• Korean Journal of Soil Science and Fertilizer
• /
• v.19 no.3
• /
• pp.211-216
• /
• 1986

To establish a suitability grouping system of paddy soils for double or multiple cropping with rice which is intensively practiced in the southern parts of Korea, a few basic experiments were carried out for two years. The results are summarized as follows; 1. The potential productivities of the paddy soils which were tested without any fertilizer in the pots of subsoil samples by the double cropping of rice and other upland crops were resulted that the soils of "Moderately well drained" fine silty textured were the highest while the soils of "Poorly drained" sandy were the lowest, and the productivities could be clearly comparable according to the differences of soil conditions. 2. The decomposability of organic matter also was higher in the soils of "Moderately well drained" than the "Imperfectly drained". The coarse loamy and coarse silty textured soils were high in the upland condition and in the early stages of submerging while the fine loamy and fine silty textured soils were high at the late stage of submerging in the rates of organic matter decomposition. 3. The days to be reached to tillable condition after rainfall in fine loamy textured soils were about 5 days earlier than the clayey soils. The period of tillable condition of fine clayey soils with "Moderately well drained" was the longest and that of the fine loamy textured soils was the shortest. But the soils with "Imperfectly drained" were not clear among soil textural classes. 4. The lower the ground water table the higher was the productivity indices. The variation of ground water table in the medium textured soils was higher than the both of coarse and fine textured soils among "Moderately well drained". But it was observed the opposite in the soils of "Imperfectly drained".

• Journal of Biosystems Engineering
• /
• v.26 no.3
• /
• pp.209-220
• /
• 2001

This study was carried out to investigate the usability of the used frying oil, which was extracted from soybean, as one of the alternative fuel of a small diesel engine. For the experiment, NO. 2 diesel oil [D], used frying oil [UF], and their volumetric blends were applied and analysis of the properties and compositions of the experimental fuels were conducted. A four cycle diesel engine with single cylinder, water cooling system, maximum output 8.1 ㎾/2,200 rpm was selected and a direct injection chamber and a precombustion chamber were attached alternately. The results obtained were as follows: 1. Engine power (BHP) were increased from 4.13~4.27㎾ to 9.08~9.15㎾ for diesel oil, from 4.05~4.19㎾ to 8.44~8.92㎾ for UF, and from 4.01~4.48㎾ to 8.69~9.16㎾ for blend fuel, as the engine speed increased from 1,000 rpm to 2,200 rpm. The BHP in case of the direct combustion chamber were fluctuated higher than those of the pre-combustion chamber. 2. With the engine speed increased, torque of the engine were increased from 39.50~40.80 N.m to 42.89 N.m, then decreased to 39.44~39.77 N.m for diesel oil, and increased from 38.73~40.04 N.m to 40.12~40.82 N.m then decreased as 36.53~38.76 N.m for UF. Torque of the blend fuels were increased from 38.75~41.76 N.m to 40.47~42.89 N.m then decreased to 37.73~39.78 N.m. There is no significant difference of torque between the type of combustion chambers. 3. The specific fuel consumption of the UF was increased about 20 percent depending on the engine speed variations. And in case of direct injection chamber, about 12 percent lower fuel consumption was observed than that of precombustion chamber. 4. NOx emission of the UF was higher than that of diesel oil at above 1,800rpm of the engine speed. In case of the direct injection chamber, NOx emission was revealed higher about 59 percent than that of the precombustion chamber, depending on the range of the engine speeds. 5. Smoke emission was decreased in case of UF compared with diesel oil on direct injection chamber. When using precombustion chamber smoke emission was a little higher than that of the direct injection chamber were showed at the engine speed range. 6. At all the engine speed range, exhaust gas temperatures were decreased 2~3$^{\circ}C$ for UF used engine compared with those of the diesel oil. The exhaust gas temperature of the direct injection chamber was higher than that of the precombustion chamber by 72$^{\circ}C$. 7. Unburnt materials remained in the cylinder in case of the pre-combustion chamber was smaller and softer than that of the direct combustion chamber. 8. The feasibility of the blend fuel B-1 and B-2 were verified as a direct combustion chamber was attached to the diesel engine, with respect to the power performance of the engine.

