• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.5
• /
• pp.463-469
• /
• 1998

Factor analysis was applied as a multivariate statistical technique to official genetic evaluations of type classification traits for 1,265,785 Holstein cows and 10,321 sires computed from data collected between August 1982 and June 1994 in Canada. Type traits included eighteen linear descriptive traits and eight major score card traits. Principal components of the factor analysis showed that only five factors explain the information of the genetic value of linear descriptive traits for both cows and sires. Factor 1 included traits related to mammary system, like texture, median suspensory, fore attachment, fore teat placement and rear attachment height and width. Factor 2 described stature, size, chest width and pin width. These two factors had a similar pattern for both cows and sires. In constrast, Factor 3 for cows involved only bone-quality, while in addition for sires, Factor 3 included foot angle, rear legs desirability and legs set. Factor 4 for cows related to foot angle, set of rear leg and leg desirability, while Factor 4 related to loin strenth and pin setting for sires. Finally, Factor 5 included loin strength and pin setting for cows and described only pin setting for sires. Two factors only were required to describe score card traits of cows and sires. Factor 1 related to final score, feet and legs, udder traits, mammary system and dairy character, while frame/capacity and rump were described by Factor 2. Communality estimates which determine the proportion of variance of a type trait that is shared with other type traits via the common factor variant were high, the highest ${\geq}$ 80% for final score, stature, size and chest width. Pin width and pin desirability had the lowest communality, 56% and 37%. Results indicated shifts in emphasis over the twelve-year period away from udder traits and dairy character, and towards size, scale and width traits. A new system that computes fmal score from type components has been initiated.

• Journal of Sensor Science and Technology
• /
• v.11 no.2
• /
• pp.93-101
• /
• 2002

The quality of agricultural products is classified with various factors which are measured and determined by destructive and/or nondestructive method. NIR spectrum analysis method is used to determine internal qualities such as a brix and an acidity. CCD color camera is used to measure external quality like color and a size of fruit. Today, nondestructive methods are widely researched. The quality and the grade of fruit loaded into a cup automatically and measured in real time by camera and NIR system is determined by infernal and external factors. This paper proposes modified boundary tracking algorithm which detects the contour of fruit's color image and make chain code faster than conventional method. The chain code helps compute a size of fruit image and find multiple loading of a fruit in single cup or fruit between two cups. The designed classification system sorts a citrus at speed of 8 fruit/s, with evaluating a brix, an acidity and a size grade.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1397-1399
• /
• 2003

When and Where, What kind of agricultural products will be produced and provided for the market? It is a commercial requirement, and also an academic questions to remote sensing technology. Crop physiology analysis and growth monitoring are important elements for precision agriculture management. Remote sensing technology supplies us more selections and available spaces in this dynamic change study by producing images of different spatial, spectral and temporal resolutions. Especially, the hyperspectral remote sensing should do play a key role in crop growth investigation at national, regional and global scales. In the past five years, Chinese academy of sciences and Japan NTT-DATA have made great efforts to establish a prototype information service system to dynamically survey the vegetable planting situation in Nagano area of Japan mainly based on remote sensing data. For such concern, a flexible and light-duty flight system and some practical data processing system and some necessary background information should be rationally made together. In addition, some studies are also important, such as quick pre-processing for hyperspectral data, Multi-temporal vegetation index analysis, hyperspectral image classification in support of GIS data, etc. In this paper, several spectral data analysis models and a designed airborne platform are provided and discussed here.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.25 no.4
• /
• pp.258-266
• /
• 2023

