• Asian Journal of Innovation and Policy
• /
• 제11권3호
• /
• pp.397-420
• /
• 2022

This research was conducted by applying a bibliometric analysis to determine the dynamics of research topics from ten percent of research output (international publications) generated by Indonesian scientists from the period of 1945-2021. This study utilizes VOSviewers version 1.6.18 for analysis and visualization of bibliometric networks. The research results indicate that 50.24% of Indonesian international publications are published in the form of articles, with subjects such as: Agricultural and Biological Sciences, Medicine, and Earth and Planetary Sciences as the most dominating subject areas. Regarding the author, Tjia, MO from Bandung Institute of Technology was acknowledged as the top author in terms of the number of publications produced for two periods. The article entitled "Global, regional, and national prevalence of overweight and obesity in children and adults during 1980-2013: A systematic analysis for the Global Burden of Disease Study 2013" (Ng et al., 2014) became the most cited one.

• Journal of Applied Biological Chemistry
• /
• 제66권
• /
• pp.305-310
• /
• 2023

Bandiburichodang (BDC) is a new variety of Zea mays L. Total polyphenol content (TPC) assay and quantitative analysis of ferulic acid (FA) were performed to determine the steaming, roasting conditions of BDC kernels that lead to the highest content. TPC levels increased after roasting under all conditions. TPC levels in samples steamed at 115 ℃ for 25 min were 3.157 mg/g before roasted, and increased to 3.825 and 4.739 mg/g after roasting at 160 and 200 ℃, respectively. Whether BDC kernels were roasted was relevant with TPC content. BDC kernels were extracted to perform quantitative analysis of FA. Roasting temperature affected FA content: the higher the temperature, the lower the content. BDC kernels that were steamed at 115 ℃ for 25 min had 0.178 mg/g of FA content before roasting, and levels decreased to 0.132 and 0.115 mg/g after roasting. Under different roasting conditions, FA content decreased 15 to 50%. We hypothesize that this phenomenon is due to a breakdown of phenolic compounds or cell wall disruption.

• 경영과정보연구
• /
• 제35권3호
• /
• pp.273-287
• /
• 2016

본 연구는 정보화 교육이 농업법인회사에 미치는 영향을 밝히는데 목적을 두었다. 이를 위해, 본 연구는 농림수산식품교육문화정보원에서 실시한 정보화수준 및 활용도 조사 보고서를 이용하여 구조방정식 모델 분석을 실시하였다. 연구결과, 정보화 교육은 소셜네트워크서비스(Social Network Services, SNS)를 활용하는 업무의 비율과 정보통신융합기술(Information and Communications Technologies, ICT)을 통해 축적된 데이터를 사용하는 업무의 비율에 긍정적인 영향을 주었다. 특히, ICT 정보시스템 활용은 조직 내 업무 효율성을 높이는 것으로 나타났다. 그리고 결국, 업무 효율성은 농업 경영 조직의 업무 효과성을 증대시키는 것을 확인하였다. 따라서 농업분야에 대한 정보화 교육은 ICT를 활용한 정보시스템 교육을 중점으로 하여 이뤄져야 할 것이다.

• The Plant Pathology Journal
• /
• 제30권2호
• /
• pp.200-207
• /
• 2014

A viral disease causing severe mosaic, necrotic, and yellow symptoms on Vigna angularis var. nipponensis was prevalent around Suwon area in Korea. The causal virus was characterized as Cucumber mosaic virus (CMV) on the basis of biological and nucleotide sequence properties of RNAs 1, 2 and 3 and named as CMV-wVa. CMV-wVa isolate caused mosaic symptoms on indicator plants, Nicotiana tabacum cv. Xanthi-nc, Petunia hybrida, and Cucumis sativus. Strikingly, CMV-wVa induced severe mosaic and malformation on Cucurbita pepo, and Solanum lycopersicum. Moreover, it caused necrotic or mosaic symptoms on V. angularis and V. radiate of Fabaceae. Symptoms of necrotic local or pin point were observed on inoculated leaves of V. unguiculata, Vicia fava, Pisum sativum and Phaseolus vulgaris. However, CMV-wVa isolate failed to infect in Glycine max cvs. 'Sorok', 'Sodam' and 'Somyeong'. To assess genetic variation between CMV-wVa and the other known CMV isolates, phylogenetic analysis using 16 complete nucleotide sequences of CMV RNA1, RNA2, and RNA3 including CMV-wVa was performed. CMV-wVa was more closely related to CMV isolates belonging to CMV subgroup I showing about 85.1-100% nucleotide sequences identity to those of subgroup I isolates. This is the first report of CMV as the causal virus infecting wild Vigna angularis var. nipponensis in Korea.

