pH swing separation method was as feasible separation process using solubility changes with the pH difference. however, this method requires a lot of acid and alkali solution also produces a lot of waste. Therefore, an efficient process which could save energy and minimize toxic waste was developed. A density gradient separation process was developed in this research. High density sucrose solution was used as a separation agent. Curdlan was separated from the culture broth when the density of the sucrose solution was 1.15 g/L. Since the curdlan was produced on the surface of cell wall. the pre-treatment of culture broth was necessary. Curdlan recovery yield was increased up to 83% with the homogenization of the culture broth and further increased up to 87% with the treatment of alkai-acid solution.

• Korean journal of food and cookery science
• /
• v.13 no.4
• /
• pp.379-383
• /
• 1997

To study the effect of amylose on the mechanism of gel formation, swelling power, water solubility, the pattern of alkali gelatinization and gel properties were investigated. The swelling power of waxy maize starch (Amioca) was the highest and followed by those of PFP > Amaizo > Amylomaize VII. Amioca showed higher iodine affinity of soluble amylose than other maize starches. The apparent viscosity of alkali gelatinization measured by Brookfield viscometer for Amaizo was 70${\times}$10$^3$cp which was higher than Amylomaize VII. The apparent viscosity of PFP was increased to 70${\times}$10$^3$cp and then decreased. As maize starches were autoclaved at 121$^{\circ}C$ with starch: water ratio (1 : 9) and autoclaving-cooling cycle were up to 4 times, gel properties were measured by rheometer. Amaizo showed the highest value for hardness, adhesiveness, springiness, and cohesiveness, and hardness of gel after two cycles of autoclaving-cooling was the highest. Gel properties seemed to be affected by the chain length of amylose rather than the content of amylose.

• Polymer(Korea)
• /
• v.24 no.6
• /
• pp.802-809
• /
• 2000

Counterion-specific helix formation and ion-selective transport of alkali metal chlorides (LiCl, NaCl, KCl, CsCl) were investigated for a poly(L-glutamic acid)(PLGA)/poly (vinyl alcohol)(PVA) blend membrane immersed in aqueous ethanol. The counterion specificity for helix formation of PLG alkali metal salts in the membrane was Li>Na>K>Cs. This specificity is ascribed to a contact ion-pair formation between the PLG carboxyl anion and the bound counterion, which depends on the energy balance between the electrostatic interaction and the desolvation. In aqueous ethanol, an appreciable ion-selectivity was observed for the permeability coefficient, i.e. Li$^{+}{\cdot}$Cl$^{-}$) formation between counterion and coion, and the latter to a specific interaction of diffusing counterions with polymer charges.

• Korean Journal of Food Science and Technology
• /
• v.20 no.3
• /
• pp.405-411
• /
• 1988

In this study, the treatment of $H_2O_2$, papain and acylation on the protein isolate obtained from defatted sesame oil cake for the changes in amino acids composition, color, digestibility and some functional characteristics of this protein were investigated. The results showed that $H_2O_2$, papain and papain $H_2O_2$ treatment increased the rates of the protein extraction and content of protein in protein isolates when those values were compared to the alkali treatment. Also amino acid composition of the protein isolates were comparatively good, and color, and functional properties and pepsin digestibility were markedly improved. The amount of lysine, the first limiting amino acid of this protein was increased. The solubility, bulk density, water absorption, fat absorption and emulsifying properties were remarkably improved while foaming properties and digestibility was slighly decreased.

• Applied Biological Chemistry
• /
• v.30 no.2
• /
• pp.133-140
• /
• 1987

The physicochemical properties and characteristics of potato starches which were isolated from the six varieties were investigated. The ash content of starch prepared from the Arkula showed lower than that of the other five samples. The shapes of starch granules were oval and round, and the average diameters were in the range of $25{\sim}26.9$ microns. The main constituents of the inorganic components of each starch sample were found to be phosphorus and potassium. The amylose contents of starches were between $27.2{\sim}32%$, and blue value, alkali numbers were in the range of $0.42{\sim}0.45$ and $5.8{\sim}7.7$, respectively. Amylograph data revealed that Nook Sack had the highest viscosity at all reference points. The swelling power and solubility patterns were negligible until $50^{\circ}C$, thereafter it increased rapidly.

• Proceedings of the SOHE Conference
• /
• 1997.12a
• /
• pp.45-49
• /
• 1997

To study the effect of amylose on the mechanism of gel formation, swelling power, water solubility, the pattern of alkali gelatinization and gel properties were investigated. The swelling power of waxy maize starch(Amioca) was the highest and followed by those of PFP ＞Amaizo ＞ Amylomaize Ⅶ. Amioca showed higher iodine affinity of soluble amylose than other maize starches. The apparent viscosity of alkali gelatinization measured by Brookfield viscometer for Amaizo was $70{\pm}10^3cp$ which was higher than Amylomaize VII. The apparent viscosity of PFP was increased to $70{\pm}10^3cp$ and then decreased. As maize starches were autoclaved at $121^{\circ}C$ with starch : water ratio (1:9) and autoclaving-cooling cycle were up to 4 times, gel properties were measured by rheometer. Amaizo showed the highest value for hardness, adhesiveness, springiness, cohesiveness, and hardness of gel after two times of autoclaving-cooling cycles was the highest. Gel properties was thus affected by the chain length of amylose rather than amylose content.

• Korean Journal of Food Science and Technology
• /
• v.28 no.3
• /
• pp.514-520
• /
• 1996

The purpose of this study was to develop the production technology of modified starch. Corn starches were gamma irradiated at 0-110 kGy and the effect of irradiation dose levels on the physicochemical properties of corn starches were investigated. Blue value linearly decreased, while alkali number and solubility markedly increased as irradiation dose levels were increased. The optical transmittance increased as applied irradiation dose levels were increased in the temperature range of $65-95^{\circ}C.$ Water binding capacity and swelling power showed maximum value at 30 and 10 kGy, respectively and they tended to decrease thereafter. Gelatinization viscosity of the gamma irradiated starch considerably decreased as compared to that of the non-irradiated starch. Irradiation at 110kGy resulted in a marked reduction of peak viscosity and cooling viscosity at $30^{\circ}C$ by 100 and 300 times, respectively. The physicochemical properties of corn starch irradiated at 30 kGy were similar to those of commercial acid-modified starch, while those of corn starch irradiated at 100 kGy were similar to those if oxidized starch.

• Korean Journal of Food Science and Technology
• /
• v.26 no.5
• /
• pp.484-489
• /
• 1994

Solubilization of plant ceil wall(tofu-residue) using enzyme complex obtained by Aspergillus niger CF-34 was attempted. The hydrolysis reaction was done at pH 4.0, $50^{\circ}C$, which were optimum pH and temperature of the enzyme, respectively. At the enzyme dosage of 2.5% (in terms of solid content of tofu-residue) and reaction time of 3 hr, the solubilizing percent of protein and carbohydrate were 62% and 50% respectively. Homogenization prior to enzyme reaction did not have much effect on tofu-residue solubilization. To improve solubility of tofu-residue, additional treatment such as alkali with 0.1% NaOH solution was found to be useful. The results showed that tofu-residue, which mainly consists of cell wall component of cellulose and hemicellulose, was not accessible to enzyme reaction and some prior treatment is required to enhance enzyme hydrolysis.