• Korean Journal of Environmental Agriculture
• /
• v.13 no.2
• /
• pp.183-190
• /
• 1994

To assess the effects of plant stress by light, temperature, NaCl and soil moisture on photosynthetic activity, the fluorescence method was used for Chinese cabbage(Brassica perkinensis Rupr.), strawberry(Fragaria grandiflora Ehrh.) and citrus tree(Citrus unshiu Marc.). With decreasing the light intensity, Fv/Fm ratios of intact leaves of Chinese cabbage and strawberry increased significantly, indicating lower photochemical efficiency in PS II system, resulting in an inverse relationship with the photosynthetic activity. Chinese cabbage and strawberry that were grown at higher temperature had higher Fv/Fm ratios and photosynthetic activities, while those given high concentration of NaCl and having low soil moisture had lower values. Chinese cabbage more resistant to salt stress and requiring more water had a greater Fv/Fm ratio than strawberry. In citrus tree, Fv/Fm ratio was lower in the non-irrigated group than the irrigated one. From these results, the fluorescence method was found to be a useful tool which can be used to assess the degree of in vivo stress induced by various environmental factors.

• Journal of Mushroom
• /
• v.10 no.1
• /
• pp.15-20
• /
• 2012

Ventilation effects of bottles($1,100m{\ell}$) for culturing Flammulina velutipes on its mycelial growth and mushroom production were investigated. The degree of ventilation were controlled with hole positions, upper and under, and hole sizes in the bottle lids. The ventilation effects were measured with the contents of carbon dioxide, free sugars, chitin, moisture in the bottles and with the amount of produced mushrooms from the bottles. Carbon dioxide concentrations within the culturing bottles at exponential mycelial growth period vertex were relatively high in the bottles with lids without both a sponge and an aeration hole, and in those with a smaller hole. Free sugar contents in the mycelia were the highest in those with a 47mm hole on both sides, and in those with 26~33mm holes only underside. Chitin content was the highest in those with a 26mm hole only underside. On the other hand, the lids with 42mm~47mm holes on the both sides greatly lost water and decreased the mushroom production. In conclusion, the most efficient ventilation hole sizes on the lids for bottle($1,100m{\ell}$) cultivation of Flammulina velutipes using $1,100m{\ell}$ polypropylene bottle were 19mm on both sides of the lid and 26mm on only underside. They produced more mushrooms than the control by 6~9 %.

• Journal of Cadastre & Land InformatiX
• /
• v.47 no.2
• /
• pp.79-90
• /
• 2017

Urban environment represent one of the most dynamic regions on earth. As in other countries, forests, green areas, agricultural lands are rapidly changing into residential or industrial areas in South Korea. Monitoring such rapid changes in land use requires rapid data acquisition, and satellite imagery can be an effective method to this demand. In general, SAR(Synthetic Aperture Radar) satellites acquire images with an active system, so the brightness of the image is determined by the surface roughness. Therefore, the water areas appears dark due to low reflection intensity, In the residential area where the artificial structures are distributed, the brightness value is higher than other areas due to the strong reflection intensity. If we use these characteristics of SAR images, settlement areas can be extracted efficiently. In this study, extraction of settlement areas was performed using TerraSAR-X of German high-resolution X-band SAR satellite and KOMPSAT-5 of South Korea, and object-oriented image classification method using the image segmentation technique is applied for extraction. In addition, to improve the accuracy of image segmentation, the speckle divergence was first calculated to adjust the reflection intensity of settlement areas. In order to evaluate the accuracy of the two satellite images, settlement areas are classified by applying a pixel-based K-means image classification method. As a result, in the case of TerraSAR-X, the accuracy of the object-oriented image classification technique was 88.5%, that of the pixel-based image classification was 75.9%, and that of KOMPSAT-5 was 87.3% and 74.4%, respectively.

