• Journal of the Korean Wood Science and Technology
• /
• v.32 no.2
• /
• pp.26-32
• /
• 2004

Chemical compositions and chemical structure of lignin and alkali cooking condition and fiber length of red pepper were investigated and compared to those of woods. The chemical compositions of red pepper were higher component of extraction than that of wood. The contents of carbon and hydrogen of Klason lignin in red pepper were similar to that of pine and birch wood. On the other hand, the contents of oxygen and nitrogen of Klason lignin in the red pepper were higher than that of wood. The result of nitrobenzene oxidation shows that Klason lignin of red pepper was similar to lignin of softwood. The best alkali cooking condition of red pepper was 0.2%-anthraquinone, active alkali of 20% and liquor ratio of 1:7. The fiber length of red pepper was about 0.47 mm. Therefore, the red pepper fiber will be able to use special purpose of short fiber.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.22 no.4
• /
• pp.500-509
• /
• 1993

Pectins present in the primary cell walls and middle lamellae of plant cell walls are extracted by water, cheating agents, acid or alkali solutions. However, some neutral contaminating components are extracted in conjunction with pectins during the extraction process. Thus, the accurate characterization of physi-cochemical properties of pectins necessitates to get rid of the impurities. In this review, dialysis, alcohol precipitation, ion exchange chromatography and metal precipitation were compared as procedures to purify the pectin extracts. In addition, the chemical methods to analyze pectins are discussed in terms of three major chemical constituents, i.e., anhydrogalacturonic acid, methoxyl groups and neutral sugars.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.8 no.1
• /
• pp.71-87
• /
• 1990

This paper presents a simple algorithm to obtain three dimensional information of an object. In the preprocessing of the stereo matching,feature point informations of stero image must be less sensitive to noise and well liked the correspondance problem. This paper described a simple technique of struture feature extraction of 3-D object and used edge-end point expanding method for unconnected line instade of Hough transform. The feature such as corner point and their angles are used for matching problem. The experimental results show that the described algorithm is a useful method for stereo correspondence problem.

• Resources Recycling
• /
• v.9 no.3
• /
• pp.29-36
• /
• 2000

A study on the recovery of gallium from leaching solutions is carried out by solvent extraction in order to produce gallium oxide of high purity. The results show that the extraction of gallium is found to be increase with acidities of aqueous solution up to 7.4 M/L when pure isopropyl ether is used. And the extraction of iron also increases with increasing acidity of aqueous solution. It appears that the separation of gallium from iron cannot be satisfactorily accomplished with isopropyl ether. But, in the case of extaction with D2EHPA, almost complete extraction of iron is achieved-leaving all the gallium in the aqueous solution-by maintaining the acidity of aqueous solution at 2 M/L. Accordingly, $Ga_2O_3{\cdot}H_2O$ of more than 99wt.% in purity can be produced from zinc residues through the processes comprising of alkali leaching, precipitation by neutralization and solvent extraction using isopropyl ether and D2EHPA as extractants.

• Preventive Nutrition and Food Science
• /
• v.22 no.3
• /
• pp.223-230
• /
• 2017

The purposes of this study were to produce polysaccharides from red pepper stems using different extraction methods and evaluate their chemical composition, in vitro biological capacities, and rheological properties. Two polysaccharides were extracted from red pepper stems using an autoclave and alkali treatments, and the extracts were named PAU and PAL, respectively. The contents of total phenolics and flavonoids were significantly higher in PAU than those in PAL. PAU exhibited greater scavenging activities on 2,2-diphenyl-1-picrylhydrazyl radicals, 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt radicals, superoxide radicals, and nitrite compared to PAL, suggesting that PAU served as better antioxidants. Similarly, in vitro inhibitory abilities against carbohydrate hydrolyzing enzymes of PAU were higher than those of PAL. Steady shear rheological analysis demonstrated that PAU showed higher psuedoplastic shear-thinning behavior compared to PAL. Based on the results from dynamic shear rheological properties, it was found that both samples had predominantly viscous behavior rather than elastic behavior.

• Microbiology and Biotechnology Letters
• /
• v.25 no.2
• /
• pp.183-188
• /
• 1997

Antimicrobial activity of various extracts of Xanthium strumarium L. was tested against 25 strains of bacteria, yeast and fungus. The crude ethylacetate extract exhibited strong growth inhibition to the tested strains with the exception of partial Gram-negative bacteria. The property of antimicrobial compound was very stable under heat treatment at $120^{\circ}C$, but it was unstable in acid (pH 3.0) and alkali (pH 10.0) treatment. The antimicrobial compounds were purified by boiling water extraction, ethylacetate extraction, charcoal column chromatography, silica gel column chro- matography and reverse phase HPLC. The purified compound A and B were detected in a single peak (each above 98% purity) through the HPLC analysis. The compound A and B showed a strong growth inhibition against Gram-negative and positive bacteria in the agar diffusion method. When tested by the FDA method using the esterase, compound A mainly inhibited the growth of bacteria and compound B showed the growth inhibition of both bacteria and yeasts.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.04a
• /
• pp.242-246
• /
• 2005

