• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.443-446
• /
• 2009

In this study, a series of degradation test for structural adhesives was performed to investigate the possibility of replacement of the alternative adhesives to the conventional adhesives. Four types of the adhesives were exposed to combined environmental conditions over 1000 hours at an accelerated aging tester, which can simulate natural weather conditions such temperature, moisture and ultraviolet. Mechanical and chemical properties of the adhesives were evaluated through material testing system and FT/IR spectrometer. According to the results, the conventional adhesives can be replaced by the alternative adhesives because the alternative adhesives were more stable to environmental conditions rather than the conventional adhesives.

• Nuclear Engineering and Technology
• /
• v.46 no.5
• /
• pp.605-618
• /
• 2014

The effects of variability of the mechanical properties of lead rubber bearings on the response of a seismic isolation system are investigated. Material variability in manufacturing, aging, and operation temperature is assumed, and two variation models of an isolation system are considered. To evaluate the effect of ground motion characteristics on the response, 27 earthquake record sets with different peak A/V ratios were selected, and three components of ground motions were used for a seismic response analysis. The response in an isolation system and a superstructure increases significantly for ground motions with low A/V ratios. The variation in the mechanical properties of isolators results in a significant influence on the shear strains of the isolators and the acceleration response of the superstructure. The variation provisions in the ASCE-4 are reasonable, but more strict variation limits should be given to isolation systems subjected to ground motions having low A/V ratios. For application of seismic isolation systems to safety-related nuclear structures, the variation in the material and mechanical properties of the isolation system should be properly controlled during the manufacturing and aging processes. In addition, special consideration should be given to minimize the accidental torsion caused by the dissimilarity in the stiffness variations of the isolators.

• Food Science and Preservation
• /
• v.24 no.4
• /
• pp.491-496
• /
• 2017

Paddy rice is typically stored during postharvest until rice grain is processed into brown rice and milled rice by hulling and milling procedure, respectively. Recently, instead of storing paddy rice, storage of brown rice has been in the spotlight because it is more convenient and economically feasible. Different brown rice cultivars with varying amylose contents including waxy rice, medium-waxy rice, and non-glutinous rice were stored in room temperature storage for four months, and the changes in grain qualities of brown rice were evaluated. Amylose content significantly affected pasting properties in which rice cultivar with higher amylose content showed longer pasting time and higher peak viscosity. Storage also affected pasting viscosities, showing an increase in peak viscosity, but a decrease in breakdown viscosity. The changes in pasting viscosity during storage could be an important starch property for aged brown rice utilization. Waxy brown rice showed the weakest aging property in terms of free fatty acids (FFA) accumulation, whereas non-glutinous rice was more substantial grain quality against aging. The FFA values of two months storage were not significantly different from the initial FFA contents, suggesting that brown rice stored in room temperature for two months could be feasible for direct consumption of brown rice.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.05a
• /
• pp.183-188
• /
• 2002

With the contact pad consisted of $0.5{\mu}{\textrm}{m}$ $Au/5{\mu}{\textrm}{m}$ Ni/Cu layers on a conventional ball grid array(BGA) substrate, metallurgical reaction properties between the pad and In-15(wt.%)Pb-5Ag solder alloy were studied after reflow and solid aging. In as-reflow condition, thin AuIn$_2$or Ni$_{28}$In$_{72}$ intermetallic layer was formed at the solder/pad interface according to reflow time. Dissolution of the Au layer into the molten solder was remarkably limited in comparison with eutectic Sn-37Pb alloy. After solid aging of 300 hrs, thickness of In-Ni layer increased to about $2{\mu}{\textrm}{m}$ in the both as-reflow case. It was observed that In atoms diffuse through the AuIn$_2$phase to react with underlaying Ni layer. The metallurgical reaction properties between In-l5Pb-7Ag alloy and Au/Ni surface finish were analysed to result in suppression of Au-embrittlement in the solder joints.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.6
• /
• pp.293-299
• /
• 2004

In this paper, thermal and mechanical properties of electric epoxy with water aging were discussed. We made elastic epoxy specimen adding a ratio of 0〔phr〕20〔phr〕, 35〔phr〕 and 53〔phr〕 with modifier to existing epoxy. We studied mechanical property of elastic resin after absorption in water from 0 to 484 hours. As a result, diffusion factor of elastic epoxy showed 20-21${\times}$10$^{-4}$ $\textrm{mm}^2$/s and general epoxy showed 9.5${\times}$10$^{-4}$ $\textrm{mm}^2$/s. Elastic property increased linearly according to addiction and decreased according to water absorption. Tensile strength was reduced according to addition. It was affected by water absorption of micro-void of elastic epoxy. Hardness inclined to decrease after increasing according to absorbed time. In water-absorption state, it was experimented a change of heat flow by temperature of elastic epoxy and change of thermal expansion coefficient. DSC (Differential Scanning Calorimetry) and TMA (Thermomechanical Analysis) equipments were used to measure Tg. A temperature ringe of DSC was from -0($^{\circ}C$) to 200($^{\circ}C$). One of TMA was from -0($^{\circ}C$) to 350($^{\circ}C$). In addition, we investigated structural analysis of water absorbed specimen using SEM (Scanning Electron Microscope).

