• 제목/요약/키워드: air break

검색결과 177건 처리시간 0.024초

사무실 실내공기질과 콘택트렌즈 착용여부가 안구 건조증에 미치는 영향 (The Influence of Office Indoor Air Qualitys on the Dry Eye Symptom of Contact Lens Wearers)

  • 김대종;박문찬;이세훈;김현욱;이화자;차정원
    • 한국안광학회지
    • /
    • 제17권2호
    • /
    • pp.215-222
    • /
    • 2012
  • 목적: 본 연구는 콘택트렌즈 착용 여부와 사무실 실내공기질이 안구건조에 미치는 영향이 있는지 파악하고자 하였다. 방법: 71명의 연구 대상자들의 각 사무실에서 실내공기질이 안구건조에 미치는 영향을 파악하기 위하여 이산화탄소($CO_2$), 온도(temperature), 습도(relative humidity), 총 부유분진(TSP), 미세먼지($PM_{10}$), 포름알데히드(HCHO)를 측정분석 하였고, 안구 건조증을 확인하기 위하여 연구 대상자들의 사무실에서 McMonnies dry eye symptom questionnaire, Schirmer Tear Test-I(S.T.T-I), Schirmer Tear Test-II with anesthetics(S.T.T-II), Tear film break-up time(T.B.U.T) 등을 검사 하였다. 결과: 콘택트렌즈 착용여부에 따라 사무실 실내공기질이 안구건조증에 영향을 미치는 요인으로는 TSP는 $200{\mu}g/m^3$, $PM_{10}$$86.7{\mu}g/m^3$, 포름알데히드는 $0.4{\sim}1.0{\mu}g/m^3$을 기준으로 농도가 높게 측정되었을 때 유의한 관련성이 있는 것으로 분석되었다. 그러나 $CO_2$(p=0.146), 온도(p=0.074)와 습도(p=0.053)는 통계적으로 안구건조와 유의한 관련성이 없는 것으로 분석되었다. 결론: 사무실 재실자의 안구 건조에 $CO_2$ 및 온도, 습도는 유의한 영향이 없었으나, TSP, $PM_{10}$, 포름알데히드의 실내 농도와 콘택트렌즈의 착용여부는 관련이 있었다. 콘택트렌즈 착용에 대한 종합적인 관리와 사무실 실내공기의 개별적인 평가가 함께 이루어져야 하겠다.

대기환경영향평가를 위한 대구광역시 상인동 달비골의 봄철 기상관측 사례분석 (A Case Study on the Meteorological Observation in Spring for the Atmospheric Environment Impact Assessment at Sangin-dong Dalbi Valley, Daegu)

  • 박종길;정우식;황수진;윤일희;박길운;김신호;김석철
    • 한국환경과학회지
    • /
    • 제17권9호
    • /
    • pp.1053-1068
    • /
    • 2008
  • This study aims to produce fundamental database for Environment Impact Assessment by monitoring vertical structure of the atmosphere due to the mountain valley wind in spring season. For this, we observed surface and upper meteorological elements in Sangin-dong, Daegu using the rawinsonde and automatic weather system(AWS). In Sangin-dong, the weather condition was largely affected by mountains when compared to city center. The air temperature was low during the night time and day break, and similar to that of city center during the day time. Relative humidity also showed similar trend; high during the night time and day break and similar to that of city center during the day time. Solar radiation was higher than the city, and the daily maximum temperature was observed later than the city. The synoptic wind during the measurement period was west wind. But during the day time, the west wind was joined by the prevailing wind to become stronger than the night time. During the night time and daybreak, the impact of mountain wind lowered the overall temperature, showing strong geographical influence. The vertical structure of the atmosphere in Dalbi valley, Sangin-dong had a sharp change in air temperature, relative humidity, potential temperature and equivalent potential temperature when measured at the upper part of the mixing layer height. The mixing depth was formed at maximum 1896m above the ground, and in the night time, the inversion layer was formed by radiational cooling and cold mountain wind.

와권(渦卷) 노즐의 무화기구(霧化機構)에 관(關)한 연구(硏究) (A Study on the Atomizing Mechanism for the Swirl Nozzle)