• Journal of agricultural medicine and community health
• /
• v.25 no.1
• /
• pp.1-9
• /
• 2000

A public perception survey of environmental health due to small-scale industries was conducted in Sudong Myun, Namyangju City, Kyungki Do, recently being changed to industrialized rural community. This survey had the purpose to ascertain public interest, to identify public needs, and to assess participation for environmental health programs of rural community. The results of survey were as follows: 1. The rate of the respondents with factory worker 19.4% and half(53.1%) of respondents had lived nearby the factory. 2. Some respondents were not favor their neighboring factories(30.1%) and have discussed about its environmental problems in community meeting(14.4%) especially in neighborhood adjacent factories. 3. The respondents have perceived that: (1) major problems were water contamination, air pollution, nasty odor, dust, and noise (2) health problems were more serious in employees than in other residents (3) the employers were responsible for environmental problems (4) the health service should provided by public health center channel and participated by the residents (5) most important service for workers was improvement of working conditions. We hope the community environmental and/or occupational health delivery system for the employees and residents will be developed true public health center channel in a rural community on the basis of this result.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.2
• /
• pp.245-261
• /
• 2019

Radioactive contaminant from a nuclear facility moves to the ecosystem by run-off or groundwater flow. Among the two mechanisms, contaminant plume through a river can be easily detected through a surface water monitoring system, but radioactive contaminant transport in groundwater is difficult to monitor because of lack of information on flow path. To understand the contaminant flow in groundwater, understanding of the geo-environment is needed. We suggest a method to decide on monitoring location and points around an imaginary nuclear facility by using the results of site characterization in the study area. To decide the location of a monitoring well, groundwater flow modeling around the study area was conducted. The results show that, taking account of groundwater flow direction, the monitoring well should be located at the downstream area. Also, monitoring sections in the monitoring well were selected, points at which groundwater moves fast through the flow path. The method suggested in the study will be widely used to detect potential groundwater contamination in the field of oil storage caverns, pollution by agricultural use, as well as nuclear use facilities including nuclear power plants.

• Korean Journal of Remote Sensing
• /
• v.36 no.6_1
• /
• pp.1277-1290
• /
• 2020

Water resources which is formed of surface and groundwater, are considered as one of the pivotal natural resources worldwide. Since last century, the rapid population growth as well as accelerated industrialization and explosive urbanization lead to boost demand for groundwater for domestic, industrial and agricultural use. In fact, better management of groundwater can play crucial role in sustainable development; therefore, determining accurate location of groundwater based groundwater potential mapping is indispensable. In recent years, integration of machine learning techniques, Geographical Information System (GIS) and Remote Sensing (RS) are popular and effective methods employed for groundwater potential mapping. For determining the status of the integrated approach, a systematic review of 94 directly relevant papers were carried out over the six previous years (2015-2020). According to the literature review, the number of studies published annually increased rapidly over time. The total study area spanned 15 countries, and 85.1% of studies focused on Iran, India, China, South Korea, and Iraq. 20 variables were found to be frequently involved in groundwater potential investigations, of which 9 factors are almost always present namely slope, lithology (geology), land use/land cover (LU/LC), drainage/river density, altitude (elevation), topographic wetness index (TWI), distance from river, rainfall, and aspect. The data integration was carried random forest, support vector machine and boost regression tree among the machine learning techniques. Our study shows that for optimal results, groundwater mapping must be used as a tool to complement field work, rather than a low-cost substitute. Consequently, more study should be conducted to enhance the generalization and precision of groundwater potential map.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.11 no.1
• /
• pp.1534-1548
• /
• 1969

