• 멤브레인
• /
• 제26권6호
• /
• pp.458-462
• /
• 2016

염수전기분해(saline water electrolysis) 또는 클로로-알칼리 막공정(chlor-alkali membrane process)은 양이온교환막과 전극으로 구성되는 전해셀에 전기를 가하여, 고순도(> 99%)의 고부가가치 화합물(예 : 염소, 수소, 수산화나트륨)을 직접 제조하는 화학공정이다. 염수전기분해의 경제성은 동일한 양의 화합물을 생산하기 위해 투여되는 에너지 소비량을 저감시킴으로 달성될 수 있다. 이러한 이슈는 전해질이나 전극의 고유 저항을 줄이거나, 전해질과 전극 사이의 계면 저항을 감소시킴으로 달성시킬 수 있다. 본 연구에서는 전자빔 동시조사법을 사용하여, 높은 화학적 안정성을 지닌 탄화수소계 술폰산 이오노머 막의 표면에 높은 이온선택성을 갖는 고분자를 접목 시키는 시도가 이루어졌다. 이를 통해, 고분자 전해질 막의 이온전도성을 보완함과 동시에, 전극과의 계면 저항을 감소시켜, 전기화학적 효율 향상이 이루어짐을 관찰하였다.

• Bulletin of the Korean Chemical Society
• /
• 제34권5호
• /
• pp.1525-1529
• /
• 2013

Pseudo-first-order rate constants ($k_{obsd}$) have been measured spectrophotometrically for the nucleophilic substitution reactions of 2-pyridyl thionobenzoate (5b) with alkali-metal ethoxides (EtOM, $M^+=Li^+$, $Na^+$, $K^+$, and 18-crown-6-ether complexed $K^+$) in anhydrous ethanol at $25.0{\pm}0.1^{\circ}C$. The plots of $k_{obsd}$ vs. $[EtOM]_o$ curve upward regardless of the nature of the $M^+$ ions, while those of $k_{obsd}/[EtO^-]_{eq}$ vs. $[EtO^-]_{eq}$ are linear with a positive intercept. Dissection of $k_{obsd}$ into $k_{EtO^-}$ and $k_{EtOM}$ (i.e., the second-order rate constants for the reactions with the dissociated $EtO^-$ and ion-paired EtOM, respectively) has revealed that the ion-paired EtOM is more reactive than the dissociated $EtO^-$, and $M^+$ ions catalyze the reactions in the order $K^+$ < $Na^+$ < $Li^+$ < 18C6-complexed $K^+$. The plot of log $k_{EtOM}$ vs. $1/r_{Stokes}$ results in an excellent linear correlation, indicating that the reactions are catalyzed by the solvated $M^+$ ions but not by the bare $M^+$ ions. The reactions of 5b with EtOM have been concluded to proceed through a six-membered cyclic TS, in which the solvated $M^+$ ions increase the electrophilicity of the reaction center and the nucleofugality of the leaving group.

• Journal of the Korean Wood Science and Technology
• /
• 제49권1호
• /
• pp.14-22
• /
• 2021

The objective of this study was to investigate the effect of alkali-washing with different sodium hydroxide concentrations on the chemical compositions of steam-treated Betung bamboo strand. Strands were subjected to steam treatment at 126 ℃ for 1 h under 0.14 MPa pressure and followed by washing with 1-5% sodium hydroxide solution for 30 sec. The alteration of structural and non-structural chemical components content of bamboo strands was evaluated. Steam and washing treatments with various concentrations of sodium hydroxide solution considerably reduced the extractive content of bamboo strands, and the cell wall chemical components of the strand in the small degree. FTIR analysis showed noticeable changes in peaks related to hemicellulose and lignin. The relative crystallinity increased significantly after steam and washing treatment with sodium hydroxide up to 3% concentration. SEM Images showed smooth and clean strands surface after washing with 3% sodium hydroxide.

• 한국건설순환자원학회논문집
• /
• 제8권4호
• /
• pp.528-536
• /
• 2020

본 연구에서는 천연골재의 대체골재로써 폐유리 잔골재(이하 GS)를 고강도 모르타르에 혼입하여 일반강도 모르타르와의 역학적 특성, 알칼리-실리카 반응(이하 ASR), ASR 후 모르타르의 잔류 역학적 특성을 비교·분석하였다. 실험 결과, GS를 모르타르에 혼입하는 경우, 혼입률이 증가할수록 역학적 특성 저하 및 ASR 증가 현상이 확인되었다. 특히, 모르타르의 고강도화는 GS의 Slip 현상을 개선하기에는 한계가 있을 뿐만 아니라, 오히려 ASR을 더욱 촉진하는 것으로 확인되었다. ASR 후 잔류 역학적 특성에서 반응 초기에는 강도가 증가하였으나, 반응이 지속됨에 따라 강도가 감소하는 경향이 나타났다. 이를 통하여, ASR 생성물이 GS의 Slip 현상을 개선할 가능성이 있을 것으로 사료된다. 따라서, 폐유리 잔골재 Slip 현상을 개선하기 위한 GS 표면 개질 및 ASR 저감을 위한 혼화재 사용 등과 같은 후속 연구가 필요하다고 판단된다.

• 한국의류학회지
• /
• 제29권5호
• /
• pp.671-679
• /
• 2005

Chitosan is the affinitive finishing agent and gives susceptible effect in textile finishing. In order to examine the modification of polyester fabric treated with chitosan, we observed the characteristic of polyester fabric surface and measured its physical properties. For the purpose of confirming the adhesion of cationic material, we made a comparative study on anionic acid dye. The fabric was treated with crosslinking agent after chitosan finishing. Glutardialdehyde as crosslinking agent was used to improve the fixation rate of chitosan on the polyester fabric. And the US value was increased according to increasing of chitosan concentration. As the concentration of crosslinking agent was increased, whiteness index of the fabric chitosan treated was increased. Moisture regain of the fabric treated with $1\%$ chitosan was doubled and that treated with $2\%$ chitosan was tripled comparing with original fabric. Tensile strength of the chitosan treated fabric had been an increase of $10\%$ compared with alkali treated fabric and crease resistance decreased regardless of chitosan concentration.