  • 이상우;판정순;석원앙
    • 농업과학연구
    • /
    • 제14권1호
    • /
    • pp.81-97
    • /
    • 1987
  • 병충해방제(病蟲害防除)에 있어서 효율적(效率的)인 분무립자(噴霧粒子)의 크기는 $20{\mu}m$ 이내(以內)이지만 비산(飛散)의 해(害)를 감안하여 $140{\sim}200{\mu}m$를 추천하고 있다. 그러나 우리나라 수도방제기(水稻防除機)의 주종(主種)인 총포노즐의 경우 입자(粒子)크기는 $220{\sim}750{\mu}m$로 과대(過大)한 실정(實情)이다. 우리나라에서 널리 이용(利用)되고 있는 과권(過卷) 노즐의 구조(構造)를 Figure 2와 같이 고안(考案)하여 공기(空氣)를 혼합(混合)시킨 약액(藥液)을 이용(利用)함으로써 과실내(過室內)에서의 예비무화효과(豫備霧化效果), 약액(藥液)의 감소된 표면장력(表面張力) 및 점주(粘住), 분사액(噴射液)의 증가된 주파수(周波數)의 효과(效果)를 이용(利用)하여 분무립자(噴霧粒子)를 개선(改善)하고저 실시(實施)된 실험결과(實驗結果)는 다음과 같다. 분무립자(噴霧粒子) 크기는 분무압력(噴霧壓力)(본(本) 실험(實驗)에서는 $0.70kg/cm^2$부터 $6.33kg/cm^2$까지 실시(實施)) 이 증가(增加)됨에 따라서 점차로 미립화(微粒化)되었고 이 경향(傾向)은 표준(標準)노즐의 결과(結果)와 같다. 동일(同一)한 분무압력하(噴霧壓力下)에서 분무립자(噴霧粒子)의 크기 및 분포상태(分布狀態)를 표준(標準)노즐의 비교(比較)할 때 체적평균직경(體積平均直徑)이 작아졌고 입자(粒子)크기 분포(分布)도 개선(改善)되었다. 입자(粒子)크기 분포(分布)는 분무형(噴霧型)의 중심(中心)으로부터 외측(外側)으로 향(向)하면 체적평균직경(體積平均直徑)이 작아지는 현상(現象)이었다.

  • PDF

CA저장 중 방울토마토의 품질특성 변화 (Changes of Quality Characteristics on the Cherry Tomatoes during the CA(Controlled Atmosphere) Storage)

  • 이현동;윤홍선;최종욱
    • 한국식품저장유통학회지
    • /
    • 제8권3호
    • /
    • pp.239-245
    • /
    • 2001
  • 방울 토마토의 환경기체조절 저장 중 품질특성을 측정하기 위하여 대조구인 air 저장구를 포함하여 7개의 저장조건에서 저장실험을 수행하였다. 저장기간 중 방울 토마토의 중량 감소율은 저장기간이 경과함에 따라 감소하였다. CA 저장구에서는 초기 중량의 90%를 유지하였으나, air 저장구에서는 초기중량의 85%를 유지하는 것으로 나타났다. 저장 중 적정 산도의 변화는 저장 기간이 경과함에 따라 계속적으로 감소하는 경향이었다. air 저장구와 6.4% $O_2$ + 4.2% $CO_2$ 저장구에서 다른 CA 저장구보다 적정산도 및 가용성 고형물 함량의 감소가 크게 나타났다. 4% $O_2$ +6% $CO_2$와 3% $O_2$ + 8.9% $CO_2$저장구의 적정산도 및 가용성 고형물 함량이 높게 나타났다. Lycopene 함량의 변화는 1% $O_2$ +6% $CO_2$와 3% $O_2$ + 3.1% $CO_2$저장구에서 변화가 가장 작은 것으로 나타났으며, 다른 저장구에서는 저장기간이 경과함에 따라 계속적으로 증가하였다. 방울토마토의 CA 저장 중 과육 경도의 변화는 저장기간이 경과됨에 따라 감소하는 경향을 나타내었다. 방울 토마토의 유기산 함량의 변화는 산소농도 3% 이하 CA저장구와 air 저장구에서 magic acid의 소실이 관찰되었다. 저장 중 과육내 에탄을 함량의 변화는 1% $O_2$ + 6% $CO_2$저장구에서는 저장 20일째 에탄올 함량이 다른 CA저장구의 10배 이상으로 증가하였다 6% $O_2$ + 7.8% $CO_2$저장구와 air 저장구의 에탄을 함량이 가장 낮은 것으로 나타났다. 저장 토마토의 관능검사 결과 air 저장구와 6.4% $O_2$ + 7.8% $CO_2$ 조건에서 저장한 토마토의 점수가 가장 좋은 것으로 나타났다. 1% $O_2$ + 6% $CO_2$조건에서 저장한 토마토의 경우 가식하기 곤란한 상태였다. 4% $O_2$ + 6% $CO_2$에서 저장한 토마토는 관능 검사에서 두 번째로 높은 점수를 받았으며, 산소농도 4%미만에서 저장한 토마토의 경우 기호도가 낮은 것으로 나타났다. 4% $O_2$ + 6% $CO_2$ 조건에서 저장한 시료의 경우 성숙이 억제되었으며, 저장 품질 분석실험결과 저장품질이 우수한 것으로 나타났다. 관능검사에서 대조구에 비해 낮은 점수를 받았으나, 이는 시료의 성숙도가 다른데 기인하는 것으로 분석되었다. 이상의 모든결과를 분석해 볼 때 환경기체조절저장은 방울토마토의 성숙 억제 및 저장품질유지에 효과가 있는 것으로 나타났다. 환경기체조성은 일반토마토의 저장조건보다 이산화탄소농도가 다소 높은 산소농도 3%~5% 이산화탄소 농도 5~8%에서 저장하는 것이 효과적일 것으로 판단되었다.

