• The Journal of the Convergence on Culture Technology
• /
• v.5 no.3
• /
• pp.43-54
• /
• 2019

In this study, results of completion inspection are investigated according to the performance of the firefighting construction supervision personnel and according to the necessity of clean air supply in a performance test of the firefighting construction supervision personnel. The results of the completion inspection are measured and the causes of defects in the fire protection facilities after issuance of a completion inspection certificate are analyzed. The findings of this investigation can be used to minimize the risk of apartment fires and improve the performance of firefighting construction supervision personnel. The results of this study are summarized as follows. First, the results of the completion inspection conducted by the firefighting construction supervision personnel varies according to particular occupation. The performance of fire facility supervisors from design companies and fire construction companies were significantly higher than the fire officers. Therefore, it is necessary to employ supervisors who have experience in supervising the construction of apartments, in order to improve the performance of fire construction supervision officers. Second, the analysis of the completion inspection results according to the necessity of a clean air supply for performance tests of firefighting construction supervision personnel showed that the necessity of a clean air supply was significantly higher for fire facility supervisors from design companies and fire construction companies than for the fire officers. In order to improve, the completion inspection should be carried out up until the completion date of the building. In addition, a system needs to be established to ensure that clients are not able to demand that a completion inspection certificate be issued on the construction completion date. Finally, it is found that defects of completion inspection after issuance of a completion inspection certificate affects the result of the completion inspection. The results of the completion inspections conducted by the fire facility supervisors from design companies and fire construction companies were affected significantly less by defects than that of the general contractors. Research shows that faults have occured in firefighting facilities after the issuance of a completion inspection certificate due to the client and the construction company demanding the issuance of the completion inspection certificate.

• Journal of Environmental Health Sciences
• /
• v.33 no.1 s.94
• /
• pp.36-42
• /
• 2007

Diesel PM can be controlled using Diesel Particulate Filter, which can effectively reduce the level of soot emissions to ambient background levels. In the Heavy Duty Diesel area, the Continuously Regeneration trap has been widely applied in the retrofit market. As the Special act for the improvement of air quality in the capital area, the retrofit program for DPF to used diesel vehicle has progressed favorably and there are currently over 1,000 of these DPF in use in retrofit applications in korea. These DPF comprise a specially formulated Diesel Oxidation Catalyst upstream of a DPF. The $NO_2$ generated by the DOC is used to combust the carbon collected in the DPF at low temperature. To certificate DPF device that is suitable to domestic circumstances, it is necessary to evaluate exactly the DPF devices according to the regulation of DPF certificate test procedure for retrofit(ministry of environment(MOE) announcement NO. 2005-16). To do so the understand of that regulation like the standard of PM reduction rate is needed. In this study the test procedure including test cycle and BPT test condition was examined and also the test result for specific DPF was analyzed. In every test like field test, PM reduction efficiency test and seoul-10 mode test, no defect could be showed.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.11 no.2
• /
• pp.79-92
• /
• 2003

This study is to identify the hazard of ozone and to evaluate ozone effect that is flowed into the cabin when the airplane is flying at high altitude. For this purpose, it is studied that how ozone is generated in the air, what the effect on human body is due to the cabin ozone and what the design criteria is considering or preventing the ozone hazard. And, finally the regulations and means of compliance are studied and introduced to assure that the aircraft satisfies the design criteria related to ozone.

• Journal of Acupuncture Research
• /
• v.36 no.1
• /
• pp.28-32
• /
• 2019

Background: The purpose of this study was to collate inventors' improvements of air extraction cupping technology by reviewing patent applications in Korea. The cost of procurement and use of air extraction cupping devices are covered by health insurance. Methods: Patents registered in Korea for air extraction cupping devices from August 1992 to January 2018 (registration, expiration, rejection, abandonment, and disclosure) were analyzed to determine technology trends. The Korean patent search engine used was Kipris (www.kipris.or.kr). Results: Sixty-seven Korean patents for air extraction cupping devices were retrieved. Most patents focused on design of the top valve of the device, the device at the bottom, an internal device, and the disposable cupping glass. In total 17.9% of patents were registered and 64.2% were abolished [either from non-payment of registration fees (93%) or expiration of the patent after 10 years (7%)]. The average registration period was 3.7 years. Conclusion: The patents retrieved for this study focused on the development of the air exhaust valve, disposable cups, and skin adhesion maintenance technology in cupping devices that use air extraction. The average registration period was 3.7 years, meaning the patents that were not commercialized, expired without additional registration renewals. It is important to acquire a New Excellent Technology certificate for a cupping device to promote commercialization.

• Journal of Aerospace System Engineering
• /
• v.14 no.1
• /
• pp.44-53
• /
• 2020

In conjunction with the Fourth Industrial Revolution, the unmanned aerial vehicle industry is being developed to a new paradigm by combining advanced technologies such as AI, Big Data and the IoT. Aeronautical developed countries such as the U.S. are focusing their efforts on the development of the safer unmanned aerial vehicles. The Korea Aerospace Research Institute, as part of the national R&D project in 2011, had succeeded in developing the first vertical takeoff and landing (VTOL) UAS, called Smart-UAV. However, although the development technology of the VTOL UAS is possessed, developing and operating of the VTOL UAS for commercial or military use are limited. The type certification procedure of the VTOL UAS developed by domestic technology is stipulated in the Korean Aviation Safety Act, but the Korean VTOL UAS airworthiness standards (KAS) hsve not been established. Thus, this study investigated the development trends of the VTOL UAS in Korea and abroad and national certification systems and procedures, and benchmarked the special conditions for the VTOL aircraft, announced by the EASA on July 2, 2019, to establish standards for type certificate of the VTOL UAS in Korea.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.31 no.3
• /
• pp.161-171
• /
• 2023

The traditional safety management method starts with the misconception that similar accidents will recur if the inappropriate behavior of the person who caused the accident is investigated and punishment is not judged. However, in modern safety management, incidents or situations occur when negative conditions latent in the system are mutually influenced and triggered. The precedent for revoking the disposition of suspension of first officer A of Eastar Jet, which won a legal lawsuit against the administrative regulatory authority, is a representative example that will serve as an opportunity for the administrative regulatory authority to break away from the punishment-oriented safety management method of the past. On the other hand, airmans and air carriers also need to have a clear understanding of flight regulations, and when judicial judgment is required, predictable and effective legal effects can be obtained by preparing clear standards for flight regulations. In addition, administrative regulatory authorities expect a change from the punishment-oriented safety management policy of the past to a systematic safety management policy.

