• 환경영향평가
• /
• 제11권2호
• /
• pp.67-77
• /
• 2002

Air traffic increased 12% annually in Korea since 1988 after the Olympics, this rate is two times than the rate of the world average. In order to accommodate fast growing aviation demand, Incheon International Airport is operated at Yongjong Island since March, 2001. The Incheon airport project will continue till 2020. After the final phase in 2020, Incheon International Airport will handle 100 million passengers, 530,000 flights and 7 million tons of cargo annually. In this study, air pollution from aircraft and other sources are calculated and assessed in Incheon International Airport area by EDMS(Emission and Dispersion Modeling System), which is a combined emission and dispersion model for airport. EDMS could also be considered power plant, incinerator and aircraft support equipment such as ground support equipment, aerospace ground equipment, auxiliary power units. And EDMS is recommended as preferred model for air quality assessment of the airport area by U.S. EP A. The result of this study shows that NOx emission from aircraft and support utility is estimated as 27,000 - 35,000 ton/yr and Namdong-Gu area in Incheon city is affected as 30-60 ppb by the NOx emission from these sources in 2020, the final phase of Incheon international airport construction.

• 한국항공운항학회지
• /
• 제13권3호
• /
• pp.73-84
• /
• 2005

Hanseo University's Tae-an Airfield was opened in July, 2005 for aeronautical education such as aircraft flight, air traffic control, avionics, etc., and will play an important part as a base for local economic and industrial developments. On the contrary, the aircraft noise from the airfield will give an impact against the vicinity of the airfield and become a big issue which the airfield authority has to solve. The aim of this study is to analyse the aircraft noise contour in vicinity of the airfield and to make understand the people around the airfield how much the aircraft noise will have an effect on. For the prediction of the aircraft noise in the local area, this study showed the method to assess the aircraft noise in the developed countries for aviation, and the result to compute WECPNL by INM 6.1 after encoding the various data including environmental input data, tract, and profile. The major results of the study can be summarized as follows ; While the area with influence contour of noise from 75 to 80 WECPNL is 0.555$km^2$, the area from 80 to 85 is 0.343$km^2$, and the area with influence contour of noise over 85 WECPNL is 0.163$km^2$. In addition, there are 4 houses in the contour over 85 WECPNL and the inhabitants(10 people) in this area will have effect from the noise. Therefore Tae-an airfeild authority is preparing the noise-prevention method or noise abatement program. Finally, according to the noise contour, it is one of the best way of decreasing the effect of aircraft noise that 33 runway is assigned as calm-wind runway because there is no resident in the area around 15 threshold.

• 대한기계학회논문집A
• /
• 제37권4호
• /
• pp.503-509
• /
• 2013

탄소섬유강화 복합재료는 일반적으로 압축하중과 재료의 면에 수직한 방향의 충격에 매우 취약하다는 단점을 가지고 있다. 특히 항공기의 운항 중 조류와의 충돌이나 정비 중 공구의 낙하로 인한 충격손상은 항공기 구조물의 강도저하의 원인이 된다. 따라서 본 연구에서는 복합재료(CFRP) 시험편에 충격에너지와 충격자 직경을 변화시키면서 충격손상을 가한 후 압축시험을 수행하여 충격후 압축잔류강도를 평가하였으며, 시험 결과를 비교하여 충격에너지에 따른 충격후 압축잔류강도 예측식을 제안하였다.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1994년도 FIFTH WESTERN PACIFIC REGIONAL ACOUSTICS CONFERENCE SEOUL KOREA
• /
• pp.812-816
• /
• 1994

Gardermoen is chosen as the location for a new major airport for the Oslo area, The site is surrounded by various units and camps operated by the Norwegian national defence. A study was carried out to evaluate whether the occurrence of aircraft noise may result in the national defence having to restrict operations in established camps, and in areas where outdoor exercise, training and instruction are beeing carried out.

