• Transactions on Electrical and Electronic Materials
• /
• 제6권6호
• /
• pp.284-288
• /
• 2005

We have systematically studied the superconducting properties and flux pinning enhancement of $(Y_{0.33}Sm_{0.33}Nd_{0.33})\;Ba_2Cu_3O_y$ [(YSN)-123] composite oxides by melt growth process in air. A sample prepared by this method showed well-textured microstructure, and $(Y_{0.33}Sm_{0.33}Nd_{0.33})\;BaCuO_5$ [(YSN)211] nonsuperconducting particles were uniformly dispersed in large (YSN) 123 superconducting matrix. The sample showed a sharp superconducting transition at 91 K. The magnetization measurements of the (YSN)-123 sample exhibited the enhanced flux pinning, compared with $YBa_2Cu_3O_y$ (Y-123) sample without Sm and Nd. Critical current densities of (YSN)-123 sample was $2.5{\times}10^4 A/cm^2$ at 2 T and 77 K.

• 설비공학논문집
• /
• 제27권9호
• /
• pp.475-483
• /
• 2015

In Korea, a typically hot and humid summer means that air-conditioners consume a large quantity of electricity; accordingly, the simultaneous usage of an indirect evaporative cooler may reduce the sensible-heat level and save the amount of electricity that is consumed. In this study, the heat-transfer and pressure-drop characteristics of an indirect evaporative cooler made of paper/plastic film were investigated under both dry and wet conditions; for the purpose of comparison, an indirect evaporative cooler made of plastic film was also tested. Our results show that the indirect evaporative efficiencies under a wet condition are greater than those under a dry condition, and the efficiencies of the paper/plastic sample (109% to 138%) are greater than those (67% to 89%) of the plastic sample; in addition, the wet-surface, indirect evaporative efficiencies of the paper/plastic sample are 32% to 36% greater than those of the plastic sample. Further, the wet-surface pressure drops of the paper/plastic sample are 13% to 23% larger than those of the plastic sample, and this might have been caused by the surface roughness of the samples. A rigorous heat-transfer analysis revealed that, for the plastic sample, 30% to 37% of the wet channels remained dry, whereas all of the channels were wet for the paper/plastic sample.

• 한국식품영양학회지
• /
• 제12권3호
• /
• pp.258-264
• /
• 1999

This study was carried out to investigate the status in weight loss yield of edible meat quality and free amino acid contents of the snow crab(Chionoectes japonicus) by steaming and various drying treat-ment. Change of body weight loss in steaming treatment sample were 20.48∼26.72% and yield of edible meat of steaming sample was higher than raw sample(p<0.05) The pH value was increased with steam-ing and drying and pH of trunk meat was more increased than leg meat. Volatile basic nitrogen(VBN) content of vacuum dried sample was highest and VBN of hot-air and freezing dried sample were about 10mg%. Content of vaccum dried sample wre 41.33 and 48,56mg%. Thirty kind of free amino acids dectected in the snow crab and changes of free amino acid in leg meat were markedly reduced by vacuum drying and the reducing ratio of leg meat by freeze drying was little. The major free amino acid of leg and trunk meat were 39.94% 46.78% respectively. The formation of flavor free amino acid in freezing dried sample were high but its hot-air aried sample were small.

• Nuclear Engineering and Technology
• /
• 제33권1호
• /
• pp.62-72
• /
• 2001

The one-dimensional finite element program was developed to analyze the coupled behavior of heat, moisture, and air transfer in unsaturated porous media. By using this program, the simulation results were compared with those from the laboratory infiltration tests under isothermal condition and temperature gradient condition, respectively. The discrepancy of water uptake was found in the upper region of a bentonite sample under isothermal condition between numerical simulation and laboratory experiment. This indicated that air pressure was built up in the bentonite sample which could retard the infiltration velocity of liquid. In order to consider the swelling phenomena of compacted bentonite which cause the discrepancy of the distribution of water content and temperature, swelling and shrinkage factors were incorporated into the finite element formulation. It was found that these factors could be effective to represent the moisture diffusivity and unsaturated hydraulic conductivity due to volume change of bentonite sample.

• Preventive Nutrition and Food Science
• /
• 제16권2호
• /
• pp.189-193
• /
• 2011

Kohlrabi (Brassica oleracea var. gongylodes L.) slices were dehydrated with maltodextrin (MD) at concentrations of 20, 30, and 40% (w/w), and the dried samples were compared with the freeze-dried and hot-air dried samples regarding various physicochemical qualities. The MD-treated samples had better results than those of freeze-dried or hot-air dried samples in terms of rehydration ratio and color. The total phenolic content of the MD-treated sample was similar to that of the freeze-dried and higher than that of hot-air dried sample. The ascorbic acid content of the MD-treated samples was also higher than that of the hot-air dried one. These results suggest that kohlrabi can be dehydrated with MD instead of hot air.

• Communications for Statistical Applications and Methods
• /
• 제8권3호
• /
• pp.739-751
• /
• 2001

In this paper, a sample design is studied for 2000 forestry management survey of five types forestry , tree felling, gathering of pine mushroom, growing of nut trees, growing of wild flowers, and lumbering industry. We introduce population stratification and a modified stratified cut-off sampling which deal with determination of sample size, sample allocation, and estimation of total and variance of estimator. Substitution of sample units and imputation of nonresponse units are discussed for reducing the nonsampling errors.

