• 공학교육연구
• /
• 제17권5호
• /
• pp.17-22
• /
• 2014

Unmanned aerial vehicles (UAVs) that have been recently commercialized can largely be divided into fixed-wing aircraft and rotor aircraft by their styles and flight characteristics. Although the fixed-wing aircraft represents higher power efficiency, higher speed, longer flight distance and larger loading weight than the rotor aircraft, they have a disadvantage of requiring a space for take-off and landing. On the other hand, the rotor aircraft can implement vertical take-off and landing (VTOL) and represents various flight modes (hovering, steep bank turns and low-speed flights). But they require both precision take-off control and attitude control. In this study, we used a quad-tilt rotor UAV to combine advantages in both the fixed-wing aircraft and the rotor aircraft. The quad-tilt rotor (QTR) system was designed and constructed by adding a tilt device with a servo motor to a general quad-rotor vehicle.

• 한국항공우주학회지
• /
• 제41권5호
• /
• pp.391-403
• /
• 2013

전기 추진 프로펠러 항공기는 기존의 제트엔진으로부터 나오는 유해한 배기가스로 인한 환경적 우려와 국가 에너지 안보 차원에서 새로운 관심을 받고 있다. 그러나 전통적인 항공기 사이징 방법들은 여러 종류의 에너지원과 동력 시스템을 사용하는 전기 추진 항공기에 바로 적용될 수 없다. 본 연구에서는 일반화된 동력기반 사이징 기법에 기초한 전기 추진 항공기 사이징의 실제 예를 제시하였다. 여기서 일반 항공기는 프로펠러, 고온초전도모터, 수소가 연료로 사용되는 연료전지, 동력 조절 장치로 구성되는 전기 추진시스템에 의해 구동된다. 기술 향상의 영향을 평가하기 위해 전기 구성품들의 두 가지 다른 기술 구성을 가정하여 항공기 사이징을 수행하였고, 전형적인 형태의 기준 항공기와 사이징 결과를 비교하였다.

• Structural Monitoring and Maintenance
• /
• 제1권3호
• /
• pp.293-308
• /
• 2014

In the aeronautical environment, numerous regulatory and communication protocols exist that cover interconnection of on-board equipment inside the aircraft. Developed and implemented by the airlines since the 1960s, these communication systems are reliable, strong, certified and able to contact different sensors distributed throughout the aircraft. However, the scenario is slightly different in the structural health monitoring (SHM) field as the requirements and specifications that a global SHM communication system must fulfill are distinct. The number of SHM sensors installed in the aircraft rises into the thousands, and it is impossible to maintain all of the SHM sensors in operation simultaneously because the overall power consumption would be of thousands of Watts. This design of a new communication system must consider aspects as management of the electrical power supply, topology of the network for thousands of nodes, sampling frequency for SHM analysis, data rates, selected real-time considerations, and total cable weight. The goal of the research presented in this paper is to describe and present a possible integration scheme for the large number of SHM sensors installed on-board an aircraft with low power consumption. This paper presents a new communications system for SHM sensors known as the Bi-Instruction Link Bi-Operator (BILBO).

• Journal of Power Electronics
• /
• 제18권4호
• /
• pp.1255-1267
• /
• 2018

Parasitic parameters have a larger influence on Silicon Carbide (SiC) devices with an increase of the switching frequency. This limits full utilization of the performance advantages of the low switching losses in high frequency applications. By combining a theoretical analysis with a experimental parametric study, a mathematic model considering the parasitic inductance and parasitic capacitance is developed for the basic switching circuit of a SiC MOSFET. The main factors affecting the switching characteristics are explored. Moreover, a fast-switching double pulse test platform is built to measure the individual influences of each parasitic parameters on the switching characteristics. In addition, guidelines are revealed through experimental results. Due to the limits of the practical layout in the high-speed switching circuits of SiC devices, the matching relations are developed and an optimized layout design method for the parasitic inductance is proposed under a constant length of the switching loop. The design criteria are concluded based on the impact of the parasitic parameters. This provides guidelines for layout design considerations of SiC-based high-speed switching circuits.

• 한국의류학회지
• /
• 제32권5호
• /
• pp.681-691
• /
• 2008

Taking into consideration both the inconveniences reported with current working uniform for the aircraft mechanics and the subjects' requirements mentioned in preceded survey, the researchers designed an ergonomic sample garments with improved motional flexibility and comfort. To improve motional flexibility, extra folds were added to the back of the garments to allow for ease of motion of limbs, so that the material would not be drawn up by the motion of the arms. Darts were added to the elbow, hip, the knee. Furthermore, by increasing the length of the waist centerline, the hip region would not be drawn up. For improved comfort, $CoolMax^{(R)}$ was used as lining material for the armpit and back region to discharge swear promptly. Subjects and panels were asked to evaluate the sample garment that followed an ergonomic design and pattern. According to the results, the sample garment was evaluated more highly than the existing working uniform in appearance and motional flexibility. The field tests by three aircraft mechanics working in the Office of Forestry were also demonstrated that the sample garment was advanced in terms of motional flexibility and comfort.