This study analyzed methodologies for estimating carbon stocks of perennial woody crops and the research cases in overseas countries. As a result, we found that Australia, Bulgaria, Canada, and Japan are using the stock-difference method, while Austria, Denmark, and Germany are estimating the change in the carbon stock based on the gain-loss method. In some overseas countries, the researches were conducted on estimating the carbon stock change using image data as tier 3 phase beyond the research developing country-specific factors as tier 2 phase. In South Korea, convergence studies as the third stage were conducted in forestry field, but advanced research in the agricultural field is at the beginning stage. Based on these results, we suggest directions for the following four future researches: 1) securing national-specific factors related to emissions and removals in the agricultural field through the development of allometric equation and carbon conversion factors for perennial woody crops to improve the completeness of emission and removals statistics, 2) implementing policy studies on the cultivation area calculation refinement with fruit tree-biomass-based maturity, 3) developing a more advanced estimation technique for perennial woody crops in the agricultural sector using allometric equation and remote sensing techniques based on the agricultural and forestry satellite scheduled to be launched in 2025, and to establish a matrix and monitoring system for perennial woody crop cultivation areas in the agricultural sector, Lastly, 4) estimating soil carbon stocks change, which is currently estimated by treating all agricultural areas as one, by sub-land classification to implement a dynamic carbon cycle model. This study suggests a detailed guideline and advanced methods of carbon stock change calculation for perennial woody crops, which supports 2050 Carbon Neutral Strategy of Ministry of Agriculture, Food, and Rural Affairs and activate related research in agricultural sector.

• Journal of Korean Society of Forest Science
• /
• v.86 no.3
• /
• pp.365-377
• /
• 1997

Much of the Cumberland Plateau of Tennessee, USA is in mixed hardwoods for which there are no applicable growth and yield predictors. Use of site index as a variable in growth and yield prediction models is limited in most stands because their history is not known and many may not be even-aged. Landtypes may offer an alternative to site index for these mixed stands because they were designed to include land of about equal productivity. To determine vegetation by landtype, dependency between landtype and detailed forest type was tested with Chi-square. Differences in productivity among landtypes were tested by employing regression analyses and analysis of variance(ANOVA). Basal area growth was fitted to the nonlinear models developed by Moser and Hall(1969). Basal area growth and volume growth were also predicted as a function of initial total basal area and initial volume with linear regression by landtype and by landtype class. Differences in basal area growth and volume growth by landtype were tested with ANOVA. Dependency between site class and landtype was tested with Chi-square. Vegetation types seem to be related to landtypes in the study area although the validity of the test is questionable because of a high proportion of sparsely occupied cells. No statistically significant differences in productivity among landtypes were found in this study.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.5
• /
• pp.7-14
• /
• 2021

Tomato crops are highly affected by tomato diseases, and if not prevented, a disease can cause severe losses for the agricultural economy. Therefore, there is a need for a system that quickly and accurately diagnoses various tomato diseases. In this paper, we propose a system that classifies nine diseases as well as healthy tomato plants by applying various pretrained deep learning-based CNN models trained on an ImageNet dataset. The tomato leaf image dataset obtained from PlantVillage is provided as input to ResNet, Xception, and DenseNet, which have deep learning-based CNN architectures. The proposed models were constructed by adding a top-level classifier to the basic CNN model, and they were trained by applying a 5-fold cross-validation strategy. All three of the proposed models were trained in two stages: transfer learning (which freezes the layers of the basic CNN model and then trains only the top-level classifiers), and fine-tuned learning (which sets the learning rate to a very small number and trains after unfreezing basic CNN layers). SGD, RMSprop, and Adam were applied as optimization algorithms. The experimental results show that the DenseNet CNN model to which the RMSprop algorithm was applied output the best results, with 98.63% accuracy.

• Journal of Korean Society of Rural Planning
• /
• v.15 no.4
• /
• pp.213-220
• /
• 2009

Farmland spatial data are needed as a basic information in conducting rational use of farmlands in regional scale. This study develops a method that can be used to make up such farmland spatial data in a simple way and to develop a technique to manage them in a unitary way, and examines the effectiveness of the technique by applying it to the case area. A method that Web-Service Raster Image and Digital Cadastal Map can be utilized as a base map was devised. It was designed applying the vector system, in which one lot of farmland is area unit. Raster image and field survey data were combined to increase the accuracy of data. The lot boundaries of the existing boundary map were adjusted to the shapes of actual farmlands using GIS edition function. A proper farmland use classification system to the area characteristics was established and data obtained from the field survey were coded. Usually it is very difficult to identify the size of one lot of actual farmland in the existing space data, based on the results of the case study, the result map showed actual topography very realistically. Also the frequently occurring lot divisions and the serious topographical modifications by natural disasters frequently have made it impossible to survey farmlands on the catastral map in the field. But the final map had a great usefulness in that it may solve such problems by expressing the filed survey results graphically.