• Korean Journal of Metals and Materials
• /
• v.48 no.10
• /
• pp.914-921
• /
• 2010

Studies were carried out to assess the microstructural and mechanical properties of ferriticmartensitic steel under a flowing sodium environment. HT9 (12Cr-MoVW) and Gr.92 (9Cr-MoVNbW) steel were exposed to liquid sodium at $650^{\circ}C$ containing dissolved oxygen of 20 ppm for 2333 hours and evaluations of the microstructure as well as the mechanical properties of the microhardness and nanoindentation were carried out. The result showed that both HT9 and Gr.92 exhibited macroscopic weight loss caused by general corrosion as well as localized types such as intergranular corrosion and pitting. Decarburization at the steel surface took place as the test proceeded. As the Cr content increased, dissolution and decarburization were suppressed. Assessment of the actual cladding geometry revealed that an aging process rather than decarburization governed the mechanical properties, which resulted in a decrease of the microhardness and yield stress.

• Journal of The Korean Society of Integrative Medicine
• /
• v.9 no.4
• /
• pp.39-47
• /
• 2021

Purpose : This study aimed to investigate age-related mechanical changes in the erector spinae muscles, specifically in terms of tone, elasticity, and stiffness, in the elderly population compared to the younger population Methods : The mechanical properties, including tone, elasticity, and stiffness, of the erector spinae muscles were measured using myotonometry in 47 male adult subjects, divided into the younger group (23 subjects aged 19 to 28 years) and the elderly group (22 subjects aged 69 to 83 years). The measurements were performed in both the prone and sitting positions. The tone, elasticity, and stiffness of the erector spinae muscles were statistically compared between the two groups using a t-test. Results : The study showed increased stiffness and decreased elasticity in the erector spinae muscles in the elderly group compared to the younger group (p<0.01~0.001). The results were similar in both the prone and sitting positions. Conclusion : There are age-related degenerative changes that affect the mechanical properties of the erector spinae muscles. In addition, myotonometry can be suggested to be a useful examination tool in evaluating these changes provided that further studies are conducted and standard methods of application have been established in the future.

• Proceedings of the KIEE Conference
• /
• 2001.11a
• /
• pp.152-154
• /
• 2001

Recently the extensive use of composite insulators for transmission lines can ultimately be justified only on long-term qualification tests. Especially, it is possible for the Polymer insulator to be aged in according to the environment in which it is used this may bring about the decrease of the duration of voltage application. So, this paper deals with aging property of the polymer insulator installed at real transmission line in the industry area. The contact angle, arc test, tracking test were measured for acquiring the degradation characteristics of silicone rubber and the SEM, XRF, FT-IR tests were measured for analyzing the crack and components. Also the surface leakage current of the polymer insulator was compared with that of the porcelain insulator. Finally, we knew that the aging property was not appeared during seven months at real transmission line in the industry area.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.18 no.1
• /
• pp.25-33
• /
• 2012

As of November 1st 2010, 59% of overall residences in Korea are apartments with 8,185,000 households and when including the multi-unit houses, 71.0% of the overall residences are multifamily houses. The apartments have become the most universal form of residence in Korea and its' relative weight will continuously increase in the future. Meanwhile, Korea has turned into aging society in 2000 and will turn into the super-aged society by 2026 to display the world's fastest speed for aging. Majority of the elderly will spend their declining years in apartments. To understand the residence consciousness and its' properties for unit housing of the elderly residing in apartments, the present study obtained the following results through surveying the 541 nationwide samples. First, the elderly most prefer the mid and high levels(6-9th floors, or 10-15th floors) of apartments. Second, the elderly couples most prefer areas of $85m^2$ while single elderly most prefer $60m^2$. Third, the elderly feel the most inconveniences in bathrooms and showers. Fourth, safety accidents in dwelling of the elderly have no significant correlation with age, gender or their possessed diseases. Fifth, the elderly displayed high satisfaction for their bedrooms. Sixth, there were less tendencies for elderly to feel lack of storage spaces or conduct remodeling. As a result of the analysis, all apartment houses of Korea must support the physical aging of residents and prevent safety accidents in houses to enable Korean aging in place.

• Elastomers and Composites
• /
• v.52 no.3
• /
• pp.167-172
• /
• 2017

Ultra-high performance (UHP) tires, for which demand has recently surged, are subject to severe strain conditions due to the low aspect ratio of their sidewalls. It is important to ensure sidewall material durability, since a sudden tire sidewall breakage during vehicle operation is likely to cause a major accident. In the automotive application of rubber parts, cracking is defined as a failure because when cracks occur, the mechanical properties of rubber change. According to Mars, Andre et al., strain and strain energy density (SED) are mainly used as a failure parameters and the SED is generally used as a fatigue damage parameter. In this study, the fatigue life curves of sidewall rubber of tires were determined by using the SED as fatigue damage parameter while the effect of aging on fatigue life was evaluated after obtaining the SED-Nf curves according to aging condition.