• Economic and Environmental Geology
• /
• v.33 no.2
• /
• pp.139-146
• /
• 2000

Development of an effective liner by utilization of the tailings frm the Imcheon mine and polymer has been tried. The tailings piled in the Imcheon mine, whose true specific gravity is about 2.86, are composed mainly of quartz, alkali-feldspar, muscovite and pyrite, and mostly (93.7% in volume) coarser than sand grain size (50${\mu}{\textrm}{m}$). Strength, leaching and permeability tests have been performed on the test specimens of polymer concrete manufactured with various mixing proportions of tailings, unsaturated polyester resins(UPR), calcium carbonates, stone powder sludges and granite soils. Polymer concrete specimens with stone powder sludges or granite soils as fillers and aggregates indicate 2.5 to 3 fold higher flexural and compressive strengths and lower permeabilities than those with calcium carbonates, which shows their usability as a waterproof liner. Also, the polymer concrete liner with stone powder sludge fillers is more advisable in aspects of utilization of waste sludges than that with other fillers.

• The Journal of Engineering Geology
• /
• v.15 no.2 s.42
• /
• pp.169-184
• /
• 2005

Unagsan and Sogrisan granites are widely distributed in the northern Gyeonggi massif and middle Ogcheon belt, respectively, and they show different petrologic characteristics as follows. The former has compact textures and light grey colors, and the latter has spotted miarolitic textures and pink colors. Most of the samples selected for tests are fresh and coarse-grained. And bored core samples were prepared so that they are vertical to the rift plane. The results of modal analysis show that Unagsan granite has significantly higher quartz and plagioclase contents (Qz+Pl) than Sogrisan granite. In contrast, alkali feldspar content (Af) of Sogrisan granite is much higher than that of Unagsan granite. Therefore, it is believed that the light grey colors of Unagsan granite are due to relatively high Qz+Pl, and the pink colors of Sogrisan granite are caused by higher Af. Fractures in Sogrisan granite have strongly perpendicular strike patterns and more dip values close to vertical compared with the fractures in Unagsan granite. Results of the fracture pattern analysis suggest that the Sogrisan granite has better potential to produce dimension stones than the Unagsan granite. However, miarolitic textures often found in the Sogrisan granite may be one of the factors reducing the granite quality. The Unagsan and Sogrisan granites have similar specific gravity values of 2.60 and 2.57, respectively. Absorption ratios and porosity values of Sogrisan granite are higher than those of Unagsan granite, and they shows linearly positive correlations. Compressive and tensile strengths of the Unagsan granite are generally higher than those of Sogrisan granite. These differences and variation trends found in physical properties of Unagsan and Sogrisan granite can be explained by the differences in the textures of Unagsan and Sogrisan granites, namely compact and miarolitic textures respectively. For Unagsan granite, compressive and tensile strengths are negatively correlated with porosity but for Sogrisan granite no specific correlations are found. This is probably due to the irregular dispersion patterns of miarolitic textures formed during the later stages of magmatic processes. Contrary to the trends found in absorption ratios, both granites have similar values of abrasive hardness, which can be explained by higher Qz+Af of the Sogrisan granite than those of the Unagsan granite and that quartz and alkali feldspar have relatively larger hardness values. For Sogrisan granite, compressive strength shows slightly positive correlations with Qz+Af+Pl and negative correlations with biotite and accessory mineral contents (Bt+Ac).

• Korean Journal of Soil Science and Fertilizer
• /
• v.6 no.3
• /
• pp.141-152
• /
• 1973