The heavy metal analysis (Cd, Pb, Cu, Cr, Zn, Ni) with various extraction methods was performed using the certified sample and real soil sample. In case of the certified samples, $10.5{\sim}118%$ of recovery was showed with various ranges depend on the metal kinds and extraction methods. Also, the alkali-digestion method was showed the proper results by applying in hexavalent chromium. In case of real sample, compared to amounts of heavy metals extracted using 0.1N-HCl, those extracted using acid digestion are higher by $3{\sim}24$ times in Cu, $1.1{\sim}1.5$ times in Cd, $2{\sim}23$ times in Pb, $3{\sim}104$ times in Zn, $12{\sim}101$ times in Ni, $30{\sim}202$ times in Cr. There is no considerable difference between four acid digestion methods.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.3
• /
• pp.271-275
• /
• 1999

The chemical and gelling properties of porphyran from Porphra yezoensis collected from Buan and Wido in Korea at different months of the year were studied. Crude porphyran was prepared by hot-water extraction and further purified by cetylpyridinium chloride precipitation, Crude porphyran and porphyran were modified by alkali treatment to eliminate sulfate. The yields of alkali-modified crude porphyran (AMCP) and porphyran(AMP) were between $4.9\~10.9\%$ and $4.0\~6.7\%$ of the dried algae weight and were maximum in February for Buan and January for Wido, respectively. Gel strength of AMCP were highest in February ($790g/cm^2$) for Buan and January ($740 g/cm^2$) for Wido. Alkali modification increased 3,6-anhydro galactose content and the molar ratio of galactose and 3,6-anhydrogalactose of AMCP and AMP showed 1 : 0,8$\~$1.1. GLC and FT-IR measurement of AMP showed that most of sulfate residues were combined to C-6 of galactose, Thus, results of this study suggest that crude porphyran extracted from Porphra yezoensis produces an agar of a reasonably good quality after alkali treatment.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.259-263
• /
• 2001

There are several steps such as slicing, lapping, chemical etching and mechanical polishing in the silicon wafer production process. The chemical etching step is necessary to remove damaged layer caused In the slicing and lapping steps. The typical etching liquor is the acid mixture comprising nitric acid, acetic acid and hydrofluoric acid. At present, the waste acid is treated by a neutralization method with a high alkali cost and balky solid residue. A solvent extraction method is applicable to separate and recover each acid. Acetic acid is first separated from the waste liquor using 2-ethlyhexyl alcohols as an extractant. Then, nitric acid is recovered using TBP(Tri-butyl phosphate) as an extractant. Finally hydrofluoric acid is separated with the TBP solvent extraction. The expected recovered acids in this process are 2㏖/l acetic acid, 6㏖/1 nitric acid and 6㏖/l hydrofluoric acid. The yields of this process are almost 100% for acetic acid and nitric acid. On the other hand, it is important to recover and reuse the metal values contained in various industrial wastes in a viewpoint of environmental preservation. Most of industrial products are made through the processes to separate impurities in raw materials, solid and liquid wastes being necessarily discharged as industrial wastes. Chemical methods such as solvent extraction, ion exchange and membrane, and physical methods such as heavy media separation, magnetic separation and electrostatic separation are considered as the methods for separation and recovery of the metal values from the wastes. Some examples of the application of solvent extraction to the treatment of wastes such as Ni-Co alloy scrap, Sm-Co alloy scrap, fly ash and flue dust, and liquid wastes such as plating solution, the rinse solution, etching solution and pickling solution are introduced.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.439-444
• /
• 1997

In order to investigate organic association of fallout cesium, strontium and plutonium in the soil, soil samples influenced by fallout from nuclear weapon testings were treated with alkali (0.1 M-sodium hydroxide solution) to extract organic acids. After extraction, the resultant three fractions (sedimentary residue, humic and fulvic acid fractions) were subjected to the r-ray spectrometric analysis for $^{137}$ Cs, and radiochemical analysis for gosr and $^{239,240}$Pu. Alkali extraction experiments showed that a lot of $^{ 239,240}$Pu was extracted to organic acids from the soil samples, whereas most of $^{137}$ Cs and $^{90}$ Sr remained in residual fraction. Less than 10% of the total $^{137}$ Cs and $^{90}$ Sr was found in the organic fraction. The concentrations of $^{137}$ Cs and $^{90}$ Sr associated with humic fractions were higher than those with the corresponding fulvic fractions. It was found that more than 40% of the total $^{239,240}$Pu was associated with the organic fraction of soils. In contrast with $^{137}$ Cs and $^{90}$ Sr, $^{239,240}$Pu associated with vulvic fractions was much higher than in humic fractions.