• The Korean Journal of Air & Space Law and Policy
• /
• v.30 no.1
• /
• pp.31-64
• /
• 2015

The Chicago Convention and Annexes have become the basis of aviation safety regulations for every contracting state. Generally, aviation safety regulations refer to the SARPs provided in the Annexes of the Chicago Convention. In order to properly reflect international aviation safety regulations, constant studies of the aviation fields are of paramount importance. Treaties duly concluded and promulgated under the Constitution and the generally recognized rules of international law shall have the same effect as the domestic laws of the Republic of Korea. Each contracting state to the Chicago Convention should meet ICAO SARPs about AOC and FAOC. According to ICAO SARPs, Civil Aviation Authorities shall issue AOC to air carriers of the state, but don't require to issue for foreign air carrier. However some contracting states of the Chicago Convention issue FAOC and/or Operations Specifications for the foreign operators. This FAOC is being expanded from USA to the other contracting states. Foreign operators have doubly burden to implement AOC of the ICAO SARPs because FAOC is an additional requirement other than that prescribed by the ICAO SARPs In Article 33, the Chicago Convention stipulates that each contracting state shall recognize the validity of the certificates of airworthiness and licenses issued by other contracting states as long as they are equal to or above the minimum standards of the ICAO. In ICAO Annex 6, each contracting state shall recognize as valid an air operator certificate issued by another contracting state, provided that the requirements under which the certificate was issued are at least equal to the applicable Standards specified in this Annex. States shall establish a programme with procedures for the surveillance of operations in their territory by a foreign operator and for taking appropriate action when necessary to preserve safety. Consequently, it is submitted that the unilateral action of the states issuing the FAOC to the foreign air carriers of other states is against the Convention. Hence, I make some proposals on the FAOC as an example of comprehensive problem solving after comparative study with ICAO SARPs and the contracting state's regulations. Some issues must be improved and I have made amendment proposals to meet ICAO SARPs and to strengthen aviation development. Operators should be approved by FAOC at most 190 if all states require FAOC. Hence, it is highly recommended to eliminate the FAOC or reduce the restrictions it imposes. In certain compliance-related issues, delayed process shall not be permitted to flight operations. In addition, it is necessary for the ICAO to provide more unified and standardized guidelines in order to avoid confusion or bias regarding the arbitrary expansion of the FAOC. For all the issue mentioned above, I have studied the ICAO SARPs and some state's regulation regarding FAOC, and suggested some proposals on the FAOC as an example of comprehensive problem solving. I hope that this paper is 1) to help understanding about the international issue, 2) to help the improvement of korean aviation regulations, 3) to help compliance with international standards and to contribute to the promotion of aviation safety, in addition.

• Journal of Aerospace System Engineering
• /
• v.14 no.spc
• /
• pp.49-55
• /
• 2020

The average probability of a lightning strike to transport aircraft operating in airline service has been estimated to be approximately one strike in every year (or one strike per 1,000 through 20,000 flight hours). The important thing is not the probability of a lightning strike to aircraft, but the fact that aircraft is struck by lightning. Therefore, lightning protection design for aircraft should be qualified and compliance with airworthiness standards related to lightning protection must be substantiated in the process of certification. In this paper, I studied means of compliance for lightning protection through analysis of some test cases, including the KC-100 airplane that firstly obtained civil type certificate in Korea. Based on this paper, it will be also necessary to study on the effect of lightning for space launch vehicles.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.7
• /
• pp.593-599
• /
• 2021

The demand for e-VTOL aircraft is expected to be increased rapidly in the future as a means of urban transportation due to operating cost reduction, eco-friendliness and convenience of vertical take-off and landing using pilot-aids automation system. However, there are many technical hurdles to be solved in securing safety and certification which are essential for commercialization and urban operation. So far, there is no e-VTOL aircraft that has received type certificate and standard airworthiness certificate due to the technical problems and safety requirement differences with conventional aircraft. The e-VTOL aircraft certification should also meet the equivalent level of safety required by the current airworthiness standards, but there are existing problems in securing safety and meeting current standards. In this study, the e-VTOL's certification problems and technical limitations in satisfying the current standards are presented.

• 한국항공운항학회:학술대회논문집
• /
• 2016.05a
• /
• pp.117-124
• /
• 2016

현행 국내 항공안전감독 업무 및 시스템의 인허가 AOC(Air Operator Certificate) 관련 정보 확인 기능 부재, 연 월간 감독계획 간의 연계성 취약, 점검 데이터 활용 통계 및 분석 기반 취약, 점검 및 인허가 대상별 인허가 점검 관련 데이터 관리 기반 미흡, 제한적 시스템 기능 구현에 따른 상당 업무기능의 수작업 문서처리 등의 한계점을 파악하고 이를 개선하기 위한 대안으로 위험관리(Risk Management) 기법을 활용한 항공안전감독 업무절차 및 현행 운영 시스템의 개선모형을 도출하고 이를 적용한 운영체계의 구현 방향성을 제시하고자 한다.