• 한국산학기술학회논문지
• /
• 제14권2호
• /
• pp.816-821
• /
• 2013

본 논문은 ARM Cortex-M4 마이크로컨트롤러를 사용하여 3상 유도전동기용의 저가형 벡터제어 인버터를 설계하는 방법을 제안한다. 이 MCU는 냉장고, 에어컨, 세탁기와 같은 가전제품을 제어하기 위하여 기존의 값비싼 DSP 소자를 대신할 수 있다. 본 논문에서는 전동기 제어에 필요한 Cortex-M4의 주요 기능들을 정리하고, 이를 사용하여 벡터제어 인버터를 설계하는 방법을 기술한다. 실험용 벡터제어 인버터를 설계 제작하여 200[W]의 3상 유도전동기에 적용하였고, 이를 사용한 실험 결과는 기존의 TMS320F28335 DSP와 유사한 수준의 제어 성능을 보였다.

• 한국안전학회지
• /
• 제14권3호
• /
• pp.193-197
• /
• 1999

By the report of KISCO, the 54.20% of total disaster and the 20.87% of death disaster was caused by unsafe position-control. However, it is possible to decrease this kind of disaster rate by designing the control device in the consideration of safety. One of the most popular control device is vehicle instrument panel. Therefore, not only basic function but safe control under the driving environments should be considered when the vehicle instrument panel is designed. For safe control at the driving time, it is especially important to determine the priority of each part using emergency degree and usage frequency, and to set them with this priority for easy control position. In this paper, developing method to determine the priority of each part by pair-wise comparison for emergency degree and usage frequency was suggested and generated the mutual order weights to give them orders. To apply this method to the parts of instrument panel such as function button, audio, air conditioner, and other several detail parts, the direct questionnaire was implemented to drivers about the emergency degree and usage frequency of each part.

• 한국기계가공학회지
• /
• 제16권2호
• /
• pp.81-87
• /
• 2017

The pipe connection process using a clamping ring is used for joining small pipes in the refrigerator and air-conditioner industries instead of the brazing process, which induces inevitable thermal deformation in the pipes. However, few studies have been carried out on the process to select optimal parameters in joining pipes, and studies on the relation between the process parameters of the connection and connecting force of the joint have not been conducted. In this study, the connection process of pipes with the clamping ring was modeled using the finite element method (FEM) and analyzed to obtain the contact stress distribution between the pipes with which the connecting force of the joint was estimated. Considering the characteristics of pipe connection, the process was modeled and simulated in a two-dimensional axisymmetric solution domain. With the numerical model, the effect of ring shape on the connection was studied by adding a projection to the end of a ring or changing the length of a ring. The results of the analyses revealed that the contact stress distribution could be predicted with the suggested model. The effect of the ring shape was also presented. The effect of any combination of process parameters could be easily estimated through the related analyses.

• 한국소음진동공학회논문집
• /
• 제11권7호
• /
• pp.253-260
• /
• 2001

A Study of interior noise reduction in the magelv train is presented. Tarin speed of interest is low such that aero-dynamic noise is negligible and power supply system is a dominant noise source. Based on the measurements of interior noise and acceleration levels during running and zero speed conditions, dominant noise sources are identified. After spectra characteristics of noise sources are investigated several noise reducing methods are studied such as STL increasement of floor panels. sealing. and absorption treatment It is found that the most important noise sources are VVVF inverter and SLM in running condition, whereas air conditioner and DC/DC converter are dominant in zero speed. Sine the major noise sources are under the floor complete sealing and high STL of the floor panel are shown to be the most crucial factors in noise reduction After sound absorbing material, which is polyurethan foam of 50 mm thickness, is thickness, is attached to the downward side of the floor in addition to sealing treatment, the interior noise is reduced by 3~4 dB.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.289-294
• /
• 2002

In this study, performance, flow characteristics and noise of a cross-flow-fan system, used in indoor unit of the split-type air conditioner, were predicted by computational simulation. Triangular elements were used to mesh the calculation domain and quadrilateral elements were attached to the blade surfaces and walls to enhance the simulation quality. The unsteady incompressible Wavier-Stokes equations were solved using a sliding mesh technique on the interface between rotating fan region and the outside. Two stripes of velocity stream inside the cross-flow-fan were shown - the one was due to the eccentric vortex and the other was due to the normal entrance flow. As the flow rate increased, the center of the eccentric vortex moved toward the inner blade tip and rear-guide, and the exiting flow still had velocity variation along the stabilizer, which can increase the noise level. The acoustic pressure was calculated by using Lowson's equation. From the calculated acoustic pressure, it was found that the trailing edge is a dominant of acoustic generation.