• 항공우주시스템공학회지
• /
• 제9권2호
• /
• pp.19-24
• /
• 2015

Export basic trainer was designed to add armed configuration required by customer. Design configuration of main wing was changed to satisfy changed internal load caused by armed configuration. It was verified that design changed main wing airframe of export basic trainer satisfy the requirement through the structural detail analysis, structural ground test and flight test. This paper presents the durability test procensure and test result for the main wing of export basic trainer.

• Nuclear Engineering and Technology
• /
• 제52권2호
• /
• pp.381-396
• /
• 2020

Investigations of the commercial aircraft impact effect on nuclear island infrastructures have been drawing extensive attention, and this paper aims to perform the safety assessment of Generation III nuclear power plant (NPP) buildings subjected to typical commercial aircrafts crash. At present Part I, finite element (FE) models establishment and validations for both the aircrafts and NPP buildings are performed. (i) Airbus A320 and A380 aircrafts are selected as the representative medium and large commercial aircrafts, and the corresponding fine FE models including the skin, beam, fuel and etc. are established. By comparing the numerically derived impact force time-histories with the existing published literatures, the rationality of aircrafts models is verified. (ii) Fine FE model of the Chinese Zhejiang Sanao NPP buildings is established, including the detailed structures and reinforcing arrangement of both the containment and auxiliary buildings. (iii) By numerically reproducing the existing 1/7.5 scaled aircraft model impact tests on steel plate reinforced concrete (SC) panels and assessing the impact process and velocity time-history of aircraft model, as well as the damage and the maximum deflection of SC panels, the applicability of the existing three concrete constitutive models (i.e., K&C, Winfrith and CSC) are evaluated and the superiority of Winfrith model for SC panels under deformable missile impact is verified. The present work can provide beneficial reference for the integral aircraft crash analyses and structural damage assessment in the following two parts of this paper.

• Nuclear Engineering and Technology
• /
• 제52권2호
• /
• pp.397-416
• /
• 2020

Investigations of the commercial aircraft impact effect on nuclear island infrastructures have been drawing extensive attention, and this paper aims to perform the safety assessment of Generation III nuclear power plant (NPP) buildings subjected to typical commercial aircrafts crash. At present Part II, based on the verified finite element (FE) models of aircrafts Airbus A320 and A380, as well as the NPP containment and auxiliary buildings in Part I of this paper, the whole collision process is reproduced numerically by adopting the coupled missile-target interaction approach with the finite element code LS-DYNA. The impact induced damage of NPP plant under four impact locations of containment (cylinder, air intake, conical roof and PCS water tank) and two impact locations of auxiliary buildings (exterior wall and roof of spent fuel pool room) are evaluated. Furthermore, by considering the inner structures in the containment and raft foundation of NPP, the structural vibration analyses are conducted under two impact locations (middle height of cylinder, main control room in the auxiliary buildings). It indicates that, within the discussed scenarios, NPP structures can withstand the impact of both two aircrafts, while the functionality of internal equipment on higher floors will be affected to some extent under impact induced vibrations, and A380 aircraft will cause more serious structural damage and vibrations than A320 aircraft. The present work can provide helpful references to assess the safety of the structures and inner equipment of NPP plant under commercial aircraft impact.

• 대한조선학회논문집
• /
• 제61권2호
• /
• pp.125-134
• /
• 2024

The Safe Operating Envelope (SOE) combined with Short-Take-Off and Vertical Landing (STOVL) performance is an essential consideration of a light aircraft carrier for design of hull shape with excellent seakeeping performance in terms of naval air operations as well as traditional naval ship missions such as Transit and Patrol (TAP), and Replenishment at Sea (RAS) and so on. A variety of procedures are systematically combined to determine SOE considering rather complicated missions associated with operation of aircraft onboard. The evaluation of take-off and landing safety missions onboard should consider wind effect on deck and severer seakeeping indices and standards compared with conventional naval ships. In order to support take-off and landing missions, various support activities of the crews are required. So, additional evaluation is needed for indicators such as MSI(Motion sickness Index) and MII(Motion Induced Interruptions), which are quantitative indicators of work ability that appear as a result of motion response. In this study, a standard procedure is developed including the seaworthiness performance indicators, standards, and evaluation procedures that should be considered during design of STOVL aircraft carrier. Analysis results are discussed in terns of air-wake on deck as well as seakeeping indices associated with design parameter changes in view of conceptual design of a light aircraft carrier.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.194-197
• /
• 2017

항공기 엔진과 보조동력장치는 안전성에 기반하여 감항성 기준과 인증절차에 따라 반드시 인증을 받도록 규정하고 있다. 항공기 엔진은 형식증명을 통하여 설계와 제작에 대한 적합성을 입증하여야 하며, 보조동력장치의 경우는 기술표준품 표준서에서 요구하고 있는 최소성능표준(Minimum Performance Standards)에 대하여 설계와 생산에 대한 적합성을 입증하여야 한다. 우리나라는 항공기 엔진에 대한 항공기기술기준으로 Part 33을 제정하고 있으나, 보조동력장치에 대한 인증 기준은 고시되지 않은 상태이다. 항공기 엔진과 보조동력장치의 개발과 인증체계 구축은 우리나라 항공 산업을 한단계 향상시킬 수 있는 계기가 될 것이다. 이에 본 논문에서는 항공기 엔진 및 보조동력장치에 대한 인증 현황을 통하여 개선 방안을 제시하고자 한다.