• 접착 및 계면
• /
• 제13권2호
• /
• pp.73-84
• /
• 2012

공기-유리 사이의 계면에서 광학적 정보가 전달되는 메카니즘을 알아보기 위하여, 유리컵을 잡은 손가락 지문(골과 능선)의 선명도에 미치는 불완전 전반사(Frustrated Total Internal Reflection: FTIR)와 수분 효과를 이론과 실험을 통해 조사하였다. 물이 든 컵을 잡은 손가락의 경우, 지문이 아주 선명하였는데 이는 컵 바닥으로부터 출발한 빛이 유리벽에서 전반사(Total Internal Reflection: TIR)된 빛과 지문 능선에서 반사된 빛의 세기가 서로 달라서 나타남을 기하광학, Fresnel 이론, TIR 및 FTIR 현상을 이용하여 밝혀내었다. 또한 공기-유리 경계면에서 지문의 선명도에 미치는 FTIR과 수분 효과를 실험적으로 관측한 결과, 지문이 선명하게 보이는 현상은 FTIR 현상보다는 수분의 효과가 훨씬 더 지배적이라는 사실을 처음으로 규명하였다.

• 한국생산제조학회지
• /
• 제22권6호
• /
• pp.913-920
• /
• 2013

This paper presents an applicable basic design that can configure non-contact levitation table for conveying a large sheet of glass. The suggested air levitation table consists of a series of air chambers with porous pads and fans as the conveyor system. The air supply chambers are arrayed to supply an adequately strong upward airflow for supporting the glass. Levitation is controlled by the size and discharge velocity, of the chamber arrays, as well as the glass supporting height. After pre-evaluation of the glass rigidity and the filer functional performance, a one-way fluid structure interface (FSI) analysis is performed for predicting pressure and deflection working of the 8G glass in the transverse and longitudinal directions, respectively. After comparing calculated levels of flatness of the glass, it determines the chamber array for the linear non-contact conveying motion.

• Macromolecular Research
• /
• 제15권2호
• /
• pp.109-113
• /
• 2007

The surface molecular motion of monodisperse polystyrene (PS) films was examined using scanning vis-coelasticity microscopy (SVM) in conjunction with lateral force microscopy (LFM). The dynamic storage modulus, E', and loss tangent, $tan\delta$, at a PS film surface with number-average molecular weights, $M_n$, smaller than 30 k were found to be smaller and larger than those for the bulk sample, even at room temperature, meaning that the PS surface is in a glass-rubber transition or fully rubbery sate at this temperature when the $M_n$ is small. In order to quantitatively elucidate the dynamics of the molecular motion at the PS surface, SVM and LFM measurements were performed at various temperatures. The glass transition temperature, $T_g$, at the surface was found to be markedly lower than the bulk $T_g$, and this discrepancy between the surface and bulk became larger with decreasing $M_n$. Such an intensive activation of the thermal molecular motion at the PS surfaces can be explained in terms of an excess free volume in the vicinity of the film surface induced by the preferential segregation of the chain end groups.

• 한국표면공학회지
• /
• 제48권6호
• /
• pp.322-328
• /
• 2015

We investigated the diffusion behaviors, electrical properties, microstructures, and composition of In-Ga-Zn-O (IGZO) oxide thin films deposited by radio frequency reactive magnetron sputtering with increasing annealing temperatures. The samples were deposited at room temperature and then annealed at 300, 400, 500, 600 and $700^{\circ}C$ in air ambient for 2 h. According to the results of time-of-flight secondary ion mass spectrometry and X-ray photoelectron spectroscopy, no diffusion of In, Ga, and Zn components were observed at 300, 400, 500, $600^{\circ}C$, but there was a diffusion at $700^{\circ}C$. However, for the sample annealed at $700^{\circ}C$, considerable diffusion occurred. Especially, the concentration of In and Ga components were similar at the IGZO thin film but were decreased near the interface between the IGZO and glass substrate, while the concentration of Zn was decreased at the IGZO thin film and some Zn were partially diffused into the glass substrate. The high-resolution transmission electron microscopy results showed that a phase change at the interface between IGZO film and glass substrate began to occur at $500^{\circ}C$ and an unidentified crystalline phase was observed at the interface between IGZO film and glass substrate due to a rapid change in composition of In, Ga and Zn at $700^{\circ}C$. The best values of electron mobility of $15.5cm^2/V{\cdot}s$ and resistivity of $0.21{\Omega}cm$ were obtained from the sample annealed at $600^{\circ}C$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1292-1294
• /
• 1994

