• Title/Summary/Keyword: air-spring shell

Search Result 9, Processing Time 0.022 seconds

Finite Element Analysis of Air Springs with Fiber-Reinforced Rubber Composites Using 3-D Shell Elements (3차원 셸 요소를 이용한 섬유보강 고무모재 공기 스프링의 유한요소해석)

  • Lee, Hyoung-Wook;Huh, Hoon
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.25 no.4
    • /
    • pp.602-609
    • /
    • 2001
  • This paper is concerned with the orthotropic problem of diaphragm-type air springs which consist of rubber linings, nylon reinforced rubber composite and bead ring. The analysis is carried out with a finite element method developed to consider the orthotropic properties, geometric nonlinearity using four-node degenerated shell element with reduced integration. Physical stabilization scheme is used to control the zeroenergy mode of the element. The analysis includes an inflation analysis and a lateral analysis of an air spring for the deformed shape and the spring load with respect to the vertical and l ateral deflection. Numerical results demonstrate the variation of the outer diameter, the fold height, the vertical force and the lateral force with respect to the inflation pressure and the lateral deflection.

Large deformation analysis of inflated air-spring shell made of rubber-textile cord composite

  • Tran, Huu Nam;Tran, Ich Thinh
    • Structural Engineering and Mechanics
    • /
    • v.24 no.1
    • /
    • pp.31-50
    • /
    • 2006
  • This paper deals with the mechanical behaviour of the thin-walled cylindrical air-spring shell (CAS) made of rubber-textile cord composite (RCC) subjected to different types of loading. An orthotropic hyperelastic constitutive model is presented which can be applied to numerical simulation for the response of biological soft tissue and of the nonlinear anisotropic hyperelastic material of the CAS used in vibroisolation of driver's seat. The parameters of strain energy function of the constitutive model are fitted to the experimental results by the nonlinear least squares method. The deformation of the inflated CAS is calculated by solving the system of five first-order ordinary differential equations with the material constitutive law and proper boundary conditions. Nonlinear hyperelastic constitutive equations of orthotropic composite material are incorporated into the finite strain analysis by finite element method (FEM). The results for the deformation analysis of the inflated CAS made of RCC are given. Numerical results of principal stretches and deformed profiles of the inflated CAS obtained by numerical deformation analysis are compared with experimental ones.

Finite Element Analysis of Air Springs with Fiber-Reinforced Rubber Composites using 3-D Shell Elements (3차원 쉘 요소를 이용한 섬유보강 고무모재 공기 스프링의 유한요소 해석)

  • Lee, Hyoung-Wook;Huh, Hoon;Kim, Jin-Young;Jeong, Soo-Gyo
    • Proceedings of the KSME Conference
    • /
    • 2000.04a
    • /
    • pp.274-279
    • /
    • 2000
  • This paper is concerned with the orthotropic problem of diaphragm-type air springs which consist of rubber linings, nylon reinforced rubber composite and bead ring. The analysis is carried out with a finite element method developed to consider the orthotropic properties, geometric nonlinearity using four-node degenerated shell element with reduced integration. Physical stabilization scheme is used to control the zero-energy modes of the element. An inflation analysis and a lateral deformation analysis of an air spring are carried out. Numerical analysis results demonstrate the variation of the outer diameter, the fold height, the vertical force and the lateral force.

  • PDF

Analysis of the Mechanical Behavior of Bellows for Electromagnetic Control Valve (전자기 제어 밸브를 위한 벨로우즈의 기계적 거동에 관한 연구)

  • Son, In-Seo;Hwang, Seon;Shin, Dong-Kil
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.17 no.3
    • /
    • pp.432-437
    • /
    • 2016
  • The behavior of a bellows for an electromagnetic control valve was investigated. The bellows consists of an outer metal bellows, inner spring, and metal caps. The bellows needs to have sensitive and precise motion against external loads and pressure loads in order to control the position of the valve accurately. The spring constant of the inner spring and load-displacement curve of the bellows set were measured using a test machine. The inner spring showed a linear relation between load and displacement. The bellows set showed small stiffness at small displacement, and then the stiffness slightly increased upon subsequent displacement. Based on the measured data, finite element analysis was performed. Axisymmetric conditions were applied, and shell elements were used. The effective material properties of the outer bellows material were extracted. Additional analysis was performed, and the behavior of the bellows was analyzed using the finite element model.

