• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.3
• /
• pp.70-76
• /
• 2012

For Analysis and evaluation of ALC carbonation, ALC with various specific gravity was fabricated and silicate and siloxane were used for spraying on ALC surface. Silicon oil of water repellent was added to ALC slurry. ALC carbonation related with specific gravity and carbonation degree was decreased with specific gravity. It was guessed that permeation of $CO_2$ gas reduced depend on compact structure of ALC. ALC which sprayed silicate and siloxane represented more excellent carbonation resistance than Ref. ALC. ALC added silicon oil represented most excellent carbonation resistance.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2006.04a
• /
• pp.402-406
• /
• 2006

The physical and chemical characteristics of ALC were analyzed and showed 2.2 of specific gravity and 9.05 of pH. The results of leaching tests with standard method for soil and waste indicated heavy metals(Cu, Cd, Pb, $Cr^{6+}$) were under maximum concentration level. The anaerobic digestion sludge was attached in the surface of ALC within 90 hours. As the results of batch test, pH of the ALC and Bio-ALC were decreased from initial pH of ALC to 8.7 and 7.8 respectively Also, the concentration of heavy metals was rapidly eliminated in the solution with the batch test. The result of column experiment indicates that the removal efficiency of ALC was showed 66% of T-P, 60% of T-N, and 67% of CODcr. Also, removal efficiency of Bio-ALC was slightly higher than that of ALC in T-N (64%) and CODcr (74%).

• Journal of the Korean Ceramic Society
• /
• v.48 no.6
• /
• pp.595-599
• /
• 2011

ALC(Autoclaved Lightweight Concrete) is produced using quartz sand, lime and cement and water. And aluminum powder is used for blowing agent. ALC is manufactured by autoclave chamber under high-temperature and high-pressure. Generally, ALC is 1/4 levels lighter than concrete and mortar, because it has a lot of pores. So density of ALC is about 0.45~0.65 g/$cm^3$. But, ALC has a weakness, typically low strength, with its porous structure. So, it is necessary to excellent strength properties for extensive apply of ALC materials in high porosity. In this study, melamine resin was used to improve the strength characteristics of ALC materials. We performed compressive and bending strength measurements. Compressive strength of ALC with 2% melamine resin increased 26.88% than 'melamine-free' ALC. Also we performed functionality evaluation such as thermal conductivity, sound absorption, and flame-resistance.

• Journal of Life Science
• /
• v.16 no.7 s.80
• /
• pp.1112-1118
• /
• 2006

Bordetella bronchiseptica, the agent of swine atrophic rhinitis and kennel cough in dogs, is a mucosal pathogen and produces the hydroxamate type alcaligin siderophore under iron-limited conditions. Genes involved in alcaligin siderophore biosynthesis are contained in an alcABCDE operon. In order to provide direct evidence for the role of AlcA in alcaligin biosynthesis, we needed a B. bronchiseptica mutant carrying alcA gene deletion. A 0.6 kb alcA 5'-flanking and 0.7kb 3'-flanking DNA fragments were PCR amplified with the use of pCP1.11 as a template DNA. The 5'-and 3'-flanking DNA fragments were joined in a suicide plasmid, resulting in a recombinant suicide plasmid pDM1. After introduction of pDM1 into B. bronchiseptica by conjugation, the allelic exchange technique was performed and a B. bronchiseptica alcA deletion mutant, named B. bronchiseptica H1, was obtained. The mutant strain produced reduced amount of siderophore as expected. When a plasmid containing complete alcA gene was transformed back into the mutant, the complemented mutant recovered ability of siderophore production. These results indicated that AlcA is one of essential components for the alcaligin siderophore biosynthesis. The mutant strains obtained in this study will be used in the further studies for the biochemical function of AlcA.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.67-70
• /
• 1992

1930년 스웨덴에서 개발에 성공, 네덜란드에서 더욱 발전시킨 ALC(Autoclaved Light-weignt Concrete의 약칭) 는 가볍고, 견고하고, 그리고 시공이 간편한 경제적인 요건들을 충족시키는 건축자재로 세계적으로 널리 사용되고 있으며 , 국내에서는 불과 수년 전부터 연구 개발되고 있는 실정이다. ALC 란 시멘트와 규사, 생석회등 무기질 원료를 고온,고압으로 증기 양생시킨 경량의 기포 콘크리트 제품을 통칭한 것이다. ALC공정은 bulk ALC를 생산하는 batch공정과 이 bulk ALC에 대한 처리 공정으로 크게 나눌 수가 있으며 여기에서는 bulk ALC 처리 공정을 side shield treatment, anti-corrosion treatment, curing grate transferer, cutting station, curing car transportation, autoclave traveling platform, 및 packing 의 공정으로 세분하여 각 공정개요 소개 및 PLC(Programmable Logic Controller의 약칭)를 이용한 제어 system에 대하여 설명하고자 한다.

