• Korean Journal of Food Science and Technology
• /
• v.33 no.5
• /
• pp.589-595
• /
• 2001

Effect of anti-microbial agents, such as alcohol, garlic, chitosan, K-sorbate, or mustard, or pasteurization on the quality of traditional kochujang was investigated during storage at $30^{\circ}C$ for 24 weeks. Water activities of kochujang decreased after 12 weeks of storage. Consistency increased during storage and highest consistency of kochujang was obtained by the addition of mustard or garlic. Hunter a- and b-values decreased linearly as storage time passed. The degree of increase in total color difference$({\Delta}E)$ of alcohol added group was the highest among the tested anti-microbial agents. Gas was rapidly produced in the control and chitosan added group of kochujang. Capsanthin content decreased more rapidly in the group of alcohol, garlic or mustard added kochujang than the other group. Viable cell counts of yeast and aerobic bacteria in kochujang increased up to 12 weeks of storage, and then decreased slowly. The number of yeast was low in K-sorbate or alcohol added group. Activity of ${\alpha}-amylase$ decreased during storage, but that of ${\beta}-amylase$ increased in alcohol, garlic, K-sorbate added or pasteurized kochujang. Protease activities did not show any remarkable differences in the groups of tested during storage.

• Journal of the Korean Institute of Gas
• /
• v.18 no.2
• /
• pp.48-54
• /
• 2014

A unique optical waveguide structure is proposed to enhance the optical characteristics of alcohol screening sensors. This structure is then simulated. The structure consists of two elliptical waveguides that have a common focus to one side and has an IR source and detector at each of the other focal points of the ellipses. When the angle between the two elliptical waveguides is increased from 30 degrees to 90 degrees, the maximum level of irradiance is greatly decreased, falling from $2.23{\times}10^6 W/m^2$ to $5.74{\times}10^5W/m^2$. However, the diameter of the incident rays is at a minimum of 1.86mm and the total incident flux is less than 10% lower when compared to the structure at $90^{\circ}$. It can be seen from the simulation results that this structure might enhance the sensitivity of an optical gas sensor which has a large absorption wavelength.

• Analytical Science and Technology
• /
• v.12 no.5
• /
• pp.408-414
• /
• 1999

A selective and sensitive method for the derivatization of total homocysteine (Hcy) and the related compounds in plasma by gas chromatograph (GC)-electron capture detector (ECD) has been developed. To determine total homocysteine, cysteine (Cys), and methionine (Met) in human plasma using GC-ECD, analytes were reduced and converted into their N(O,S)-ethylearbonyl pentafluoropropyl (PFP) ester by derivatization with ethyl chloroformate and pentafluoropropyl alcohol (PFP-OH) in plasma. The best derivatizing agent N(O,S)-ethyl carbonyl PFP ester, was chosen by comparing the sensitivity of derivatized analysis in GC-ECD. The derivatized analytes in plasma were extracted by chloroform, and subsequently back-extracted with hexane and analyzed by GC-ECD. The calibration carves ($R^2$ > 0.990) were linear over the range $5-50{\mu}mol/L$ of Hcy and Met, $40-400{\mu}mol/L$ of Cys spiked in plasma. The detection limit observed by the established method was below $0.5{\mu}mol/L$. This method is highly sensitive and specific in the analysis of Hcy, Cys, and Met. Therefore, we suggest that this method is appropriate in the analysis of trace concentration of Hcy, Cys, and Met in biological fluids.

• The Journal of Korean Medicine
• /
• v.25 no.4
• /
• pp.121-128
• /
• 2004

Objective : The aim of this work is to investigate the antibacterial activity of the essential oil obtained from Artemisia capillaris (A. capillaris), as the development of microbial resistance to antibiotics make it necessary to constantly look for new and active compounds effective against pathogenic bacteria. Methods : The crushed materials of A. capillaris (1 kg) were subjected to steam distillation for 3 h, using a modified Clevenger type apparatus in order to obtain essential oil. Diethyl ether was the extracting solvent kept at 25°.... The essential oil was analyzed by gas chromatography (GC) and gas chromatography/mass spectrometry (GC/MS). The essential oil and the composition were tested for antimicrobial activities against 15 different genera of oral bacteria. Results and Conclusion : The components of the essential oil identified were: β-pinene (9.36%), camphor (3.32%), 1,8­cineole (4.38%), artemisia alcohol (3.32%), β-caryophyllene (11.08%), γ-cadinene (4.23%), and capillene (32.74%). The essential oil of A. capillaris exhibited considerable inhibitory effects against all oral bacteria tested, while their major components demonstrated various degrees of growth inhibition.

• Analytical Science and Technology
• /
• v.6 no.3
• /
• pp.335-343
• /
• 1993

The structure of cerebrosides from soybean embryo was determined using fast atom bombardment mass spectrometer (FAB-MS), gas chromatography mass spectrometer (GC-MS) and TLC. The components of cerebroside were determined by GC-MS after acid hydrolysis. The molecular weight distribution of cerebroside was measured by positive mode FAB-MS with LiOH saturated 3-nitrobenzylalcohol(3-NBA) matrix. Structures of individual components of complex mixtures can be determined easily by this process. The major constituent of soybean extracted cerebroside was determined as the glucoside of N-2'-hydroxypalmitoyl-sphingadienine.