• Safety and Health at Work
• /
• 제6권1호
• /
• pp.18-24
• /
• 2015

Background: In 2006, three farmers died at the bottom of an agricultural shallow well where the atmosphere contained only 6% oxygen. This study aimed to document the variability of levels of oxygen and selected hazardous gases in the atmosphere of wells, and to identify ambient conditions associated with the low-oxygen situation. Methods: A cross-sectional survey, conducted in June 2007 and July 2007, measured the levels of oxygen, carbon monoxide, hydrogen sulfide, and explosive gas (percentage of lower explosive limit) at different depths of the atmosphere inside 253 wells in Kamphaengphet and Phitsanulok provinces. Ambient conditions and well use by farmers were recorded. Carbon dioxide was measured in a subset of wells. Variables independently associated with low-oxygen condition (<19.5%) were identified using multivariate logistic regression. Results: One in five agricultural shallow wells had a low-oxygen status, with oxygen concentration decreasing with increasing depth within the well. The deepest-depth oxygen reading ranged from 0.0% to 20.9%. Low levels of other hazardous gases were detected in a small number of wells. The low-oxygen status was independently associated with the depth of the atmosphere column to the water surface [odds ratio (OR) = 13.5 for 8-11 m vs. <6 m], depth of water (OR = 0.17 for 3-<8 m vs. 0-1 m), well cover (OR = 3.95), time elapsed since the last rainfall (OR = 7.44 for >2 days vs. <1 day), and location of well in sandy soil (OR = 3.72). Among 11 wells tested, carbon dioxide was detected in high concentration (>25,000 ppm) in seven wells with a low oxygen level. Conclusion: Oxygen concentrations in the wells vary widely even within a small area and decrease with increasing depth.

• Safety and Health at Work
• /
• 제9권2호
• /
• pp.164-171
• /
• 2018

Background: In recent years, the interest in health and safety in the workplace has increased. Agriculture is one of the human work activities with the highest risk indexes. Studies on risk perception of agricultural workers are often referred to as specific risk factors (especially pesticides), but the risk perception plays an important role in preventing every kind of accident and occupational disease. Methods: The aim of this research is to test a new method for understanding the relation between risk perception among farmers and the main risk factors to which they are exposed. A secondary aim is to investigate the influence of training in risk perception in agriculture. The data collection was realized using a questionnaire designed to investigate the risk perception; the questionnaire was given to a sample of 119 agricultural workers in central Italy. Through the use of the "principal components analysis" it was possible to highlight and verify the latent dimensions underlying the collected data in comparison with scales of attitudes. Results: Results show that the highest percentage of strong negative attitude is among the people who have worked for more years, while farmers who have worked for fewer years have a marked positive attitude. Conclusion: The analysis of the questionnaires through the synthetic index method (Rizzi index) showed that agricultural workers involved, in particular the elderly workers, have a negative attitude towards safety; workers are hostile to safety measures if they have not attended special training courses.