• Korean Journal of Soil Science and Fertilizer
• /
• v.31 no.4
• /
• pp.368-372
• /
• 1998

A field assay was conducted to study whether the by-product of Autoclaved Lightweight Concrete(ALC) could be used as a silicate fertilizer for Korean Zoysiagrass. ALC application rates (0, 2.0, 4.0, 6.0 and $8.0Mg\;ha^{-1}$) were investigated for their effects on growth status, mineral nutrient concentrations, yield of fresh and dry matter of lawn grass and soil properties after experiments. The number of stolon and length of stolon at 180 day after Zoysiagrass transplanting were increased in the treatemnt of $2.0{\sim}6.0Mg\;ha^{-1}$ of ALC application, but those of $8.0Mg\;ha^{-1}$ of ALC plot were deceased with excess of ALC. The fresh weight and dry matter at harvesting time of lawn grass treated with $6.0Mg\;ha^{-1}$ of ALC was heavier than those of other ALC plots. There were statistically significant between the number of stolon and length of stolon remarkably. Mineral nutrient contents such as Si and Ca in Zoysiagrass were increased by higher ALC application, while T-N, available P and K were no difference with application lavel of ALC. Soil pH and Si contents in soil after experiment were increased by ALC application remarkably.

• Archives of Pharmacal Research
• /
• v.27 no.6
• /
• pp.676-681
• /
• 2004

Acetyl-L-camitine (ALC), a naturally occurring endogenous compound, has been shown to improve the cognitive performance of patients with senile dementia Alzheimer＇s type, and to be involved in cholinergic neurotransmission. Because ALC is an endogenous compound, valida-tion of the analytical methods of ALC in the biological fluids is very important and difficult. This study was presented validation and correction for plasma ALC concentrations and pharmacok-inetics after oral administration of ALC to human volunteers. ALC concentrations in human plasma were corrected by subtracting the concentration of blank plasma from each sample. Precision and accuracy (bias %) for uncorrected ALC concentrations were below 2.6 and 6.5% for intra-days, and 4.0 and 9.4% for inter-days, respectively. Precision and accuracy (bias %)for corrected ALC concentrations were below 10.9 and 6.0% for intra-days, and 10.5 and 16.9% for inter-days, respectively. Quantitation limit was $0.1{\;}\mu\textrm{g}／mL$. After oral administration of a 500 mg ALC tablet to 8 healthy volunteers, the principle pharmacokinetic parameters were 4.2 h of the half-life$ (t_{1/2},{\beta})$, the area under the curve $(AUC_{0{\rightarrow}8){\;}of{\;}9.88{\;}\mu\textrm{g}{\cdot}h/mL$, and 3.1 h of the time ($T_{max}$) to reach $C_{max}$. This study first describes the pharmacokinetic study after oral admin-istration of a single dose of ALC in human volunteers.

• Journal of the Korean Ceramic Society
• /
• v.49 no.6
• /
• pp.535-541
• /
• 2012

ALC was fabricated using cement, lime, quartzite and a foaming agent via a hydrothermal reaction. ALC has various hydrothermal reaction products and many pores. The properties and colors of ALC surfaces were changed by various factors during ALC fabrication process. This study tested various staying times to analyze these phenomena. It was found that the staying time of green body influenced the properties of hydrothermal products and color of ALC surface. The longer staying time of green body, the lower tobermorite content and cumulative loss weight. An increase in holding time changed color and decreased whiteness of ALC surface. The relationship between whiteness and cumulative loss weight was very high (Coefficient, r = 0.95). It was surmised that tobermorite content was an important factor for enhancement of whiteness However, ettringite and quartzite did not contribute to whiteness.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.11a
• /
• pp.79-82
• /
• 2007

Recently, the use of ALC has became increasingly popular. ALC is a unique building material. Because of its cellular nature, it is lightweight, self-insulating, sound and fireproof, as well as insect and mold resistant. Furthermore, ALC is free of VOCs and various fibers associated with wood and glass wool construction. However, ALC have high water absorption, low compressive strength and popout the origin of the low surface strength in its properties. These properties make troubles under construction such as cracking and popout. Thus, this study is to improve the fundamental strength by controls of increasing of admixtures, and grain size. Admixtures make use of metakaolin, silica fume, sodium silicate and sodium hydroxide. From the test result, the ALC using admixture have a good fundamental properties compared with plain specimen. Compressive strength, specific strength and abrasion's ratio were improved depending on increasing admixtures ratio's, and grain size.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.1
• /
• pp.33-39
• /
• 2020

Lightweight geopolymers were fabricated by using fused slag from integrated gasification combined cycle as a law material and Si sludge from silicon wafer process as a bloating material for the purpose of replacing autoclaved lightweight concrete (ALC). Density and compressive strength of geopolymers were measured and compared with the properties of ALC according to the variation of mol concentration of alkaline activator, W/S ratio, addition of fibers, and addition of polystyrene and the possibility of replacing ALC panel was estimated through the comparisons. Although the geopolymer satisfying the standard of ALC panel was not made by controlling mol concentration and W/S ratio, addition of inserts such as fibers and polystyrene insert was tried to overcome the obstacle of enhancing properties. Geopolymers cannot satisfying the standard of ALC panel by adding carbon or glass fibers; however, adding fibers can be suggested as one of the methods enhancing compressive strength because the compressive strength of the specimen containing 0.3 wt.% glass fibers was increased by 3 times. The maximum addition of polystyrene insert was turned out to be 50 vol.% and the properties of geopolymers varied by the method of insertion. When using single polystyrene insert, compressive strength was 17.8 MPa and density was 0.996 g/㎤ which were similar values to the standard of ALC panel. If the difficulties of reproductivity of production and insertion method of inserts were overcome through the future research, the geopolymers containing polystyrene inserts could possibly replace ALC panel.