• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.3 no.3
• /
• pp.176-185
• /
• 1991

Pressure drop and flow characteristics through a filter medium have been investigated numerically. A basic model similar to the filter employed in a hard disk drive was established so that the inflow velocity was 0.1 m/s and the box size was $40mm{\times}50mm{\times}30mm$. The filter medium specifications were 0.38mm of thickness, $1{\mu}m$ of fiber diameter, 0.05 of packing density. And the filter medium was pleated by 10 within the filter box. Twenty-one sets of calculation were performed with different inlet velocities, pleated numbers, and packing densities from the basic model. As the result, it was found that the velocity after filter medium had maximum value at the rear of the upstream pleated line, but had minimum value at the rear of the downstream pleated line. This made the velocity distribution have sinusoidal form immediately after the filter medium. As the inlet velocity increased, the pressure drop increased linearly. But as the packing density increased the pressure drop increased quadratically.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.1
• /
• pp.1-7
• /
• 2004

This study has been numerically conducted to investigate the removal efficiency of Volatile Organic Compound (VOC) for different photocatalytic honeycomb filters. Recently, the photocatalysis is being applied to air-cleaner, air-conditioner and vacuum-cleaner with the capability of air-purification, sterilization and antibiosis. However, photocatalysis is less efficient than other methods for removing VOC except in the case of low concentration. So far most of studies have focused on an improvement of the photocatalytic materials, but this study have placed emphasis on the improvements of shape of photocatalytic honeycomb filter. UV irradiation, concentration profile and pressure drop have been investigated for different cross sections of filters and for different filter lengths. Light intensity is dropped sharply with increasing distance from the UV-lamp, and becomes very low in the middle of the filters. Since photocatalytic reaction rate is a function of light intensity, VOC concentration gradient might be small in the middle of long filters. Thus, most of reaction have risen within only three times of dimensionless axial distance. These results can be used effectively for the design of advanced photocatalytic honeycomb filters.

• Journal of Korean Society on Water Environment
• /
• v.22 no.1
• /
• pp.45-50
• /
• 2006

This study was performed to evaluate the air lift reactors (ALR) by variations of HRT and recycling rate. Air lift reactor was composed of bioreactor and clarifier above it. To remove organic matters and nitrogen through the formation of microbic film and filtration, bio-filter reactors were filled with clay, glass, bead, waste plastic, respectively. Influent wastewater was fed to biofilter reactor, and effluent wastewater from bio-filter reactor was injected ALR again, instead of adding external carbon source. Effluent BOD concentration was satisfied with lower than 10 mg/L in recycling rate 100% regardless of the variation of HRT and the kinds of media materials. In HRT 4 hr, recycling rate 100%, BOD removal efficiency rate was from about 85 to 90%, COD removal efficiency rate was higher than 90%. Effluent TN concentration was satisfied with less than 20 mg/L, if HRT was maintained by over than 6 hr regardless of recycling rate and media materials. Over than HRT was 4 hr, microbes concentration in air lift reactor was maintained over than 2,500 mg/L constantly, not sensitive to environmental condition, and organic removal was effective as it was higher.

• Elastomers and Composites
• /
• v.49 no.1
• /
• pp.1-12
• /
• 2014

Blocking of fuel filter in aircraft greatly can affect loss of pilot's life and of the aircraft. The investigation of failures is, thus, of vital importance in preventing incidents in advance. The fuel filter of aircraft plays an important role in filtering various debris from jet fuel. It filters impurities smaller than 10 ${\mu}m$ particles from jet fuel provided with the speed of 1,330 pounds per hour. It must be replaced per 500 h on the basis of operating time. However, even before reaching 500 h, the warning sign lighted on due to blocking of fuel filter. Recently, these similar defects have happened repeatedly. Therefore, in this study, the cause of blocking fuel filter in aircraft was investigated using various analytical techniques such as FT-IR microscopy, FE-SEM/EDS, and total sulfur determinator. Consequently, the blocking material of fuel filter was identified to an accelerator from the integral fuel tank sealant. And a mechanism for the formation of the blocking material of fuel filter by an accelerator blooming phenomenon in fuel tank was suggested.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.154-157
• /
• 2001