  • PDF

Office Environment and Musculoskeletal Complaints of Office Workers

  • Park, Myoung Hwan;Lee, Sangbok;Jeong, Byung Yong
    • 대한인간공학회지
    • /
    • 제34권6호
    • /
    • pp.609-622
    • /
    • 2015
  • Objective: This study aims to investigate the correlation between office and work environment satisfaction levels and workers' musculoskeletal symptoms by conducting surveys asking office workers to state their musculoskeletal symptoms and office and work environment satisfaction levels. Background: The increased number of office workers and their indoor work hours using computers have led to new understandings of the importance of office environment including its temperature, humidity, noise levels, lighting and quality of air, and work environment including monitor arrangement, space arrangement and the functions of desks and chairs. Method: Specific details on office work, office environment satisfaction levels, work environment satisfaction levels, musculoskeletal symptoms, absence from work and treatment due to musculoskeletal related symptoms were analyzed based on the survey answers given by 397 office workers who were the subjects of this research. Results: Office workers showed different characteristics of musculoskeletal symptoms depending on their gender, age, work experience, office hours, break time and time spent on computers. Also, differences in symptoms were found for workers'with different satisfaction levels for office environment (temperature, humidity, noise levels, quality of air, lighting) and work environment (location of monitors, area and display of office space, chairs and desks). ANOVA shows the differences between groups of subjects classified by the experience of work-absences and treatments or pain complaints. Conclusion and Application: Relationship between workers' satisfaction levels with the office and work environment and their musculoskeletal symptoms is expected to be served as essential data for systematic management of the workplace.

초미세입자 제거를 위한 고온용 나노 세라믹 필터 개발 (Development of Nano Ceramic Filter for the Removal of Ultra Fine Particles)

  • 김종원;안영철;이병권;정현재
    • 설비공학논문집
    • /
    • 제22권1호
    • /
    • pp.13-20
    • /
    • 2010
  • Airborne particulate matters have two modes of size distributions of coarse mode and fine mode. The coarse mode which is formed by break down mechanism of large particles has a peak around the $100\;{\mu}m$, and the fine mode formed by condensation and build up mechanism of evaporated vapors has a peak at several ${\mu}m$. The coarse mode particles can be removed easily by conventional collecting equipments such as a cyclone, an electrostatic precipitator, and a filter, however the fine mode particles can not be collected easily. Usually the fine mode particles are generated in the high temperature conditions especially through boilers and incinerators, so the high efficient and temperature filter is essential for the filtration. In this study, a nano ceramic filter for the removal of fine particles in the high temperature is developed and tested for several characteristics. The nano ceramic filter has double layer of micro and nano structure and the pressure drop and the filtration efficiency for $0.31\;{\mu}m$ at 3 cm/s are 15.45 mmAq, and 96.75%, respectively. The thermal conductivity is $0.038\;W/m{\cdot}K$, and the coefficient of water vapor permeability is $3.63\;g/m^2{\cdot}h{\cdot}mmHg$. It is considered that the sensible heat exchange rate is very poor because the low thermal conductivity but it has high potential to exchange latent heat.

BNR 하수처리시스템에서 효과적 고형물 분리를 위한 DAF 공정의 적용과 처리특성 (Treatment Characteristics and Application of DAF Process for Effective Solid Separation in BNR Municipal Wastewater Treatment System)

  • 곽동희;유대환
    • 상하수도학회지
    • /
    • 제24권3호
    • /
    • pp.267-276
    • /
    • 2010
  • Many plants have been improved to adapt the target of the biological treatment processes changed from organics to nutrients since the water quality criteria of effluent was reinforced and included T-N and T-P for the municipal wastewater treatment plant. To meet the criteria of T-N and T-P, the conventional biological reactor such as aeration tank in activated sludge system is changed to the BNR (biological nutrient removal) processes, which are typically divided into three units as anaerobic, anoxic and oxic tank. Therefore, the solid separation process should be redesigned to fit the BNR processes in case of the application of the DAF (dissolved air flotation) process as an alternatives because the solid-liquid separation characteristics of microbial flocs produced in the BNR processes are also different from that of activated sludge system as well. The results of this study revealed that the microbial floc of the anaerobic tank was the hardest to be separated among the three steps of the unit tanks for the BNR processes. On the contrary, the oxic tank was best for the removal efficiency of nutrients as well as suspended solid. In addition, the removal efficiency of nutrients was much improved under the chemical coagulation treatment though coagulation was not indispensable with a respect to the solid separation. On the other hand, in spited that the separation time for the microbial floc from the BNR processes were similar to the typical particles like clay flocs, over $2.32{\times}10^3$ ppm of air volume concentration was required to keep back the break-up of the bubble-floc agglomerates.