Thermo-Fluid-Structure Coupled Analysis of Air Foil Thrust Bearings using Shell Model (쉘 모델을 이용한 공기 포일 스러스트 베어링의 열-유체-구조 연동 해석)

  • Jong wan Yun;So yeon Moon;Sang-Shin Park
    • Tribology and Lubricants
    • /
    • v.40 no.1
    • /
    • pp.17-23
    • /
    • 2024
  • This study analyzes the thermal effects on the performance of an air foil thrust bearing (AFTB) using COMSOL Multiphysics to approximate actual bearing behavior under real conditions. An AFTB is a sliding-thrust bearing that uses air as a lubricant to support the axial load. The AFTB consists of top and bump foils and supports the rotating disk through the hydrodynamic pressure generated by the wedge effect from the inclined surface of the top foil and the elastic deformation of the bump foils, similar to a spring. The use of air as a lubricant has some advantages such as low friction loss and less heat generation, enabling air bearings to be widely used in high-speed rotating systems. However, even in AFTB, the effects of energy loss due to viscosity at high speeds, interface frictional heat, and thermal deformation of the foil caused by temperature increase cannot be ignored. Foil deformation derived from the thermal effect influences the minimum decay in film thickness and enhances the film pressure. For these reasons, performance analyses of isothermal AFTBs have shown few discrepancies with real bearing behavior. To account for this phenomenon, a thermal-fluid-structure analysis is conducted to describe the combined mechanics. Results show that the load capacity under the thermal effect is slightly higher than that obtained from isothermal analysis. In addition, the push and pull effects on the top foil and bump foil-free edges can be simulated. The differences between the isothermal and thermal behaviors are discussed.

Seasoning of Commercial Wood Using Solar Energy (태양에너지를 이용한 유용목재의 건조)

  • Jung, Hee-Suk;Lee, Hyoung-Woo;Lee, Nam-Ho;Lee, Sang-Bong
    • Journal of the Korean Wood Science and Technology
    • /
    • v.16 no.4
    • /
    • pp.10-39
    • /
    • 1988
  • This study investigated the temperatures and relative humidities in the semi-greenhouse type solar dryer with a black rock-bed heat storage and without heat storage and outdoor temperature and relative humidity at 9 a.m. and 2 p.m.. A comparison was made of the drying rates, final moisture contents, moisture content distributions, casehardening stresses, drying defects, volumetric shrinkage of dried lumber for solar- and air-drying from the green condition of mixtures of Douglas-fir, lauan, taun, oak and sycamore 25mm- and 50 mm-thick lumber during the same period for four seasons, and heat efficiencies for solar dryer with and without the heat storage for saving of heat energy and the cost of lumber drying using the solar energy. The results from this study were summarized as follows: I. The mean weekly temperatures in the solar dryers were 3 to $6^{\circ}C$ at 9 a.m. and 9 to $13^{\circ}C$ at 2 p.m. higher than mean outdoor temperature during all the drying period. 2. The mean weekly relative humidities in the solar dryers were about 1 to 19% at 9 a.m. higher than the outdoor relative humidity. and the difference between indoor and outdoor relative humidity in the morning was greater than in the afternoon. 3. The temperatures and relative humidities in the solar dryer with and without the heat storage were nearly same. 4. The overall solar insolation during the spring months was highest and then was greater in the order of summer, atumm, and winter month. S. The initial rate of solar drying was more rapid than that of air drying. As moisture content decreased, solar drying rate became more rapid than that of air drying. The rates of solar drying with and without heat storage were nearly same. The drying rate of Douglas-fir was fastest and then faster in the order of sycamore, lauan, taun and oak. and the faster drying rate of species, the smaller differences of drying rates between thicknesses of lumber. The drying rates were fastest in the summer and slowest in the winter. The rates of solar drying during the spring were more slowly in the early stage and faster in the later stage than those during the autumn. 6. The final moisture contents were above 15% for 25mm-thick air dried and about 10% for solar dried lumber, but the mean final MCs for 50mm-thick lumber were much higher than those of thin lumber. The differences of final MC between upper and lower course of pile for solar drying were greater than those of pile for air drying. The differences of moisture content between the shell and the core of air dried lumbers were greater than those of solar dried lumber, smallest in the drying during summer and greatest in the drying during winter among seasons. 7. Casehardening stresses of 25mm- and 50mm-thick dried lumber were slight, casehardening stress of solar dried lumber was severer than that of air dried lumber and was similar between solar dried lumber with and without heat storage, Casehardening stresses of lumber dried during spring were slightest and then slighter in the order of summer, autumn, and winter. Casehardening stresses of Douglas -fir, sycamore and lauan were slight, comparing with those of taun and oak. 8. Maximum initial checks of 25mm-thick lumber occurred above and below fiber saturation point and those of 50mm-thick lumber occurred in the higher moisture content than thin lumber. As the moisture content decreased, most of checks were closed and didn't show distinct difference of the degree of checks among drying methods. The degree of checks were very slight in case of Douglas-fir and lauan, and severe in case of taun and oak. The degree of checks for 50mm-thick lumber were severer than those for 25mm-thick lumber. 9. The degree of warpage showed severe in case of oak and sycamore lumber, but no warping was found in case of Douglas-fir, lauan and taun. 10. The volumetric shrinkages of taun and oak were large and medium in case of Douglas-fir, lauan and sycamore. 11. Heat efficiencies of solar dryer with heat storage were 6.9% during spring, 7.7% during summer, 12.1% during autumn and 4.1% during winter season. Heat efficiency of solar dryer with heat storage was slightly greater than that of without heat storage. As moisture content of lumber decreased, heat efficiency decreased.