The effects of pleating parameters on the performance of cylindrical cartridge air filters was experimentally studied. The tested filters are 150 mm in outer diameter and 700 mm in length. As the pleat count increases, the pressure drop across a cartridge filter is decreased for a constant pleat depth and flow rate. This is due to the increased filtration area which brings out less pressure loss of the filter. However, in the case of the filters having the pleat depth of 40 mm, the inner diameter of the cartridges is so small that the pressure loss is greatly increased.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.4
• /
• pp.58-64
• /
• 2009

This study was carried out to prepare high porosity pulp for oil and air filter media from commercial grade NBKP with 6 - 20% NaOH treatment. The fiber width of NBKP remarkably decreased by NaOH pretreatment. The air permeability of the test sheet prepared from alkali-pretreated NBKP increased with increasing NaOH concentration up to 15%. The burst factor was greatly decreased by alkali pretreatment. By 15 - 20% NaOH pretreatment of NBKP, it could be possible to prepare a high porosity pulp. It seems that the high porosity of the pulp was due to a strong swelling and a great change of the cellulose crystalline lattice from cellulose I to cellulose II with NaOH treatment of NBKP. The study suggested that alkali- pretreated NBKP could be used for manufacturing oil and air filter media.

• Journal of the Korean Ceramic Society
• /
• v.50 no.4
• /
• pp.245-250
• /
• 2013

A hydroxyapatite air filter was made with hydroxyapatite powder, water and chitosan solution. The structures of the sintered HAp samples were determined by MP-XRD. Hydroxyapatite has antibacteria properties against Staphylococcus aureus, Klebsiella pneumoniae and Escherichia coli. The bacteria removal rate was 99.9%. In the case of Pseudomonas aeruginosa, Colon bacterium and Listeria monocytogenes, the hydroxyapatite air filters had a clear zone which confirmed antibacteria properties. Using the microscopy, we observed that the HAp powder absorbed E. coli bacteria.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.1131-1136
• /
• 2006

In this study, an experimental and numerical analysis on the flow characteristics of heating and cooling unit installed within ceiling with functional modules was carried out. And the flow characteristics of the heating and cooling unit was investigated with the main parameters such as each filter and inside structure. The experimental results show the possibility of medium filter application. And the numerical results show that the effect of improved inside structure of heating-cooling and air-conditioning unit on flow distribution.

• Composites Research
• /
• v.35 no.3
• /
• pp.216-221
• /
• 2022

Recently, the worldwide demand for disposable masks has increased due to COVID-19 infections and severe air pollution. Personal masks should reduce breathe resistance while maintaining filtering performance. In this study, a solution blowing process is used to produce composite nanofiber filters to co-spin two polymers at once. The manufacture process of the various fiber diameter filter was designed, and the filtration performance and differential pressure of the prepared filter was investigated. Poly vinylidene fluoride-hexafluoropropylene (PVDF-HFP) and Polylactic acid (PLA) fibers were chosen to be entangled together in a layer with a diameter of 1.05 ㎛ and 0.33 ㎛. Composite nanofilters showed up to 87% filtration efficiency and 32 Pa differential pressure.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.567-568
• /
• 2021

In this paper, we design, fabricate, and test the performance of a cabin filter with LED modules of composite wavelengths containing UV-A and UV-C. Germs and air farms of the manufactured cabin filter confirmed sterilization capability in the sterilization test, and special chambers were manufactured to verify organic material decomposition capability in the organic compound decomposition test. Using colkates as photocatalytic was proved to be superior to using metal mash. The sterilization and air purification capabilities of the cabin filter produced throughout this study were verified through a similar environmental test.