• Journal of the Korean Society of Visualization
• /
• v.10 no.3
• /
• pp.21-24
• /
• 2012

Although the motion of the three-phase contact line on a solid substrate has been extensively studied thus far, the understanding of the dynamics of the contact line of liquid/liquid/gas phases is far from complete. Here we deposit a drop of isopropyl alcohol (IPA) on water and HFE-7100 whose free surfaces are exposed to air to observe the flow field around the contact line. By combining the shadowgraph and high-speed imaging techniques, we find that vortices are spontaneously generated at the contact line, which grow in size with time. The flow is attributed to the Marangoni stress that pulls a liquid of lower-surface tension toward a liquid surface having a higher surface tension. However, it is not still clear why the entrained lower-surface-tension liquid should whirl rapidly beneath the contact line. We also visualize the flow by the particle image velocimetry (PIV) to find out that the rotational velocity reaches the order of 1 mm/s near the free surface.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.2
• /
• pp.377-382
• /
• 2014

Micro-/macroporous carbons (MMCs) were prepared using a hollow mesoporous silica capsule (HMSC) as a sacrificial hard template. The carbonization process after the infiltration of furfuryl alcohol into the template-free HMSC material afforded MMC materials in high yield. The hard template HMSC could be removed by HF etching without deteriorating the structure of MMC. The MMC materials were fully characterized by SEM, TEM, PXRD, XPS, and Raman spectroscopy. The replication processes were so successful that MMCs exhibited a hollow capsular structure with multimodal microporosity. Detailed textural properties of MMC materials were investigated by volumetric $N_2$ adsorption-desorption analysis at 77 K. To explore the gas sorption abilities of MMCs for other gases, $H_2$ and $CO_2$ sorption analyses were also performed at various temperatures. The multimodal MMC materials were found to be good sorbents for both $H_2$ and $CO_2$ at low pressure.

• Journal of Sensor Science and Technology
• /
• v.28 no.1
• /
• pp.23-29
• /
• 2019

A copper tetracumylphenoxy phthalocyanine (CuPccp) thin film was formed on an organic insulator film by Langmuir-Blodgett (LB) deposition for gas sensor fabrication. To increase the reproducibility of film transfer, stearyl alcohol was used as a transfer promoter. The structural properties of the CuPccp layers were optically monitored through attenuated total reflection and polarization-modulated ellipsometry techniques. The average thickness of a single layer of the CuPccp LB film was measured to be 2.5 nm. Despite the role of the transfer promoter, the stability of the layer transfer was not sufficient to ensure homogeneity of the LB film. This was probably due to the presence of aggregates in the molecular structure of the CuPccp LB film. Nevertheless, copper phthalocyanine polymorphism can be greatly suppressed by the LB arrangement, which appears to contribute to the improvement of electrical conductivity. The p-type semiconductor characteristics were confirmed by Hall measurements from the CuPccp LB films.

• Proceedings of the PSK Conference
• /
• 2002.10a
• /
• pp.281.1-281.1
• /
• 2002

Psoralen(7H-Furo［3.2-g］ ［1］benzopyran-7-one) and angelicin(2-Oxo-[2H]- furo[2.3-h]-1-benzopyran) are angular furocoumarin with diverse photobiological effects. They are major components of Psoralea corylifolia L.(破古紙). Psoralea corylifolia L. is used for a tonic and nursing one's energy. It can be also used for loss of virility. vitiligo. a skin disease, etc.. But a well known and often appreciated side effects f psoralens is the hyperpigmentation caused by this treatment. A women who used the herbal drug-mixed-medicine named'sobaeksu' to treat her vitiligo made a complaint against the orinetal medical doctor. She complained that her skin got burned to 2nd degree by the liquid. 'sobaeksu' through a medical celtficate. So we analyzed the components of that liquid with gas chromatography and gas chromatography/mass spectometry. It has 57.3% ethyl alcohol and two kinds of psoralens. Psoralens were psoralen and angelicin and each one of their contained quantity was 0.128mg/ml and 0.123mg/ml.

• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.1
• /
• pp.84-96
• /
• 2007

We performed the experiments to manufacture the hydrophobic $200cells/in^2$-zeolite honeycomb using HY-type zeolite of Si/Al ratio of 80 for separating and removing the VOCs emitted from small and medium size-plants by adsorption and to determine the drying method for the honeycomb at $105^{\circ}C$ without cracking, then measured performances of the honeycomb to adsorb the benzene, o-xylene, and MEK and to desorb the benzene and MEK saturated on the honeycomb by the nitrogen gas as the desorption gas. As a results, the good honeycomb was formed and the honeycomb was not cracked when the mixing ratio of the zeolite to bentonite to methyl cellulose to polyvinyl alcohol to glycerine to water is 100 : 8.73 : 2.18 : 4.19 : 1.38 : 126 and dried the honeycomb at $105^{\circ}C$ for 24 hours in the drying oven. The shape of the dried honeycomb was not changed after calcination, and the compressive strengths of the honeycomb after drying and calcination were 6.7 and $0.69kg/cm^2$, respectively. The adsorption efficiencies of the honeycomb for benzene, o-xylene, and MEK were $92{\sim}96%$ at the room temperature. The desorption efficiency at $180^{\circ}C$ was higher than that at $150^{\circ}C\;by\;1.5{\sim}13.8%$ depending on the flow rate of the nitrogen gas, and it was found that desorption efficiency is higher than 85% at $180^{\circ}C$ and 1.0L/min of the nitrogen gas. At $180^{\circ}C$ and 0.2 L/min, the concentration of the benzene and MEK in the used desorption gas are higher than 40,000 and 50,000ppm, respectively, so it be used as the fuel for preheating the desorption gas fed into the column in desorption cycle.