• 한국산학기술학회논문지
• /
• 제14권12호
• /
• pp.6072-6081
• /
• 2013

본 연구에서는 냉각탑 출구의 상대습도를 낮춰 백연을 저감하기 위한 목적으로 쉐브론형, 웨이브형 그리고 딤플형 공기가열기 시료에 대한 성능시험을 수행하였다. 실험은 시료의 전방풍속 1~3 m/s, 물 유량 0.19~0.33 kg/s 범위에서 수행되었다. 실험 결과 모든 시료에서 전열량은 전방풍속과 물 유량이 증가할수록 증가하였다. 공기측 압력손실도 풍속이 증가할수록 증가하였다. 동일 풍속에서 전열량은 쉐브론 형상에서 가장 크고 (평판의 1.5~1.7배) 딤플, 웨이브, 평판 순으로 나타났다. 소비동력 대비 전열량도 쉐브론 형상에서 딤플 형상보다 15% 정도 크게 나타났다. 하지만 다른 세 종류의 형상에서는 큰 차이를 보이지 않았다.

• Safety and Health at Work
• /
• 제10권3호
• /
• pp.389-392
• /
• 2019

When conducting an exposure assessment, the primary goal of the industrial hygienist is to fully characterize the worker's exposure during a work shift to compare it with an occupational exposure limit. This applies regardless of the duration of the work activity as an activity that is relatively short in duration can still present exposure in excess of the occupational exposure limit even when normalized over an 8-hr shift. This goal, however, is often impeded by the specification of a minimum sample volume in the published sampling method, which may prevent the sample from being collected or submitted for analysis. Removing the specification of minimum sample volume (or adjusting it from a requirement to a recommendation), in contrast, allows for a broader assessment of jobs that consist of short-duration and high-exposure activities and also eliminates the unnecessary practice of running sampling pumps in clean air to collect a specified, minimum volume.

• 지질공학
• /
• 제34권1호
• /
• pp.137-146
• /
• 2024

우리나라의 한국산업표준(KS F)에는 105 ± 5℃로 노건조된 암석을 대기중에 꺼내어 저울에 무게를 측정하도록 하고 있다. 그러나 건조로 외부의 대기에 노출된 암석에서는 대기중의 수분을 흡수하여 무게가 증가하는 문제가 발생된다. 본 연구에서는 정육면체 모양으로 가공된 크기가 다른 8개의 황등화강암 시편을 사용하여 측정 방법에 따른 건조무게를 측정하고 비교 분석하였다. 대기중에서 측정된 특이점의 건조무게는 건조로 속에서 측정된 건조무게에 비하여 더 작게 나타났다. 건조 방법에 따른 건조무게의 차이는 암석의 크기와 양(+)의 상관관계를 나타내었고, 암석의 단위무게당 건조무게 차이는 암석의 크기가 클수록 오히려 작아지는 음(-)의 상관관계를 나타내었다. 대기중 노출된 암석의 무게는 가열된 암석 주위에서 발생되는 대류의 영향과 대기중 수분 흡수로 인한 영향의 크기에 따라 결정되며, 특이점은 두가지 영향의 크기가 같을 때 발생된다. 암석의 크기가 클수록 특이점 발생까지의 시간이 더 오래 걸리고 무게의 감소량도 증가되었다. 또한, 수분 흡수에 의한 초기 측정 무게까지 회복되는 시간도 더 오래 걸렸다. 향후, 특이점의 무게와 건조로 내부에서 측정된 건조 무게에 관한 연구를 통하여 현재 한국산업표준(KS F) 시험규정의 한계점을 보완할 수 있을 것이다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 추계학술발표대회 논문집
• /
• pp.21-25
• /
• 2009

This study is about heat island as one of the urban climate variation factors in urbanized modern society, which compared and observed the thermal characteristics both the downtown location and the outskirt site in summer. The diurnal air temperature range at each point is $12.6^{\circ}C$ in the downtown location and $14.3^{\circ}C$ in the outskirt site, so, it was found that the diurnal air temperature range in the outskirt site was $1.7^{\circ}C$ higher than in the downtown location. There was 20 minutes difference to reach the highest temperature between globe temperature and air temperature in the downtown location, however, the time spent to reach the highest temperature between globe temperature and air temperature in the outskirt site was the same. When we compared the globe temperature between the downtown location and outskirt site, we found that the temperature in the outskirt site was lower than in the downtown location after sunset due to the sudden temperature drops, although the exposed time to insolation in the outskirt site is longer. The average of globe temperature difference on the sample days was $1.1^{\circ}C$, the average of surface temperature difference on the sample days was $1.0^{\circ}C$, and the average of air temperature difference on the sample days was $2.0^{\circ}C$ Thus, it was found that the average of air temperature difference was higher than the average of globe temperature and the average of surface temperature. The result of this study is that the urban environment factors have more effect on the air temperature difference than globe temperature and surface temperature.