  • PDF

Interesting Cases of Foreign Bodies in Air way -Report of Seven Cases- (최근 경험한 흥미있는 기도이물 7증례)

  • Lee, Hwa-Sik;Moon, Young-Chul;Cho, Seung-Ho;Kim, Hoon
    • Proceedings of the KOR-BRONCHOESO Conference
    • /
    • 1982.05a
    • /
    • pp.8.1-8
    • /
    • 1982
  • Foreign bodies in the airway are very import-tant and not uncommon conditions in the field of E.N.T., and practically there are many reports of them. Occasionally, it can be followed by some pulmonary complications and technical difficulty to remove. Therefore, foreign body in the trachea-bronchial tree is serious and, on occasion, fatal. Recently, the authors experienced 7 interesting cases of foreign bodies in the airway and a brief review of literature was made. Case 1. (1 year old male): A bit of walnut was coughed out spontaneously. Case 2. (2 years old male): A bit of raw chestnut was removed from the right main bronchus. Case 3. (21 Years old male): A pushpin was removed from the left main bronchus. Case 4. (1 year old male): A kind of bean was removed from the right main vronchus. Case 5. (4 years old male): A coiled steel spring (1.1cm$\times$2cm) was removed from the subglottic region. Case 6. (5 years old female): A shell of pine nut which had been impacted in the wall of right main bronchus was removed during right middle and lower lobectomy. Case 7. (2 years old male): A metal nail was removed from the rightposterior basal segmental bronchus during right lower lobectomy.

  • PDF

Studies on the Mulberry Variety "Yongchonppong"(Morus alba L.) II. Increasing Effect of Mulberry Leaf Value for Food by Cover Rearing with Vinylon Gauze (용천뽕에 관한 연구 II. 한랭사 피복사육에 따른 용천뽕(Morus alba L.)의 사료가치)

  • 박광준;양성렬
    • Journal of Sericultural and Entomological Science
    • /
    • v.35 no.1
    • /
    • pp.21-27
    • /
    • 1993
  • Yongchonppong is liable to withering of leaf and it is lowering leaf value for the feed. In this respect, covering of the vinylon gauze over the feed has been carried out in the branch rearing system to sustain leaf value as itself. The covering of the vintlon gauze over Yongchonppong marks 7% and 9% increment of cocoon yield in dry season, spring rearing season, as compared to the non-covering of the vinylon gauze over Kaeryangppong and Yongchonppong, respectively. There was no significant differences in cocoon shell percentages of them. In more humid environment than average relative humidity in Korea the rearing results of "Yongchonppong" was improved by covering with vinylon gauze after feeding compared with the non-covered rearing. However, the vinylon guage covering was not effective for improving the rearing results of "Kaeryangppong". No effect of the vinylon gauze covering was seen in the area where it frequently rains and raining season lasts. In case of the non-covering of the vinylon gauze, Yongchonppong reduces repidly in the first three hours of exposure to the air, as compared to Kaeryangppong. The water content reductions rate of Yongchonppong in 6 hours of exposure to the air marks 7% to so when the dry vinylon gauze cover and 17 to 26% when the wet vinylon gauze covers, as compared to 58.8% of it for the noncovering of the vinylon gauze.f the vinylon gauze.

  • PDF

Studies on the Mulberry Variety Yongchonppong I. Physico-chemical Properties of Yongchonppong and Differencies of Leaf Value for Food in Growing Silkworm through Different Feeding Period. (용천뽕에 관한 연구 I. 용천뽕의 이화학성과 상잠기간 급여시기에 따른 사료가치의 차이)

  • 박광준;양성열
    • Journal of Sericultural and Entomological Science
    • /
    • v.32 no.2
    • /
    • pp.94-100
    • /
    • 1990
  • Yongchonppon, one of the native varities, is the highest clod resistant. For its practical use, feeding test has been implemented in the ordinary rearing and in the branch rearing 1987 through 1988. The results are summarized as follows. 1. The feeding of Yongchonppong at the 4th and 5th instar made 5% decrease in spring and 10% decrease of cocoon yield in autumn, respectively, while cocoon shell ratio was a little less and percentage of raw silk was a little high, as compared to the feeding of Kaeryangppong. 2. The feeding of Yongchonppong at the 4th instar only showed nearly same nearing result as the feeding of Kaeryangppon. 3. In case of the feeding of yongchonppong at the 4th instar and early stage of the 5th instar, cocoon yield and percentage of raw silk marked 96% and 97-98% of Kaeryangppong. 4. The total nitrogen and crude protein of Yongchonnppong was less, while the total carbohydrate, crude ash and crude fat were high, as compared to those of Kaeryangppong. It had more phosphate and boric and less manganese than Kaeryangppong. 5. The leaf aereal weight of Yongchonppong was 1.57g/dcm2 and the leaf thickness was 113$\mu$. The moisture reducing rate marked 41.3% after three hour exposure to the air.

  • PDF