This experiment was conducted, making use of the 'NONG-RIM6' arecommended variety of rice for the year of 1968. Main purposes of the experiment are to explore possibilities of; a) ways and means of saving irringation water and, b) overcoming drought at the same time so that an increased yield in rice could be resulted in. Specifically, it was tried to determine the effects of the Rotation irrigation method combined with differentiated thickness of lining upon the growth and yield of rice. Some of the major findings are summarized in the following. 1) The different thicknesses show a significant relationship with the weight of 1,000 grains. In the case of 9cm lined plot, the grain weight is 23.5grams, the heaviest. Next in order is 3cm lined plot, 6cm lined plot, control plot, and wheat straw lined-plot. 2) In rice yield, it is found that there is a considerably moderate significant relationship with both the different thickness of lining and the number of irrigation, as shown in the table. 3) There is little or no difference among different plots in terms of a) physical and chemical properties of soil, b) quality of irrigation water, c) climatic conditions, and rainfalls. 4) It is found that there is a significant relationship between differences in the method of rotation irrigation and the number of ears per hill. The plot irrigated at an interval of 7 days shows 17.4 ears and plot irrigated at an interval of 6 days, 16.3 5) In vinyl-treated plots, it is shown that both yield and component elements are greatest in the case of the plot ith whole of $3cm/m^2$ Next in order are the plot with a hole of $2cm/m^2$ the plot with a hole of $1cm/m^2$ In the case of the plot with no hole it is found that both yield and component elements are decreased as compared to the control plot. 6) The irrigation water reqirement is measured for the actual irrigation days of 72 which are the number subtracted the days of rainfall of 30 from the total irrigation days of 102. It is found that the irrigation water requirement for the uncontrol plot is 1,590mm as compared to 876mm(44.9% saved) for the 9cm-lined plot, 959mm(39.7% saved) for the 6cm-lined plot 1,010mm(36% saved) for the 3cm-lined plot and 1,082mm(32% saved) for the wheat straw lined plot. In the case of the Rotation irrigation method it is found that the water requirement for the plot irrigated at an interval of 8 days is 538mm(65% saved), as compared to 617mm(61.6% saved) for plot irrigated at an interval of 7 day 672mm(57.7% saved) for plot irrigated at an interval of 6day, 746mm(53.0% saved) for the plot irrigated at an interval of 5 days, 890mm 44.0% saved) for the plot irrigated at an interval of 4 days, and 975mm(38.6% saved) for the plot irrigated at an interval of 3 days. 7) The rate of evapotranspiration is found 2.8 around the end of month of July, as compared to 2.6 at the begining of August 3.4 around the end of August and 2.6 at the begining of August 3.4 around the end of August and 2.6 at the begining of September. 8) It is found that the saturation quantity of 30mm per day is decreased to 20mm per day though the use of vinyl covering. 9) The husking rate shows 75 per cent which is considered better.

• Korean Journal of Food Science and Technology
• /
• v.43 no.2
• /
• pp.243-248
• /
• 2011

The prevalence and distribution of hazardous microorganisms were investigated from the major perilla cultivation area at Milyang, Gyeongnam province, Korea. Aerobic plate count (APC) and coliform count of perilla leaves were 4.82 log CFU/g and 3.85 log CFU/g, respectively. E. coli, S. aureus and B. cereus were detected in 3.0% (4/114), 7.9% (9/114) and 46.5% (53/114) of examined perilla leaves. However, E. coli O157:H7, Salmonella spp, and L. monocytogenes were not detected. The distribution of hazardous microorganisms in perilla leaf cultivation environment were compared and the concentration of APC and coliform counts were more than 3.0 log CFU/(mL, g, $100cm^2$, hand) from most of the samples. S. aureus were detected from irrigation water, packing table, packing vinyl, hand, and clothes. Also, B. cereus was frequently detected from the examined samples. Especially, packing table and collection container were contaminated with maximum 5.5 log $CFU/100cm^2$ of B. cereus. Good Agricultural Practice (GAP) system should be introduced to farms to enhance the safety of perilla leaves.