• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.3
• /
• pp.288-294
• /
• 2005

This study was conducted to evaluate the grit removal efficiency of tornado block-type vortex grit separator. Vortex grit separator was manufactured for this study, and it was characterized by the impeller and tornado block installed in separator. Impeller was installed to increase water velocity in the separator and tornado block was installed to increase the grit lifting efficiency. Pilot study was also conducted in A sewage treatment plant (STP) in Gyeonggi province from November 2003 to May 2004 (64 days). Major findings are as follows. 1. Impeller was proven to increase water velocity in the grit separator, especially in low flow rate. This influence will increase separation ratio of organics from grits, preventing those organics from sedimentation. 2. Sand (with 0.2~0.3mm size) removal efficiency was over 98 % and 96 %, at the flow rate of $500m^3/day$ and $750m^3/day$ under the condition that impeller rotation velocity kept at 15 rpm. Originally that grit separator was designed to have the capacity of $500m^3/day$. $750m^3/day$ was tried to investigate the performance of this type of grit separator under overload condition. Stable grit removal was still available to the extent of 150% of designed capacity. 3. It took less than 3 minutes for the grit separator to completely lift out 3 kgs of 0.2-0.3 mm sized, settled sand at the bottom to 2,060 mm high above water surface. But it showed the tendency to spend a little more time on lifting the grit as the grit size and the vertical height of the lift increased. 4. During experimental duration in A STP, it was found that the average amount of inlet grit was about 981 g/day (160~1,685 g/day) under $500m^3/day$ of operation condition, but it varied so severely during the experimental duration. After classification of discharged grit according to its size, grit with 0.3-0.42 mm size was found as largest part of output.

• Journal of Plant Biotechnology
• /
• v.29 no.1
• /
• pp.19-23
• /
• 2002

This experiment was conducted to micropropagate bulblets via shoot cluster formation and massproduce normal bulblets from the sections of proliferated shoot clusters in Lilium asiatic hybrid 'Hae Hwa'. The induction of shoot clusters from the culture of bulblet sections was more effective than that of bulb scales on MS medium with 1.0 mg/L BA and 0.5 mg/L IAA. Proliferation of shoot clusters from the formed shoot cluster sections was the most favorable on medium containing 5.0 mg/L BA and 0.5 mg/L IAA. The formation and the growth of bulblets from shoot cluster sections were achieved effectively on medium with 60∼90 g/L sucrose. The leaves derived from shoot clusters grew vigorously but the bulblets from shoot clusters grew very poor in 5L air-lift bioreactor culture. By the addition of 30 mL fresh liquid medium containing doulble strength MS salts, 250 g/L sucrose and 5 g/L activated charcoal after 8 weeks in the shoot cluster culture on MS medium with 5.0 mg/L BA and 0.5 mg/L IAA, the number of bulblets was increased in light condition, but the growth of bulblets was not affected by light. Bulblet production was possible with the bulblet product at 53 to 68 mg in fresh weight by liquid medium addition after the proliferation of shoot cluster.

• KSBB Journal
• /
• v.14 no.5
• /
• pp.585-592
• /
• 1999

This study was aimed to enhance the Fe(II) oxidation rate using immobilized cells of Thiobacillus ferroxidans. For this purpose, a medium for the minimization of jarosite formation was developed first. Secondly, cell immobilization in celite beads was carried out. And then, repeated-batch and continuous operatons of Fe(II) oxidation by using immobilization cells were performed. In a series of flask cultures, three types of media were tested: media with a much lower salt concentration than that of the 9K medium; media which contained different nitrogen sources from that of the 9K medium, that is $(NH_4)_2HPO_4$, $NH_4Cl and HNO$_3$; media which contained $(NH_4)_2HPO_4$ as nitrogen and phosphate source, but without $K_2HPO_4$ as nitrogen and phosphate source in the 9K medium. As a result, the M16 medium which contained 3 g/L of $(NH_4)_2HPO_4$ as nitrogen and phosphate source was found to be the optimal one. It sustained good cell growth allowing no jarosite formation. In the repeated-batch operations, the rate of Fe(II) oxidation gradually increased to reach a maximum value as the batch was repeated. As a result of repeated-batch operations. a maximum Fe(II) oxidation rate was 2.33 g/L . h. In the continuous operations, the iron oxidation rate could be increased to 2.14 g/L .h at a dilution rate of 0.25 $h^{-1}$ which is greater than the maximum specific growth rate (0.12 $h^{-1}$) of the bacteria.