The mineralogical studies of the eleven sub-soil samples derived from granite, granodiorite, diorite and arkose sandstone, taken from apple orchards in the province of Kyungsangbukdo, Korea are made to investigate the relationships between the mineral weathering, soil forming processes and mineralogical composition. The fine sand fraction (less than 0.2mm) and the clay fraction (less than 2 micron) are dispersed with the shaker after hydrogen peroxide treatment for the removal of organic matter, and separated from each suspension by gravity sedimentation. The fine sand are observed by mineral microscope and the clay are observed by X-ray diffraction patterns, differential thermal analysis curves and infrared spectrum. The outline of the results are as follows. 1. The primary minerals ; Quartz, changed-feldspar, plagioclase, alkali-feldspar are dominant in almost all samples, and some samples contain an appreciable amount of hornblende, biotite, muscovite and plant opal. There are also those samples which contain very small quantity of pyroxene group, tourmaline, epidote, cyanite, magnetite, volcanic glass and zircon. They are mainly derived from weathering products of granite, granodiorite, diorite, arkose or its mixtures. 2. All samples contain expanding or nonexpanding $14{\AA}$ minerals, illite and kaolin minerals, and some samples contain chlorite, cristobalite, gibbsite, and those primary minerals as quartz and feldspar, but the quantities vary according to the parent matrials. 3. Non-expanding $14{\AA}$ minerals may be dioctahadral vermiculite which sandwiches gibbsite layer or chlorite in between layer lattices. 4. As for clay minerals, montmorillonite was principal component in the samples derived from weathering products of arkose sandstone and tertiary. Minerals which are derived from weathering products of arkose have kaolin minerals and vermiculite as their principal component, and minerals derived from weathering products of acidic rock group are generally classified into two groups, the kaolin mineral group, and the kaolin minerals and vermiculite group.

• Economic and Environmental Geology
• /
• v.12 no.3
• /
• pp.115-126
• /
• 1979

The Jecheon granite mass has turtle-shape exposure of about $190km^2$ at vicinity of Jecheon-eup, and is elongated in the direction of NEE-SWW. It discordantly intrudes the Bakdalryong metamorphic rocks and the great limestone series(Samtaesan and Hungwolri formation) which belong to the pre-Cambrian and Ordovician, respectively. The mass is composed of five facies of different grain size; texture and charecteristic minerals. The five facies are (1) coarse grained biotite granodiorite, (2) fine grained hornblende biotite granodiorite, (3) coarse grained pink feldspar granodiorite (4) leucogranite, and (5) porphyritic biotite granite. The mutual relationship between each facies is intrusion in (1)-(2) and (2)-(3), but unknown in (3)-(4) and (4)-(5). 22 modal analyses and and 10 chemical analyses on more than a hundred of representative samples taken from the mass are listed as tables. Triangular plot of modal and normative Q-Kf-Pl of this mass show a continuous differentiation products from certain common magma by change of chemical composition and anorthite contents in plagioclase. The metamorphic facies of contact aureole in surrounding rocks adjacent to the granite body are corresponded to hornblende hornfels facies with mineral assemblages of wollastonite-diopside-calcite in calcareous rocks, and of quartz-biotite-muscovite-cordierite in argillaceous rocks. Variation of silica versus oxides of major elements shows that the mass is similar to the trend of Daly's average basalt-andesite-dacite-rhyolite which shows the trend of the fractional crystallization of magma, and is equivalent to the calc-alkali rock series by Peacock. AMF diagram shows that Jecheon granite mass is equivalent to normal diffentiation products such as skaergaard intrusion. The above evidences suggest that the Jecohon granite mass is normal differentiation products formed by fractional crystallization under relatively slow cooling condition.

• The Journal of the Petrological Society of Korea
• /
• v.21 no.4
• /
• pp.405-413
• /
• 2012

This study demonstrates the consolidation effect of ethylsilicate consolidants considering material characteristics and weathering degree of Samneunggyeseongakyukjonbul(rock-carved Yukjonbul Buddha in Samneung Valley) in Namsan, Gyeongju. The buddha statue is composed of alkali feldspar granite and contains numerous sets of joint with exfoliation and granular disintegration, therefore the statue is necessary to be treated for surface strength. The laboratory and in-situ tests of consolidation effect showed more increase of ultrasonic velocity that KSE 300, a relatively highly concentrated consolidant, performed more increase of ultrasonic velocity and decrease of porosity than others after treatments in weathered granite. And the consolidated rock with OH 100 was more resistant to salt weathering. For the buddha statues, KSE 300 is more applicable to enhance surface strength because it showed higher consolidation effect for long term than OH 100 and the statues has not been weathered by salts.

