• 한국경제지리학회지
• /
• 제7권2호
• /
• pp.283-296
• /
• 2004

본 연구는 수도권 농촌지역인 여주 지역의 토지이용 변화, 생활실태의 변화, 생활공간의 입지변화를 살펴 급격하게 변화하고 있는 생활공간의 지역성을 규명하였다. 여주 지역의 토지이용은 농촌 토지이용의 감소와 도시적 토지이용의 완만한 증가를 보인다. 완만한 속도의 도시화를 나타내는 기능으로서 관광농업이 나타나고 농외 겸업 활동이 비교적 활성화되고 있다. 여주지역 육로교통(고속도로통과)의 발달은 생활공간상의 입지이동에 큰 영향을 주었다. 수도권 외곽의 농촌이던 이곳은 도시화가 더딘 곳이었지만, 곧 전철 등의 개통 등 교통의 발달과 함께 도시화가 가속화될 지역이라 할 수 있다. 치밀한 도시계획이 수행될 때, 쾌적한 도시 주거환경 지역으로 변모할 것이 예상된다.

• 한국지역지리학회지
• /
• 제3권1호
• /
• pp.99-113
• /
• 1997

본 연구는 영농을 목적으로 도시에서 농촌으로 거주지를 이동하는 귀향농가의 발생이유와 그들의 적응과정을 미시적 사례분석을 통해 밝히고자 하였다. 1980년대 이전의 귀향농가 발생은 가족 부양이나 도시적응실패 등의 사회적 원인이었지만 최근의 귀향농가 발생은 재배작물의 수익성을 고려한 경제적 원인이 더 크게 작용된 결과이다. 귀향농가의 발생유형은 이촌 후 고향으로 귀농하는 경우가 많지만 직접적인 영농경험이 없는 도시거주자가 수익성을 고려한 특정작물의 재배를 목적으로 귀농하기도 한다. 특히 최근의 귀향농가는 농업경영형태에 있어서 소유농지가 전혀없이 순수 임차에 의해 발생되기도 하며 농지의 매입보다 임차지의 확대를 통해 경영규모를 확대하고 있다. 그런점에서 귀향농가의 증가는 산업화 이후 노동력부족에 따른 농촌의 경지이응을 저하를 완화시키는 방안이 될 수 있다. 현재까지는 귀향농가의 비중이 미약한 것이 사실이지만 최근들어 증가 추세에 있고 귀향하는 경영주가 젊은 연령층이므로 이들에 의한 파급효과는 기대해 볼 수 있다. 따라서 과소지역으로서의 농촌문제 해결을 위해서는 귀향농가를 위한 적극적인 대책이 모색되어야 하는데 이들의 성공적인 정착을 위해서는 자금지원이나 영농조건의 개선도 중요하지만 교육여건과 생활시설의 개선 등 하부구조의 확충이 무엇보다 절실하다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제31권12호
• /
• pp.1881-1889
• /
• 2018

Objective: In dryland areas of China, alfalfa hay (AH) is a possible substitute for concentrate feed for beef cattle. To evaluate the potential benefits of this substitution, we studied the effect of the ratio of AH intake to total dry matter (DM) intake on average daily body-weight gain (ADG), dietary energy utilization status, and economic benefit in Gansu province. Methods: In each of two feeding trials in 2016 (trial 1 [T1], July 3 to 17; trial 2 [T2], August 15 to September 23), crossbred male Simmental calves were allocated to low AH (LA), medium AH (MA), and high AH (HA) feeding groups (n = 4 per group). The target ADG was set as 1 kg for both trials. In a one-way-layout design based on conventional feeding practices in the province, calves received diets containing the different AH amounts, with a constant ratio of corn stover:total DM and decreasing rations of concentrate feed proportional to the increase in AH. Calves in T1 received AH at 15% (T1-LA), 23% (T1-MA), or 31% (T1-HA) of their dietary DM allowances; those in T2 received 9% (T2-LA), 24% (T2-MA), or 34% (T2-HA) AH. Results: Among the T1 groups, both ADG and economic benefit were highest in T1-LA; whereas in T2, they were higher in the T2-LA and T2-MA groups than in T2-HA. Energy digestibility did not significantly differ among the groups in either trial. The dietary AH inclusion ratios of 14% in the warm season and 8% to 21% in the cool season appeared to yield optimal ADG, metabolizable energy intake, and economic benefit. Conclusion: Low-level inclusion of AH, ranging from 8% to 21%, is a practical approach for beef cattle feeding. This modified feeding regimen likely will promote increased growth performance during the fattening stage of beef steers in dryland areas of Gansu province, China.

