• 제목/요약/키워드: alkali metals

검색결과 144건 처리시간 0.028초

직업성 피부질환에 대한 현황 파악 및 관리 대책 수립을 위한 연구 (A Study on the Establishment of Management Methods about Occupational Dermatoses)

  • 임현술;정해관;최병순;김지용;성열오;김양호
    • Journal of Preventive Medicine and Public Health
    • /
    • 제29권3호
    • /
    • pp.617-637
    • /
    • 1996
  • Occupational dermatosis is one of the most prevalent occupational disorders. However, the extent of the occupational dermatoses including incidences and prevalencies of each disease entity, and etiologic materials are not yet welt stated in Korea. Authors reviewed the literatures on the statistic data and reports on the occupational dermatoses, and surveyed on the occupational dermatoses in two factories, and surveyed the physicians responsible to the occupational dermatoses with formed questionnaire. The results are as follows; 1. Among medical journals published since 1964, there were 31 articles on the occupational dermatoses. Of 31 articles, 18 were case reports and all others were review articles. Of 18 case reports, 9 were epidemiologic survey. The Workers' Periodic Health Examinations revealed that prevalence of the occupational dermatoses was highest(4.36 per 10,000 workers) in 1974, but number of the cases reported were decreased sharply since 1978 with some tendency to increase since 1981. There were 2,240 reported cases of occupational dermatoses between 1966 and 1992, which is 1.90% of all the reported occupational diseases. Skin infection and injuries due to chemicals were most frequent and there were 6 cases of skin cancer. 2. In an epidemiological survey on the dermatoses among 995 workers in a metal product manufacturing factory and 225 workers in a coal chemical factory, there were 794 with dermatomycosis, 296 workers with acne, 130 workers with scar, 123 workers with deformity of toe nails. Scars, photosensitivity dermatitis, deformity of finger and toe nails, and acne were more prevalent in the metal product manufacturing factory(p<0.05). In the metal prouct manufacturing factory, workers treating organic solvents and oils had more dermatoses than those without treating the materials(p<0.05). On the skin patch performed on 16 workers in the metal product manufacturing factory, there were 8 cases of irritation dermatitis and 5 cases of contact dermatitis. Prevalence of contact dermatitis in the metal product manufacturing factory was 1.3%. 3. On the questionnaire survey, 34 dermatologists, 29 doctors of preventive medicine, and 22 family physician replied. The proportion of occupational etiology among all dermatoses assumed by the physicians were below 9%, and the most important occupational dermatosis in Korea was contact dermatitis. Main etiologic materials related to the occupational dermatosis were organic solvent, acid and alkali, and metals. The reason for the scarcity of report of occupational dermatoses were difficulty in diagnosis and physician's ignorance of the occupational etiology. They replied that to prevent the occupational dermatoses in the workplace, the use of protective devices was most important, and development of diagnostic criteria on the occupational dermatoses is urgent. Above results shows us that there is many workers with occupational dermatoses, but they are mostly unreported. Measures to prevent and manage the occupational dermatoses are not satisfactory at present. Hence, authors suggest measures for the precise diagnosis, report and prevention of the occupational dermatoses. a. Dermatologist, preventive physician, and industrial hygienist should work as a team to examine the high risk group and establish the preventive measures. b. Disease entities, diagnostic criteria of occupational dermatoses should be listed, criteria for the compensation and job fitting at recruitment should be established, and manual for the proper treatment and effective prevention of each occupational dermatosis should be developed. c. Patch test antigens against each occupational category should be developed and it should be available to any physicians responsible. d. To facilitate the diagnosis of occupational dermatoses by the doctors responsible for the Workersr Periodic Health Examination, development of standardized questionnaire, education on the techniques of the patch test, and cooperation with the dermatologist in diagnosis of occupational dermatoses is essential.