• Earthquakes and Structures
• /
• 제3권3_4호
• /
• pp.435-455
• /
• 2012

An impact on the ground surface may represent several phenomena, such as a crash of an airplane or an explosion or the passage of a train. In order to analyze and design structures and equipment to resist such a type of shocks, the response spectra for an impact on the ground must be given. We investigated the half-space motions due to impact using the finite element method. We performed extensive parametric analyses to define a suitable finite element model and arrive at displacement time histories and response spectra at varying distances from the impact point. The principal scope of our study has been to derive response spectra which: (a) provide insight and illustrate in detail the half-space response to an impact load, (b) can be readily used for the analysis of structures resting on a ground subjected to an impact and (c) are a new family of results for the impact problem and can serve as reference for future research.

• 항공우주기술
• /
• 제7권2호
• /
• pp.1-10
• /
• 2008

일반적으로 조류충돌 안전성 입증에 대한 규정은 고정익 항공기 중 FAR Part 23급 커뮤터 및 FAR Part 25급 민간항공기 부류의 항공기에 국한되어 적용되고 있다. 이는 상대적으로 낮은 비행속력과 주로 개인용 항공기로의 활용 등의 이유로 조류 충돌에 대한 위험성이 낮게 평가되었기 때문이다. 하지만 최근의 지점 간 운송을 목적으로 하는 Air-Taxi 등의 수요 증가로 인한 소형항공기 운항시간 증가 예측과 급격한 수요의 VLJ(Very Light Jet)등은 FAR Part 23급 Normal, Utility급 항공기의 조류 충돌 안전성에 대한 규정 적용 및 안전성 향상에 대한 필요성을 증가시키고 있다. 본 연구에서는 외연적 유한요소 해석을 이용한 소형항공기 주익에 대한 조류 충돌 안전성 평가와 Crushable Foam을 적용한 안전성 향상방안을 제시하고 있다.

• 한국항공운항학회지
• /
• 제12권3호
• /
• pp.41-63
• /
• 2004

The area covered by product liability in broadest sense is so vast that an attempt to analyse all its impact on the aviation world risk. Every effort has been made to confine our review of subject a closely as possible to its influence on aircraft manufacturers, airlines and passengers, in spite of strong connections with other spheres of commercial. Product Liability in aviation is the liability of aircraft's manufacturer, processor or non-manufacturing seller for injury to the person or property of a buyer or third party caused by a product which has been sold. Here-in a product is aircraft, third party is passengers who suffered damage by defective design, defective construction, inadequate instructions for handling in aircraft. Whenever a product turns out to be defective after it has been sold, there are under Anglo-American law three remedies available against the aircraft's manufacturer (1) liability for negligence (2) breach of warranty (3) strict liability in tort. There are Under continental law Three remedies available against the aircraft's manufacturer (1) liability for defective warranty (2) liability for non-fulfillment of obligation (3) liability in tort. It is worth pointing out here an action for breach of warranty or for defective warranty, for non-fulfillment of obligation is available only to direct purchaser on the basis of his contract with the aircraft's manufacturer, which of course weakness its range and effectiveness. An action for tort offers the advantage of being available also to third parties who have acquired the defective product at a later stage. In tort, obligations are constituted not only by contract, but also by stature and common law. In conclusion, There in no difference in principle of law. In conclusion I would like to make few suggestions regarding the product liability for aircraft's manufacturer. Firstly, current general product liability code does not specify whether government offices(e.g. FAA) inspector conducted the inspection and auditory certificate can qualify as conclusive legal evidence. These need to be clarified. Secondly, because Korea is gaining potential of becoming aircraft's manufacturer through co-manufacturing and subcontracting-manufacturing with the US and independent production, there needs legislation that can harmonize the protection of both aircraft's manufacturers and their injured parties. Since Korea is in primary stage of aviation industry, considerate policy cannot be overlooked for its protection and promotion. Thirdly, because aircraft manufacturers are risking restitution like air-carriers whose scope of restitution have widened to strict and unlimited liability, there needs importation of mandatory liability insurance and national warranty into the product liability for aircraft's manufacturers. Fourthly, there needs domestic legislation of air transportation law that clearly regulates overall legal relationship in air transportation such as carrier & aircraft manufacturer's liability, and aviation insurance.

• 전산구조공학
• /
• 제25권3호
• /
• pp.32-42
• /
• 2012

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2003년도 춘계학술발표대회 요약집
• /
• pp.400-400
• /
• 2003

• 전산구조공학
• /
• 제24권1호
• /
• pp.49-56
• /
• 2011