• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.7
• /
• pp.996-1002
• /
• 2014

An experiment was conducted to evaluate the effects of dietary alpha-lipoic acid (LA) and acetyl-L-carnitine (ALC) on growth performance, carcass characteristics and meat quality in Arbor Acres broilers. A total of 486 1-d-old male Arbor Acres broilers were randomly allocated to 9 dietary treatments, 9 treatments were group A (0 mg/kg LA and 0 mg/kg ALC), group B (50 mg/kg LA and 0 mg/kg ALC), group C (100 mg/kg LA and 0 mg/kg ALC), group D (0 mg/kg LA and 50 mg/kg ALC), group E (50 mg/kg LA and 50 mg/kg ALC), group F (100 mg/kg LA and 50 mg/kg ALC), group G (0 mg/kg LA and 100 mg/kg ALC), group H (50 mg/kg LA and 100 mg/kg ALC), group I (100 mg/kg LA and 100 mg/kg ALC). Birds were slaughtered at 42 days old. Average daily gain (ADG), average feed intake (AFI), feed conversion rate (FCR), eviscerated rate, breast muscle percentage, thigh muscle percentage, abdominal fat percentage, liver weight, muscle color ($L^*$ value, $a^*$ value, $b^*$ value), pH values at 45 min and 24 h postmortem were measured. Results showed that there existed an interaction between LA and ALC in growth performance of broilers, carcass traits and meat quality. The overall result is that high level of LA and ALC led to lower AFI, ADG (p<0.01), lower abdominal fat percentage, liver weight (p<0.01), lower $L^*$ value, $a^*$ value, and $b^*$ value of breast muscle, $L^*$ value of thigh muscle (p<0.05), and higher FCR (p<0.01), eviscerated rate (p<0.01), breast muscle percentage, thigh muscle percentage (p<0.05), $a^*$ value, pH 45 min and pH 24 h of thigh muscle (p<0.01). These results suggested that dietary LA and ALC contributed to the improvement of meat quality in broilers.

• Journal of Practical Engineering Education
• /
• v.14 no.2
• /
• pp.295-303
• /
• 2022

This study compares two cases in which flipped learning is applied in the active learning classroom (ALC) and fixed classroom of advanced engineering education. To this end, the difference in pre-learning, academic achievement, and class satisfaction between ALC and fixed classroom flipped learning were compared. The results revealed that students in ALC flipped learning watched more video lectures for pre-learning than those in the fixed classroom flipped learning and achieved higher scores on final tests, though they obtained lower points on midterm exam. In addition, examination of class satisfaction with questions about class factors, instructor factors, and overall satisfaction revealed that ALC flipped learning showed higher satisfaction in all factors than the fixed classroom flipped learning. This case study suggests that the ALC environment, a learning space built to facilitate learner-centered activities, is more effective for flipped learning that requires active interaction in the classroom.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.12 no.3
• /
• pp.59-66
• /
• 2012

Autoclaved Lightweight Concrete(ALC) features such as a high performance insulation, the fire resistance, the advantage of easy handing construction, and lightweight panels applied the curtain wall system. ALC materials are certified as non-toxic environmental and eco-friendly productions. But ALC external panels mixed with blast furnace slag pounder and silica fume have to be coated with a stucco compound or plaster because of resisting the ambient environment. This study is that mixing tests to evaluate a performance analysis of exterior paints to be make-up pigments(organic or inorganic) coated with panel surface. Testing compared by KS F 2476; flow test, KS F 2426; compression strength test, KS F 2762; bond strength test. In results, the case of the inorganic binder, ratio of alumina cement : anhydrite is 90:10 to 80:20 at the highest level of intensity. In the case of the organic binder, adhesive strength rating at surface of ALC, the pullout strength is below 0.5 $N/mm^2$ but the normal concrete is over 2.0$N/mm^2$. A contents ratio of EVA resin is more than 3% and then bond strength is effectively.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.2 no.1
• /
• pp.8-14
• /
• 2011

This study aims at grasping the structural performances of primary anchor assemblage through a nonlinear finite element analysis. Primary anchor unit may be used as one of the connection devices between ALC panel curtain-wall and RC slab or main frame of a building. From the analytical results structural characteristics such as yield strength, initial stiffness and maximum strength are obtained and fully discussed.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.1
• /
• pp.33-39
• /
• 2020