With the contact angle of phase epoxy resin on the inorganic filler(glass plate) surface treated with air plasma, we have studied about the interface between epoxy resin and glass plate as simple model of a glass fiber reinforced composite materials. The contact angle on the inorganic filler surface varied with surface treatment conditions. The contact angle significantly depends on plasma treating time and environment temperature of the oven.

• 센서학회지
• /
• 제30권6호
• /
• pp.415-419
• /
• 2021

We developed a highly accurate, yet inexpensive, refractive index (RI)-based soil moisture sensor. To detect the RI, a light guide was set with a light-emitting diode and photodiode. When the air fills the space between the soil particles, most of the incident light is reflected at the interface between the waveguide and the air because of the large RI difference. As the moisture of the soil increases, the macroscopic soil RI increases. This allows incident light to pass through the interface. The intensity of the light reaching the photodiode was simulated according to the change in the soil RI. Using the simulation results, we designed and manufactured a curved glass waveguide. We evaluated the performance of the RI-based soil sensor by comparing it with a commercially available, high-cost and high-performance time-domain reflectometer (TDR). Our sensor was 96% accurate, surpassing the costly TDR sensor.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제11C권3호
• /
• pp.49-52
• /
• 2001

The derivatives of spironaphthooxazine gause photoisomerization when they are illuminate with UV light. We investigated the photoisomerization of spironaphthooxazine derivatives for holographic memory. Langmuir-Blodgett (LB) films contain amphiphile spironaphthooxazine derivatives which can be applied in molecular devices by a change of molecular level energy and a refractive index. In order to investigate the photoisomerization of spironaphthooxazine derivatives at the air/water energy and a refractive index. In order to investigate the photoisomerization of spironaphthooxazine derivatives at the air/water interfaces, spironaphthooxazine derivatives with side alkyl chains were synthesized. The films of the spironaphthooxazine derivatives were characterized by the measurement of UV/vis spectroscopy, Brewster Angle Microscopy (BAM) and Atomic Force Microscopy (AFM). The monolayers of the spironaphthooxazine derivatives mixed with stearic acid were stable at the air/water interface and visualized by the measurement of BAM. The spironaphthooxazine derivative monolayers on the glass surface showed the maximum efficiency of diffraction as 0.99% by the measurement of holography.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.230-230
• /
• 2013

In amorphous or microcrystalline thin-film silicon solar cells, p-i-n structure is used instead of p/n junction structure as in wafer-based Si solar cells. Hence, these p-i-n structured solar cells inevitably consist of many interfaces and the cell efficiency critically depends on the effective control of these interfaces. In this study, in-situ plasma treatment process of the interfaces was developed to improve the efficiency of a-Si:H solar cell. The p-i-n cell was deposited using a single-chamber VHF-PECVD system, which was driven by a pulsed-RF generator at 80 MHz. In order to solve the cross-contamination problem of p-i layer, high RF power was applied without supplying SiH4 gas after p-layer deposition, which effectively cleaned B contamination inside chamber wall from p-layer deposition. In addition to the p-i interface control, various interface control techniques such as thin layer of TiO2 deposition to prevent H2 plasma reduction of FTO layer, multiple applications of thin i-layer deposition and H2 plasma treatment, H2 plasma treatment of i-layer prior to n-layer deposition, etc. were developed. In order to reduce the reflection at the air-glass interface, anti-reflective SiO2 coating was also adopted. The initial solar cell efficiency over 11% could be achieved for test cell area of 0.2 $cm^2$.