• Journal of the Korean Wood Science and Technology
• /
• 제48권6호
• /
• pp.861-868
• /
• 2020

The use of polyphenol extracts from radiata pine (Pinus radiata) bark as raw materials for bio-foams was investigated along with the optimal NaOH extraction conditions. The targeted yield of alkaline extracts was 60%, and the targeted pH was 11 to 12. The radiata pine bark was composed of 70% of a 1% NaOH extract, which contained mainly polyphenols, such as proanthocyanidin (PA). As the particle size of the bark decreased, the yield of the 1% NaOH extracts increased from 57 to 87%. A range of NaOH concentrations, liquor ratios, and extraction times were explored to establish an economic polyphenol extraction method. More than 60% of the alkaline extract was extracted, and the pH of the extract was approximately 12 when the optimum extraction conditions were employed, i.e., a liquor to bark ratio of 5:1, a NaOH dosage of 17 to 18% based on the bark weight, and a 1 h extraction time. Following neutralization of the alkaline extract, structural analysis indicated severe structural changes in the PA during the alkaline extraction. Because the alkaline extract was barely soluble in the solvent used for the structural analyses, it is assumed that chemical modification is required to increase the solubility of the alkaline extract for the production of bio-foams.

• 한국식품과학회지
• /
• 제23권6호
• /
• pp.759-763
• /
• 1991

게살과 구조적으로 유사한 대두단백 섬유는 dope를 방사하여 얻은 것으로, 대두단백의 dispersion이나 dope의 성질에 의존한다. 대두단백섬유의 출발물질인 대두단백의 dispersion과 dope의 동적 물성을 측정함으로서 그들의 점탄성을 조사하였다. 단백질 농도가 증가할때 dispersion이나 dope모두 단백질간의 상호반응이 일어났다. Dispersion에 알칼리 용액을 넣은 dope는 고분자 중합물질에 상호연결된 특성을 나타내었다. 반면에 dispersion에서는 무정형 중합물질의 특성이 나타났다. Dispersion에 대한 화학변형이 동적물성에 미치는 영향도 관찰하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.473-474
• /
• 2010

C-S-H(I)은 활성슬래그시멘트의 강도생성의 핵심물질이며 시멘트 수화물의 강도원천물질인 C-S-H의 구조모델로 사용되어 왔기 때문에, 나노 수준의 콘크리트 연구 분야에서는 세계적으로 아주 중요한 물질로 다루어지고 있다. 이러한 C-S-H(I)에서 발생되는 Si에 대한 Al 치환은 C-S-H(I)의 분자구조변경을 인위적으로 할 수 있다는 점에서 주목되어 왔고, C-S-H(I)의 기계적 물성치 (예, bulk modulus)에도 큰 영향을 미칠 것이라고 예상되어 왔었다. 그러나 본 연구를 통해 이러한 Al 치환이 실제로는 C-S-H(I)의 bulk modulus에는 거의 영향을 미치지 못함이 밝혀졌다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.24.1-24.1
• /
• 2010

In practical operation, the exposed surfaces may get dirty thus degrade the performance of devices. So the combination of self cleaning and antireflection is very desirable for use in outdoor photovoltaic and displaying devices, self cleaning windows and car windshields. For the purpose of self cleaning, the surface needs to be either superhydrophobic or superhydrophilic. However, in practice AR in the visible region and self cleaning are a pair of competitive properties. To satisfy the requirements for superhydrophobic or superhydrophilic surfaces, high surface roughness is required. But it usually cause severely light scattering. Photo-responsive coatings (TiO2, ZnO etc.) can lead to superhydrophilic. However, the refractive indices are high. Thus for porous structure, controlling pore size in the underwavelength scale to reduce the light scattering is very crucial for highly transparent and self cleaning antireflection coating. Herein, we demonstrate a simple method to make high performance broadband antireflection layer on the glass surface, by "carving" the surface by hot alkali solution. Etched glass has superhydrophilic surface. By chemical modification, it turns to superhydrophobic. Enhanced transparency (up to 97%) in a broad wavelength range was obtained by short time etching. Also antifogging effect has been demonstrated, which may offer advantage for devices working at high humidity environment or underwater. Compositional dependence of the properties was observed by comparing three different commercially available glasses.

• 펄프종이기술
• /
• 제46권6호
• /
• pp.94-102
• /
• 2014

The physical and chemical properties of recycled fibers from mixed waste paper are more and more deteriorated because of unknown history of recycling times. In order to improve the mechanical properties of liner paper, the recycled fibers from wasted cotton clothes were used in papermaking process, and their applicabilities were evaluated in several points of fiber modification. Thus, two kinds of fiberizing methods from waste cotton clothes were considered by using rotary sandpaper and grinder mill. Finally, the rotary sandpaper method was relatively desirable in preserving longer fiber length and fibrillated fiber surface. The recycled cotton fibers by swelling treatment with NaOH and bleaching with reductive chemicals were mixed with OCC fibers, and the handsheets were prepared to basis weight of $80g/m^2$ and evaluated the mechanical properties of paper. The fibrous properties showed outstanding results in freeness and WRV improvements by alkali treatment and high brightness by reductive bleaching treatment. The physical and mechanical properties of sheet by mixing OCC fibers and recycled cotton fibers were also highly improved in tensile, burst strength and specially folding resistance.