• Journal of Biosystems Engineering
• /
• 제4권1호
• /
• pp.1-23
• /
• 1979

The use of barley seeder attached to rotary tiller in the rural area has a significant meaning not only for the solution of labor peak season, but also for the increase of land utilization efficiency. The facts that presently being used barley seeders are all based on the mechanical principles of the reverse rotation, center drive and are all using forward rotating tine, which is used to be easily and heavily worn out when it rotates reversely, raise problem of recommending them to rural area in Korea. Therefore, the main objective of the study was to develop new type of rotary tine attachable to barley seeders. To attain the objective the following approaches were applied. (1) The kinematic analysis of reverse rotating barley seeders. (2) The studies on the soil bin and artificial soil. (3) The comparative experiment on the power requirement of prototype tine. The results obtained from the studies are summarized as follow: 1. The kinematic analysis of barley seeder attached to rotary tiller: The following results were obtained from the kinematic analysis for deriving general formulae of the motion and velocity characterizing the rotary tine of barley seeders presently being used by farmers. a) The position vector (P) of edge point (P) in the rotary tine of reverse rotating, center drive was obtained by the following formula. $$P=(vt+Rcos wt)i+Rsin wt j+ \{ Rcos \theta r sin \alpha cos (wt- \beta +\theta r) +Rsin \theta r sin \alpha sin (wt-\beta + \theta r) \} lk $$ b) The velocity of edge point $(P^')$ of reverse rotating, center drive rotary tine was obtained by the following formula. $$(P^')=(V-wR sin wt)i+(w\cdot Rcoswt)j + \{ -w\cdot Rcos \theta r\cdot sin \alpha \cdot sin (wt-\beta +\theta r) + w\cdot Rsin \theta r\cdot sin \alpha \cdot cos (wt- \beta + \theta r \} k $$ c) In order to reduce the power requirement of rotary tine, the angle between holder and edge point was desired to be reduced. d) In order to reduce the power requirement, the edge point of rotary tine should be moved from the angle at the begining of cutting to center line of machine, and the additional cutting width should be also reduced. 2. The studies on the soil bin and artificial soil: In order to measure the power requirement of various cutting tines under the same physical condition of soil, the indoor experiments Viere conducted by filling soil bin with artificially made soil similar to the common paddy soil and the results were as follows: a) When the rolling frequencies$(x)$ of the artificial soil were increased, the densIty$(Y)$ was also increased as follows: $$y=1.073200 +0.070780x - 0.002263x^2 (g/cm^3)$$ b) The absolute hardness $(Y)$ of soil had following relationship with the rolling frequencies$(x)$ and were increased as the rolling frequencies were increased. $$Y=37.74 - \frac {0.64 + 0.17x-0. 0054x^2} {(3.36-0.17x + 0.0054x^2)^3} (kg/cm^3)$$ c) The density of soil had significant effect on the cohesion and angle of internal friction of soil. For instance, the soil with density of 1.6 to 1.75 had equivalent density of sandy loam soil with 29.5% of natural soil moisture content. d) The coefficient of kinetiic friction of iron plate on artificial soil was 0.31 to 0.41 and was comparable with that of the natural soil. e) When the pulling speed of soil bin was the 2nd forward speed of power tiller, the rpm of driving shaft of rotary was similar to that of power tiller, soil bin apparatus is indicating the good indoor tester. 3. The comparative experiment on the power requirement of prototype tine of reverse rotating rotary: According to the preliminary test of rotary tine developed with various degrees of angle between holder and edge pcint due to the kinematic analysis, comparative test between prototype rotary tine with $30 ^\circ $ and $10 ^\circ$ of it and presently being used rotary tine was carried out 2nd the results were as follows: a) The total cutting torque was low when the angle between holder and edge point was reduced. b) $\theta r$ (angle between holder and edge point) of rotary tine seemed to be one: of the factors maximizing the increase of torque. c) As the angle between holder and edge point ($\theta r$) of rotary tine was $30 ^\circ $ rather than $45 ^\circ $, the angle of rotation during cutting soil was reduced and the total cutting torque was accordingly reduced about 10%, and the reduction efficiency of total cutting torque was low when the angle between holder and edge point ($\theta r$) of rotary tine was $10 ^\circ $, which indicates that the proper angle between holder and edge point of rotary tine should be larger than $10 ^\circ $ and smaller than $30 ^\circ $ . From above results, it could be concluded that the use of the prototype rotary tine which reduced the angle between holder and edge point to $30 ^\circ $, insted of $45 ^\circ $, is disirable not only decreasing the power requirements, but also increasing the durabie hour of it. Also forward researches are needed, WIlich determine the optimum tilted angle of rotary brocket, and rearrangement of the rotary tine on the rotary boss.