• Korean Journal of Remote Sensing
• /
• v.6 no.2
• /
• pp.89-113
• /
• 1990

The purpose of this study is to develop means to apply GIS and remote sensing technology to the analysis of Korean urban open spaces. To achieve this objective, a framework of analysis of urban open spaces was developed, and then the framework was applied for the evaluation of the potential and suitability of open spaces of Ansan City, which is a new town developed to accomodate industries relocation from Seoul, Korea, mainly due to their pollution problems. The software used in this study are IDRISI, a grid-based GIS, and KMIPS, a remote sensing analysis system. Both packages are based on IBM PC/AT computers with Microsoft DOS. Landsat MSS and TM data were used for the land use classification, land use change detection, and analysis of transformed vegetation indices. The size of the geographic data base is 110 rows and 150 columns with the spatial resolution of 100m$\times$100m. The framework of analysis includes both quanititative and qualitative analysis of open spaces. The quantitative analysis includes size and distribution of open spaces, urban develpment of open spaces, and the degree of vegree of vegetation removal of the study area. The qualitative analysis includes evaluative criteria for primary productivity of land, park use potential, major visual resources, and urban environmental control. The findings of this study can be summarized as follows. First, the size of builtup areas increased 18.73km$^2$, while the size of forest land decreased 10.86km$^2$ during last ten years. Agricultural lands maintained its size, but shifted toward outside of the city into forest. Second, the potential of open spaces for park use is limited mainly due to their lack of accessibility and connectivity among open spaces, in spite of ample acreage and good site conditions. Third, major landscape elements and historic sites should be connected to the open space system of the city by new accesses and buffers.

• Korean Journal of Soil Science and Fertilizer
• /
• v.20 no.1
• /
• pp.1-6
• /
• 1987

This study was designed to evaluate the characteristics, land use and genesis of well adapted paddy soils. They were mostly classified as the Haplaquepts in the U.S.D.A soil taxonomy and as the Grey soils in the Japanese soil classification system. The proportion of these soils in the total acreage of paddy lands was thirty three percents. The fifty four percents in average of these soils were distributed on the local valley and fans on gentle slopes developed from granite, granite gneiss and shale parent materials. The rests were on the fluvio-marine deposits and alluvial deposits. The soils were characterized with prominant development of gleized horizons and clayey or fine loamy textured category. The available soil depth and the ground water level were relatively deep. The base saturation percent were high with weak acidic pH. The potential productivity of these soils was high.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.23 no.1
• /
• pp.15-33
• /
• 2021

In this study, the possibility of discriminating Fire blight (FB) infection tested using the hyperspectral imagery. The reflectance of healthy and infected leaves and branches was acquired with 5 nm of full width at high maximum (FWHM) and then it was standardized to 10 nm, 25 nm, 50 nm, and 80 nm of FWHM. The standardized samples were divided into training and test sets at ratios of 7:3, 5:5 and 3:7 to find the optimal bands of FWHM by the decision tree analysis. Classification accuracy was evaluated using overall accuracy (OA) and kappa coefficient (KC). The hyperspectral reflectance of infected leaves and branches was significantly lower than those of healthy green, red-edge (RE) and near infrared (NIR) regions. The bands selected for the first node were generally 750 and 800 nm; these were used to identify the infection of leaves and branches, respectively. The accuracy of the classifier was higher in the 7:3 ratio. Four bands with 50 nm of FWHM (450, 650, 750, and 950 nm) might be reasonable because the difference in the recalculated accuracy between 8 bands with 10 nm of FWHM (440, 580, 640, 660, 680, 710, 730, and 740 nm) and 4 bands was only 1.8% for OA and 4.1% for KC, respectively. Finally, adding two bands (550 nm and 800 nm with 25 nm of FWHM) in four bands with 50 nm of FWHM have been proposed to improve the usability of multispectral image sensors with performing various roles in agriculture as well as detecting FB with other combinations of spectral bands.