• 한국자동차공학회논문집
• /
• 제18권6호
• /
• pp.138-144
• /
• 2010

If the vibration is occurred in a large-sized bus roof, it makes people annoying and complaining the quality of a large-sized bus. So in design stage, it must be considered. To assess vibration at the roof which is equipped with air conditioner in design stage, finite element model is constructed. Computer simulation analysis and experimental method are performed. The dynamic characteristics of the large-sized bus are found by using eigenvalue method. It is related with dynamic behavior. The running conditions of a large-sized bus are velocity and road condition which followed experimental conditions. And the frequency response of a large-sized bus is well correlated with analysis result. Modal participation method is used for finding major modes at each peak. Using this method, we found that front and rear suspension system, engine mounting system and roof structure are the major reasons of the roof vibration. To reduce vibration level of roof in a large-sized bus, spring stiffness of front and rear suspension system, spring stiffness of engine mounting system and roof structure are properly combined. From this study, the vibration characteristics of the roof structure of a large-sized bus can be to a satisfactory level.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1163-1168
• /
• 2005

This paper proposes a soft-remote-control (soft-remocon) system based on EMG signals for the Intelligent Sweet Home. The proposed system is applied to Intelligent Sweet Home which was developed to help the independence living of the elderly and physically handicapped individuals. The goal of proposed system is to control home-installed electronic devices such as TV, air-conditioner, curtain and lamp in Intelligent Sweet Home using EMG signals. Features such as VAR and DAMV having good separability performance are selected for pattern classification. FMMNN is adopted as a pattern classifier. Classification results are allowed to a developed remote control module and then corresponding infrared pulses can operate home-installed electronic devices. We concluded that EMG as an input interface for home-installed electronic devices in Intelligent Sweet Home.

• 한국인터넷방송통신학회논문지
• /
• 제10권5호
• /
• pp.287-291
• /
• 2010

본 논문에서는 차량 자동화 구현을 위한 센서네트워크 기반의 차량용 자동화 시스템을 설계 및 구현하였다. 이를 위하여 자동차내부의 각종 센서로부터 Zigbee 센서 망을 이용하여 무선으로 각종 센싱 데이터를 수집한 후 모니터 프로그램에서 이를 분석한다. 그리고 분석된 데이터를 무선 단말기와 인터페이스 시켜 차량의 상태 정보를 한눈에 운전자가 한눈에 파악할 수 있도록 하였다. 또한, 센서 네트워크 기반으로 온도센서, 습도센서 그리고 조도센서 등을 모니터링하고 이들 데이터를 기반으로 히터, 에어콘 및 차량의 실내등을 자동 구동시키는 차량 내 온/습도 자동제어 및 조도 자동조절기를 구현하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 정기총회 및 추계학술대회 논문집 학회본부
• /
• pp.19-22
• /
• 1993

Demand side management (DSM) is the planning and implementation of those utility designed to influence customer use of electricity in ways that will produce desired changes in the utility's load shape. It is conspicuous that the peak load control of DSM is efficiently adopted. In this paper, the package type air conditioner(A/C) mounted radio controlled switch. During the summer of 1990 KEPCO conducted tests in Seoul areas to determine the economic feasibility of interrupting A/C units for short periods of time during peak load periods. These tests were performed between July 30 and September 20 and were limited to the hours of between 1 and 6 p.m. These tests indicated that each A/C contributes approximately 4.5kW to the system peak and can be switched off 10 minutes out of each 1/2 hour without causing the customer any discomfort. Switching each A/C off for 10 minutes out of each 1/2 hour results in a peak load demand reduction of one kW per unit.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제6권3호
• /
• pp.223-231
• /
• 2006

In high-speed fuzzy control systems applied to intelligent systems such as robot control, one of the most important problems is the improvement of the execution speed of the fuzzy inference. In particular, it is more important to have high-speed operations in the consequent part and the defuzzification stage. To improve the speedup of fuzzy controllers for intelligent systems, this paper presents an integer line mapping algorithm to convert [0, 1] real values of the fuzzy membership functions in the consequent part to a $400{\times}30$ grid of integer values. In addition, this paper presents a method of eliminating the unnecessary operations of the zero items in the defuzzification stage. With this representation, a center of gravity method can be implemented with only integer additions and one integer division. The proposed system is analyzed in the air conditioner control system for execution speed and COG, and applied to the truck backer-upper control system. The proposed system shows a significant increase in speed as compared with conventional methods with minimal error; simulations indicate a speedup of an order of magnitude. This system can be applied to real-time high-speed intelligent systems such as robot arm control.