  • PDF

Dithizone 금속착물의 용매추출 및 분석적 응용(제1보). 뇨중 흔적량 중금속 원소의 분리 정량 (Studies on Solvent Extraction and Analytical Application of Metal-dithizone Complexes(I). Separation and Determination of Trace Heavy Metals in Urine)

  • 전문교;최종문;김영상
    • 분석과학
    • /
    • 제9권4호
    • /
    • pp.336-344
    • /
    • 1996
  • 뇨시료 중 혼적량의 코발트, 구리, 니켈, 카드뮴, 납 및 아연을 흑연로 원자흡수분광 광도법으로 정량하기 위한 dithizone이 포함된 chloroform으로의 용매추출에 관하여 연구하였다. 실험조건인 시료의 전처리 과정, 추출용액의 pH, 킬레이트제인 dithizone의 농도, 역추출할 때 사용하는 산의 종류와 농도에 관하여 최적화하였다. 유기물의 방해를 제거하고자 뇨시료 100.0mL에 진한 질산 30mL를 가하고 30% 과산화수소 50mL를 5.0mL씩 단계적으로 가하면서 가열하여 유기물질을 분해하였다. 삭힌 뇨시료를 100mL로 만들어 분별 깔때기에 넣고 시판용 완충용액으로 pH가 8이 되게 조절한 다음 0.1% dithizone을 포함하는 chloroform 15.0mL를 가했다. 진탕기(shaker)를 이용하여 90분 동안 흔들어 준 후 상분리시켜 용매층을 분리하였다. 카드뮴, 납, 아연은 0.2M 질산용액 10.0mL로 역추출하여 직접 정량하였고, 이런 조건으로 역추출되지 않은 코발트, 구리, 니켈은 유기 용매를 증발 건고시킨 다음 잔류물을 $HNO_3$ $H_2O_2$로 녹이고, 정확히 10.0mL가 되게 탈염수로 묽혀서 정량하였다. 최적의 추출조건을 찾기 위하여 인공 뇨시료를 제조하여 검토하였고, 얻은 최적조건으로 검정곡선을 작성하였다. 삭힌 각 시료에 일정량 첨가된 원소를 정량하여 얻은 회수율은 77 내지 109%였고, 검출한계는 Cd(II) 0.09, Pb(II) 0.59, Zn(II) 0.18, Co(II) 0.24, Cu(II) 1.3, Ni(II) 1.7ng/mL였다. 이로써 본 방법이 과량의 유기물과 알칼리 및 알칼리 토금속이 포함된 뇨시료에서 혼적량 원소들을 정량적으로 분리 분석할 수 있음 을 알았다.

  • PDF

보은제일폐탄광 주변 하천수의 지구화학적 특징 (Geochemistry of Stream Water around the Abandoned Boeun Coal Mine, Hoenam Area)