Lightweight geopolymers were fabricated by using fused slag from integrated gasification combined cycle as a law material and Si sludge from silicon wafer process as a bloating material for the purpose of replacing autoclaved lightweight concrete (ALC). Density and compressive strength of geopolymers were measured and compared with the properties of ALC according to the variation of mol concentration of alkaline activator, W/S ratio, addition of fibers, and addition of polystyrene and the possibility of replacing ALC panel was estimated through the comparisons. Although the geopolymer satisfying the standard of ALC panel was not made by controlling mol concentration and W/S ratio, addition of inserts such as fibers and polystyrene insert was tried to overcome the obstacle of enhancing properties. Geopolymers cannot satisfying the standard of ALC panel by adding carbon or glass fibers; however, adding fibers can be suggested as one of the methods enhancing compressive strength because the compressive strength of the specimen containing 0.3 wt.% glass fibers was increased by 3 times. The maximum addition of polystyrene insert was turned out to be 50 vol.% and the properties of geopolymers varied by the method of insertion. When using single polystyrene insert, compressive strength was 17.8 MPa and density was 0.996 g/㎤ which were similar values to the standard of ALC panel. If the difficulties of reproductivity of production and insertion method of inserts were overcome through the future research, the geopolymers containing polystyrene inserts could possibly replace ALC panel.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.4
• /
• pp.89-94
• /
• 2012

ALC was fabricated using cement, lime and quartzite by hydrothermal reaction. The kind of quartzite was reviewed for ALC properties and returned slurry was recycled in this study. Munkyung and Kumpyung quartzite was used and quartzite powder was experimented. The major mineral phase of Munkyung quartzite was quartz and muscovite crystal but that of Kumpyung was quartz. It was certain that crystallinity of Kumpyung quartzite was superior to Munkyung quartzite. Compressive strength and A-number of ALC with Kumpyung quartzite was higher than that of ALC with Munkyung quartzite under similar specific gravity. These results was resulted from major mineral phase, crystallinity and minor components of quartzite.

• Korean Journal of Environmental Agriculture
• /
• v.17 no.1
• /
• pp.54-58
• /
• 1998

This experiment was conducted to find out the effects of fermented compost using cattle manure and Autoclaved Lightweight Concrete(ALC) waste and duck raising in rice growing paddy fields on growth and quality of rice. By application of fermented compost of cattle manure incoporated ALC waste with amount of 2,000kg/10a, rice yield was reduced 2.9%, and 4.1% in 1,000kg/10a of compost with raising ducks plots as compared with application of standard level of chemical fertilizer. The ratio of head rice was slightly high in plots of compost application and white-belly kemeled rice was reduced by application of $1,500{\sim}2000kg/10a$ compost. The ratio of Mg/K was the highest in application of 1,000kg compost with raising duck. Efficiency of weed control by raising duck with free hexbiades was sufficient and their effects showed no difference between raising duck plots and herbidde plot.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.367-368
• /
• 2009

High-rise building in modern society is becoming increasingly necessary to reduce the weight of the building. Accordingly, increased use of lightweight bubble concrete is a trend Porous ceramics (ALC) is the most common, lightweight bubble concrete. And it is by lightweight blocks the same used as building materials. This research is related to the physical characteristics of ALC controlled by particle size and contents of raw materials.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.12-13
• /
• 2019

The bearing capacity of the wall against the eccentric load when the washbasin was attached on the ALC block wall was tested. Test methods are BS EN 14688 and BS 5234-2. Tests in accordance with BS EN 14688 showed that the holding capacity of steel was much stronger and more stable when HA-II (chemical anchor) was used than when the washbasin was fixed using HA-I (plastic anchor). As an experimental result according to the Annex K of BS 5234-2, the bearing capacity of ALC block wall corresponded to the "stage in which the force works(performance grade) 1,500N" for all of the cases where a washbasin is fixed using two types of the wall's dedicated anchors(HA-I and HA-II).

• Journal of Chest Surgery
• /
• v.56 no.3
• /
• pp.179-185
• /
• 2023

Background: Assessments of air leaks are usually performed subjectively, precluding the use of air leaks as an evaluation factor. We aimed to identify objective parameters as predictive factors for prolonged air leak (PAL) and air leak cessation (ALC) from air flow data produced by a digital drainage system. Methods: Flow data records of 352 patients who underwent lung lobectomy were reviewed, and flow data at designated intervals (1, 2, and 3 hours postoperatively [POH] and 3 times a day thereafter [06:00, 13:00, 19:00]) were extracted. ALC was defined by flow less than 20 mL/min over 12 hours, and PAL was defined as ALC after 5 days. Cumulative incidence curves were obtained using Kaplan-Meier estimates of time to ALC. Cox regression analysis was performed to determine the effects of variables on the rate of ALC. Results: The incidence of PAL was 18.2% (64/352). Receiver operating characteristic curve analysis showed cut-off values of 180 mL/min for the flow at 3 POH and 73.3 mL/min for the flow on postoperative day 1; the sensitivity and specificity of these values were 88.9% and 82.5%, respectively. The rates of ALC by Kaplan-Meier analysis were 56.8% at 48 POH and 65.6% at 72 POH. Multivariate Cox regression analysis revealed that the flow at 3 POH (≤80 mL/min), operation time (≤220 minutes), and right middle lobectomy independently predicted ALC. Conclusion: Air flow measured by a digital drainage system is a useful predictor of PAL and ALC and may help optimize the hospital course.