• 디자인학연구
• /
• 제18권4호
• /
• pp.119-128
• /
• 2005

본 논문에서는 다양한 조형작업의 프로세스 및 도구에 대한 현장조사를 바탕으로 직관적이며 사용자 인지모델에 친숙한 3차원 모델링 인터페이스를 제안한다. 전문적인 디자인 모형제작, 찰흙 조소, 나무 조각, 유리 공예 돈의 모델링 현장을 방문하여 조형작업의 과정, 도구, 작업행태 등을 관찰 분석하였다. 이러한 현장조사를 바탕으로 스프레이 메타포(Spray Metaphor)에 기반 한 스프레이 모델링(Spray Modeling) 인터페이스를 제안하였다. 이는 스프레이 건(Spay Gun)의 입자 분사 방식과 찰흙 조소의 모형제작 프로세스를 결합한 가상 혹은 증강현실 공간상의 3차원 모델링 인터페이스 방식이다. 찰흙 조소에서 덩어리를 덧붙여 가듯이 가상치 단위입자를 대략적인 프레임 위에 분사하면서 형태를 발전시킬 수 있다. 또한 실제 공기분사 반작용을 느낄 수 있는 스프레이 장치를 활용함으로써 실체적 사용자 인터페이스를 제공한다. 프로토타입 개발과 사용자 평가를 통해 스프레이 모델링이 새로운 형식의 형태 발상과 표현을 지원함을 알 수 있었다. 또한 구체적인 조작 인터페이스, 보조적인 도구의 사용 등의 개선 사항을 파악하였다. 본 연구는 가상 및 증강 현실에서의 디자이너들이 활용할 수 있는 새로운 인터페이스에 대한 가능성을 검토하였다는 점에서 의의를 갖는다. 이는 디자인 혹은 예술분야의 3차원 모델링 뿐만 아니라, 컴퓨터 작업공간의 인터페이스 방식으로 응용, 게임, 교육, 미디어 아트 등에 적용할 수 있으리라 기대된다.

• 접착 및 계면
• /
• 제19권1호
• /
• pp.13-18
• /
• 2018

루테늄촉매는 대기중에 노출되었을 때, 촉매활성정도가 떨어지게 된다. 루테늄 촉매의 촉매활성변화를 대기노출 일수에 따라 표면장력방법을 이용하여 정량적으로 확인하였다. 각 대기노출일수에 따른 루테늄 촉매를 이용하여 DCPD 중합 후 기계 및 계면물성변화를 확인하였다. 희석제와 10:1로 섞인 루테늄 촉매를 대기 중에 노출 시킨 후 각 일수에 따라 색깔 관찰하였다. 윌헴리 및 PTFE를 이용하여 표면장력을 구하고 이를 촉매활성 정도와 연관시켰다. 각 촉매를 이용하여 DCPD를 중합시키는 데 발열량을 실시간으로 측정하였다. 경화 후 p-DCPD에 대하여 인장강도를 측정하여 물성감소정도를 확인하였다. 또한, 유리섬유 간 마이크로드롭렛 풀 아웃 실험을 통하여 계면물성 또한 파악하였다. 표면장력방법을 통하여 촉매활성 정도를 확인하였을 때, 4일까지는 33 dyne/cm로 안정적이었지만, 6일 이후로 표면장력이 34 dyne/cm 이상 증가하는 것을 확인하였고, 이는 촉매의 산화와 연관시킬 수 있었다. 기계적 물성 확인하였을 때, 인장강도 및 계면강도 또한 6일 (인장강도: 38 MPa. 계면전단 강도: 26 MPa) 까지는 안정적이었지만 10일 (인장강도: 15 MP. 계면전단강도: 3 MPa) 이후로 물성이 급격하게 감소하는 것을 확인하였다.