  • 전서령;신익종;이규승
    • 한국환경농학회지
    • /
    • 제20권1호
    • /
    • pp.20-27
    • /
    • 2001
  • 보은광산지역 하천수의 pH는 $6.8{\sim}8.2$로 약산성에서 약 알카리성에 걸친 수질변화를 보여주며, 건기보다는 우기의 하천수가 산성우의 영향으로 인해 다소 pH가 낮게 나타났다. 방치된 폐석 등의 영향으로 Mg, Ca, $HCO_3$, $SO_4$, Al, Fe, Zn, Ni, Co, Cr, Cd, Sr, U 이 하천수내에 부화되어 나타나며, Na, K, As, Cu, $NO_3$, Cl 등은 낮은 농도함량을 보여 이들 원소에 대해 폐광석으로부터의 영향이 거의 없는 것으로 보인다. 주요 양이온 농도는 Mg>Ca>Na>K의 순서로 함량변화를 보이며, 음이온의 함량변화는 $SO_4>HCO_3>Cl>NO_3$의 순서로 나타나 본 하천수는 $Mg-SO_4$ 타입을 보인다. 하천수의 우기와 건기의 이온의 농도변화는 ${\pm}30$ % 이내에서 나타나며, Na, K, $HCO_3$, U, Sr, Cr은 우기 중에 낮은 농도를 보여 우수에 의해 희석되어졌을 가능성이 크다. 우기중에 높은 농도를 보이는 Ca, Mg, $NO_3$, Cd, Co는 약산성의 우수에 의해 기반암이나 폐석으로부터 쉽게 용출되는 원소들이라 판단되었다. TDS, EC 및 Ca, Na, Mg, $HCO_3$, $SO_4$, Fe, Ni, Sr, U등의 원소는 광산으로부터 멀어질수록 하류를 향해 농도가 감소하는 경향을 보여, 이들 원소에 대해서 광폐석이 특히 주요한 오염원으로 작용하고 있으며, 이들 원소의 농도를 컨트롤하는 인자는 희석작용이나 흡착작용 등이 복합적으로 관여하고 있을 것으로 생각된다. 본 광산지역의 하천수내에 일어나는 화학적 현상은 크게 두 가지로 얘기할 수 있다. 철을 함유한 황화광물(황철석 등)의 산화로 인한 Fe과 $SO_4$의 하천수내에 부화현상과 풍화된 기반암에서 탄산의 용출이나 이온교환작용에 의한 중화작용으로 하천은 산성을 띠기보다 오히려 약 알카리성을 띠는 특징을 보인다. 기반암의 영향으로 하천의 지나친 산성화는 일어나지 않을 것으로 보이나 하천내의 이온함량은 비오염수에 비해 극히 높은 값을 보여 방치된 폐석이 잠재적인 위험성을 내포하고 있음을 시사한다. 또한 알카리상태에서 부화된 철은 철수산화물의 형태로 침전되어 하천의 적화현상을 일으키는 주원인 물질로 작용한다. 이들 철산화물은 침전되면서 동시에 하천내의 용존 중금속을 흡착이나 공침에 의해 동시에 침전시키는 역할을 하는 것으로 방치될 경우 2차적 오염원으로 작용할 우려가 있어, 이들 철산화물에 대한 보다 상세한 연구가 필요하다고 사려된다.

  • PDF

해초류를 이용한 천연 바이오 접착제 개발 기반 연구 (Base Study Related with Development of Natural Bio-Adhesives Using Seaweeds)

  • 한원식;오승준;김영미;이유진;김예진;박민선;위광철
    • 보존과학회지
    • /
    • 제34권6호
    • /
    • pp.595-604
    • /
    • 2018
  • 종이 공예 및 한지 산업, 문화재 보존 등에 활용을 위한 천연 바이오 접착제를 개발하기 위해 해초류 중 갈조류, 홍조류의 복합 다당류를 추출하여 이를 접착 성분으로 사용하였다. 갈조류는 감태, 다시마, 대황, 미역, 홍조류는 도박, 우뭇가사리, 풀가사리, 후노리로 갈조류와 홍조류에 포함된 비수용성 Ca 착물 형태의 다당류를 수용성의 1 가 알칼리 금속이 포함된 수용성 다당류들로 변형하여 추출하고 알코올 침전을 이용하여 다당류만을 얻고자 하였다. 갈조류는 다시마의 접착 인장 강도가 21.58 kgf, 홍조류는 도박이 32.99 kgf를 나타내어 물풀(18.45 kgf)과 딱풀(20.45 kgf)로 알려진 고체풀의 접착력에 상회하는 결과를 나타내었다. 이 추출된 다당류들은 추출 환경에 따라서 추출 수율이 결정되었지만, 접착도에는 차이를 나타나지 않고 있어서 추출 환경이 아니라 생육 환경에 의해 다당류의 형태가 결정되어지는 것을 알 수 있었다. 추출 시에 다단계의 알코올 침전법을 사용함으로 추출 과정에서 단백질 및 기타 다당류를 제외한 구성 성분들이 제거된 결과가 나타나서 곰팡이 배양이 되지 않는 안정한 결과를 보이고 있었으며, 단순 용해에 의한 접착제 제작 후에도 곰팡이의 발생이 없어서 친환경 접착 재료로서의 사용이 가능한 결과를 나타내었다.