• The Journal of the Petrological Society of Korea
• /
• v.8 no.2
• /
• pp.81-91
• /
• 1999

The area of the study is located in Ogcheon district, middle part of Ogcheon Fold Belt. The area is covered by metasedimentary rocks of Ogcheon Supergroup at northern, eastern and southern part. Jurassic Ogcheon granite which intruded into Ogcheon Supergroup at central part, was intruded by Cretaceous quartz porphyry at western part. The granite consists of quartz, plagioclase, alkali feldspar, biotite, sphene, apatite, epidote, opaque and so on. It is generally characterized by grey to light grey, medium-grained, mafic enclave and partly weak foliation. In terms of geochmical compositions, the granite is felsic, peraluminous, subalkaline and calc-alkaline, and it was differentiated from single granitic magma. It shows parallel LREE enrichment and HREE depletion patterns with 0.84 Eu negative anomaly, which has REE variation trend and anomaly value similar to Jurassic granites in Korea. From charactristics of petrology, mineralogy and geochmistry, it may be interpreted that the Ogcheon granite body was derived from melting of I-type crustal material related to syn-collisional tectonic setting and emplaced more or less rapidly into the Ogcheon Supergroup.

• Economic and Environmental Geology
• /
• v.23 no.3
• /
• pp.343-352
• /
• 1990

The Cretaceous granites are widely distributed in the studied area, Mungyeong-Sangju, which belongs to the southwestern part of the Ogcheon Folded Belt. The granites are characterized by medium-coarse grained, spotted miaroles, partly flow textures of biotite, aplitic dykes and pegmatitic pockets with druse. From the major compositions, the granites indicate peraluminous, calc-alkaline, salic and late stage products of differentiation. In the view of normative compositions of Qz-Ab-Or and perthitic alkali feldspar, they were formed under 1-4kb and $426^{\circ}-456^{\circ}C$ in acqueous conditions. The K/ Ar biotite age shows $72{\pm}1$ Ma for this grante, corresponding to the igneous activity of the Bulgugsa Disturbance periods in the area. The above results represent that these granite bodies are differentiated from a single magma.

• The Journal of the Petrological Society of Korea
• /
• v.5 no.1
• /
• pp.21-34
• /
• 1996

Contact-metamorphosed calc-silicate hornfels of the Hwanggangni formation adjacent to Daeyasan granite in Goesan are characterized by the mineral assemblages. tremolite-clinozoisite-alkali feldspar-calcite, diopside-grossular-vesuvianite, and wollastonite-diopside-phlogopite-grossular-vesuvianite, indicating low $X_{CO_2}$ condition during contact metamorphism. Two trends of fluid-rock interactions are recognized; combination of infiltration and buffering in the outer portion of the aureole and fluid-dominated behavior in the most part of the aureole. Modal abundance of diopside produced during metamorphism was measured in order to estimate fluid/rock ratios and permeabilities with the assumption that equivalent volume of fluids estimated from the fluid/rock ratios flow through the rock body. The calculated fluid/rock rations and permeabilities range from 0.6 to 9 and $10^{-19}$ to $10^{-17}$ meabilities in the calc-silicate hosted contact aureoles and expected values during progressive metamorphism by theories.

• Economic and Environmental Geology
• /
• v.31 no.5
• /
• pp.365-374
• /
• 1998

Economic U- and Th-bearing pegmatite deposits occur in the Kyemyeongsan Formation, and are spatially closely associated with the Carboniferous alkali granite. The pegmatite is lithochemically alkaline and peralumious, and consists mainly of potassic feldspar and quartz with allanite and U- and Th-bearing minerals. Paragenetic stages of mineralization in the pegmatite are divided as follows: early silicate mineralization, main rare metal mineralization, and late silicate mineralization. Thorite, euxenite, fergusonite and uranpyrochlore are the predominant U- and Th-bearing minerals. Both the enrichments of Nb, Y, Th, U, and Ta and the depletions of Hf, Ba, and Rb in the pegmatite were resulted from magmatic differentiation. The increases of Na and Ca in uranpyrochlore, of Th and U in fergusonite, of Si, Th, U and Pb in thorite, and of Nb and Y in euxenite were possibly resulted from both later internal fractionation and hydrothermal alteration. The variation of chemical composition in a mineral species reflects the different pysico-chemical conditions during the crystallization.

• 보존과학연구
• /
• s.28
• /
• pp.39-58
• /
• 2007

The Seated Buddha image carved on rock surface of Yuneulgok in Bae-ri, Gyeongju constituted of alkali feldspar granite. There is surface weathering by abrasion, exfoliation and break out. As a result various experiment was carried out testing rock material property to quantitatively grade weathering. Besides, this study is focused on properties of rock and correlation between things. Additionally, comparison of chemical properties to nondestructive weathering grade in the buddha image carved on rock. This result utilized on important resource for scientific conservation system compared with weathering appearance.