KZ 필터를 이용한 부산지역 PM10의 장기 추세 분석 (Analysis of the Long-term Trend of PM10 Using KZ Filter in Busan, Korea)

  • 도우곤;정우식
    • 한국환경과학회지
    • /
    • 제26권2호
    • /
    • pp.221-230
    • /
    • 2017
  • To determine the effect of air pollution reduction policies, the long-term trend of air pollutants should be analyzed. Kolmogorov-Zurbenko (KZ) filter is a low-pass filter, produced through repeated iterations of a moving average to separate each variable into its temporal components. The moving average for a KZ(m, p) filter is calculated by a filter with window length m and p iterations. The output of the first pass subsequently becomes the input for the next pass. Adjusting the window length and the number of iterations makes it possible to control the filtering of different scales of motion. To break down the daily mean $PM_{10}$ into individual time components, we assume that the original time series comprises of a long-term trend, seasonal variation, and a short-term component. The short-term component is attributable to weather and short-term fluctuations in precursor emissions, while the seasonal component is a result of changes in the solar angle. The long-term trend results from changes in overall emissions, pollutant transport, climate, policy and/or economics. The long-term trend of the daily mean $PM_{10}$ decreased sharply from $59.6ug/m^3$ in 2002 to $44.6ug/m^3$ in 2015. This suggests that there was a long-term downward trend since 2005. The difference between the unadjusted and meteorologically adjusted long-term $PM_{10}$ is small. Therefore, we can conclude that $PM_{10}$ is unaffected by the meteorological variables (total insolation, daily mean temperature, daily mean relative humidity, daily mean wind speed, and daily mean local atmospheric pressure) in Busan.

열전달 촉진관에서 HFC32/HFC152a 혼합냉매의 외부 응축열전달계수 (External Condensation Heat Transfer Coefficients of HFC32/HFC152a Mixtures on Enhanced Tubes)

  • 이요한;강동규;김현주;이호생;정동수
    • 설비공학논문집
    • /
    • 제26권7호
    • /
    • pp.315-321
    • /
    • 2014
  • In this study, external condensation heat transfer coefficients (HTCs) of two non-azeotropic refrigerant mixtures of HFC32/HFC152a at various compositions were measured on both 26 fpi low-fin and Turbo-C enhanced tubes, of 19.0 mm outside diameter. All data were taken at the vapor temperature of $39^{\circ}C$, with a wall subcooling of 3~8 K. Test results showed that the HTCs of the tested mixtures on the enhanced tubes were much lower than the ideal values calculated by mass fraction weighting of the pure component HTCs. Also, the reduction of HTCs due to the diffusion vapor film was much larger than that of a plain tube. Unlike HTCs of pure fluids, HTCs of the mixtures measured on enhanced tubes increased, as the wall subcooling increased, which was due to the sudden break-up of the vapor diffusion film with an increase in wall subcooling. Finally, the heat transfer enhancement ratios for mixtures were found to be much lower, than those of pure fluids.

정밀질량분석기를 활용한 우레탄폼의 장기열전도도 예측을 위한 분석기법 (Long-Term Thermal Conductivity Prediction of Polyurethane Foam Applying Precision Mass Spectrometer for Cell Gas Analysis)

  • 김진석;전종한;이진복;이효진
    • 설비공학논문집
    • /
    • 제22권10호
    • /
    • pp.679-686
    • /
    • 2010
  • A proprietary device is adopted to break out the membrane of cell in the rigid polyurethane foam. As it is known, the membrane of cell is hardly tearing-off thoroughly in a mechanical way due to both its elastic characteristic and micro sized pores. In this study, a novel experimental approach is introduced to burst out all gases inside the cells of the rigid polyurethane foam by abrasively grinding micro-cells completely into fine powder. The biggest advantage of this approach is to be capable of releasing all gases out from the cell even in the micro pores. As clearly reflected from the repeatability, the accuracy of the result is highly improved and high confidence in the data sets as well. For the measurements of not only gas composition but partial pressure for each gas simultaneously as well, a precision gas mass spectrometer is used in-line directly to the abrasive grinding device. To control the starting point of the polyurethane foam, all samples were prepared on site in the laboratory. Manufactured time is one of the most critical factors in characterization of cell gas composition because it is known that one of gas composition, especially, carbon dioxide, is diffused out dramatically in a short period of time as soon as it is foamed.