• 디지털융복합연구
• /
• 제18권4호
• /
• pp.243-250
• /
• 2020

농작물 재배에 있어 가장 큰 위험 요소는 날씨이므로 재배지의 장기 농업 기상정보를 얻을 수 있다면 정식과 수확 시기 등을 예측할 수 있다. 따라서 체계적인 농작업을 기획하여 관리할 수 있으며 이는 농가의 안정적인 수확으로 이어질 것으로 기대한다. 본 연구는 GloSea5와 기계학습을 이용하여 효과적인 고랭지배추의 재배를 위한 장기 농업기상정보 예측 방법을 제시하였다. GloSea5는 계절예측시스템으로 최대 240일까지의 기상을 예측한다. 심층신경망과 공간랜덤포레스트를 이용하여 장기 일 평균기온을 예측한 결과 심층신경망이 공간랜덤포레스트에 비해 장기예측성능이 우수하였다. 하지만 공간랜덤포레스트는 강원도 전역의 기온을 짧은 시간에 예측하는 장점이 있다. 공간랜덤포레스트로 분석한 결과 여름철과 해발고도가 낮은 지역의 장기 일 평균기온이 잘 예측되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제50권6호
• /
• pp.458-474
• /
• 2022

Many methods have been explored to increase the palatability of pine (Pinus merkusii), the most common wood used for termite baiting. However, because of the undersupply of pine in Indonesia, it is crucial to vary the wood species for termite baiting and look for potential alternatives. Furthermore, various studies have shown that baiting time influences the intensity and pattern of termite attacks. Therefore, the present research aimed to study the preferences of subterranean termites and find the ideal baiting time among community wood species from Bogor, West Java, as a baiting alternative to pine. The woods tested were Acacia mangium (acacia), Falcataria moluccana (sengon), Anthocephalus cadamba (jabon), Maesopsis eminii (manii), Swietenia mahagoni (mahogany), Hevea brasiliensis (rubberwood), and P. merkusii (pine). Field tests were carried out based on the American Society for Testing and Materials D 1758-06 at the Arboretum, Faculty of Forestry and Environment, IPB University, with a baiting time of one to six months. The results led to the identification of four species of termites, namely Microtermes sp., Macrotermes sp., Shedorhinotermes sp., and Capritermes sp.. The frequency of termite attacks on the test site reached 93.1%. Rubberwood was the most potential wood bait for subterranean termites, indicated by the highest average weight loss value (65.8%) with a shorter optimal baiting time (up to one month) than that of other tested woods.

• 드라이브 ㆍ 컨트롤
• /
• 제20권2호
• /
• pp.31-39
• /
• 2023

The aim of this study was to measure and analyze engine load factor (LF) according to working conditions (operation type and gear stage) of small agricultural multi-purpose cultivator to estimate the emission of air pollutants. To calculate LF, a torque sensor capable of collecting torque and rotational speed was installed on the engine output shaft and DAQ was used to collect data. A field test was conducted with major operation of a cultivator and tillage operations (plow tillage and rotary tillage). Engine power was calculated using engine torque and rotational speed and LF was calculated using real-time power and rated power. In addition, unified LF was calculated using the weight for each operation and the average LF for each operation. As a result, average LF values at 1.87 and 3.10 km/h by plow tillage were 0.50 and 0.69, respectively. Average LF values at 1.87 and 3.10 km/h by rotary tillage were 0.70 and 0.78, respectively. Furthermore, unified LF calculated in consideration of the weight factor showed a value of 0.65, which was 135% higher than the conventional LF (0.48). Results of this study could be used as basic information for realizing LF values in the field of agricultural machinery.

• 농업과학연구
• /
• 제50권4호
• /
• pp.617-628
• /
• 2023

This study aimed to evaluate the engine load factor (LF) of a 90 kW agricultural combine harvester. The combine harvester used in this study is equipped with an electronic engine, and real-time engine data (torque and speed) was collected through a controller area network. The speed of the combine harvester during harvesting operation was divided into three levels (4, 5, and 6 km/h) for the representative operation speed range of 4 to 6 km/h. The LF was calculated using the engine load data measured in real time during harvesting. A weight was applied to the LF for each condition based on a survey of the usage. Results of the field test showed that the LF was 0.53, 0.64, and 0.87 at working speeds of 4, 5, and 6 km/h, respectively. The highest engine load factor was recorded at 6 km/h. Finally, based on the weight for the usage applied, the integrated engine LF was analyzed to be 0.69, which is approximately 144% higher than the currently applied LF of 0.48. A study on LF analysis for the entire work cycle, including idling and driving of the combine harvester, will be addressed in a future study.