• 한국전기전자재료학회논문지
• /
• 제20권12호
• /
• pp.1062-1067
• /
• 2007

In this paper, we have investigated thermal properties of semiconductive shield materials for power cables. EEA (Ethylene Ethyl Acrylate) was used for base polymer and TGA (Thermal Gravimetric Analysis) and AFM (Atomic Force Microscope) were investigated with various carbon black and CNT (carbon nanotube) contents. When CNT reinforced composites and conventional composite were investigated with TGA, we knew that thermal properties of CNT reinforced composite were better than them of conventional composite. To investigate roughness, we used AFM. Before and after aging, AFM was applied and after aging, roughness was increased. As a result, suitable CNT and CB(carbon black) content is CNT:CB=50:50.

• 대한약침학회지
• /
• 제20권1호
• /
• pp.29-35
• /
• 2017

Objectives: Aging is an unconscious and gradual process that can lead to changes in biological systems. Induction of oxidative stress and apoptosis, hepatotoxicity and neurotoxicity are involved in the aging process. Regarding the antioxidant property of black seed oil, the aim of this study was to evaluate the anti-aging effect of Nigella sativa (N. sativa) oil on d-galactose-induced aging in mice. Methods: For induction of aging, D-galactose (500 mg/kg, subcoutaneously SC) was administrated to male mice for 42 days. Animals were treated with D-galactose alone or with b lack seed oil (0.1, 0.2, 0.5 mL/kg, intraperitoneally (ip)). Additionally, vitamin E (200 mg/kg) was used as a positive control. At the end of treatment, the malondialdehyde (MDA) and the glutathione (GSH) contents in brain and liver tissues were measured. Also, enzymes in serum, including aspartate aminotransferase (AST) and alanine amino transferase (ALT), were determined. The levels of the proteins Bax, Bcl2, caspase-3 (pro and cleaved) in brain and liver tissues were evaluated. Results: Administration of D-galactose (500 mg/kg, SC) for 42 days increased serum levels of ALT and AST, as well as the MDA content, in brain and liver tissues, but decreased the GSH content. Additionally, the levels of apoptotic proteins, including Bax, procaspase-3 and caspase-3 cleaved, were markedly increased. N. sativa oil (0.1 and 0.2 mL/kg) diminished the levels of the biochemical markers ALT and AST. Administration of black seed oil (0.1, 0.2 and 0.5 mL/kg) reduced lipid peroxidation and at doses 0.1 and 0.2 mL/kg significantly recovered the GSH content. The oil decreased Bax/Bcl2 levels and at 0.1 mL/kg down-regulated the expressions of caspase-3 (pro and cleaved) proteins in brain and liver tissues. Conclusion: Through its antioxidant and anti-apoptosis properties, black seed oil exhibited an anti-aging effect in a model of aging induced with D-galactose.

• 한국축산식품학회지
• /
• 제39권3호
• /
• pp.510-519
• /
• 2019

The effect of combined electron-beam irradiation and aging temperature of pork on microbiological and physicochemical properties was investigated. The samples from pork shoulder were irradiated with 0 or 2 kGy, vacuum-packaged, and assigned randomly to an aging temperature ($2^{\circ}C$, $10^{\circ}C$, or $25^{\circ}C$) during 8 d. On 4 d of aging at $25^{\circ}C$, total aerobic bacteria of non-irradiated ones reached 7 Log CFU/g which is no salable levels. Shear force values of irradiated meat after aging for 2 and 4 d at $25^{\circ}C$ was lower than those aged at $2^{\circ}C$. Irradiated samples at $2^{\circ}C$ had lower cooking loss after 2 and 8 d of aging, compared with other aging temperatures. Irradiation did not accelerate 2-thiobarbituric acid reactive substance (TBARS) value when aged up to 4 d. Irradiated samples aged at $10^{\circ}C$ and $25^{\circ}C$ for 8 d scored significantly higher TBARS values. With an increased aging period, $a^*$ and $b^*$ in irradiated samples at $2^{\circ}C$ slightly increased, but irradiation caused negligible changes in meat color. The highest contents of a desirable nucleotide flavor compounds (inosine-5-phosphate) were observed in pork at $2^{\circ}C$ when aged for 4 and 8 d, while the lowest contents were observed at $25^{\circ}C$. Aging in irradiated pork for 8 d at $2^{\circ}C$ resulted in optimal condition with improved meat quality and minimal microbiologically negative defect.

• The Journal of Advanced Prosthodontics
• /
• 제14권6호
• /
• pp.360-368
• /
• 2022

PURPOSE. This study assessed the physical and mechanical properties of interim crown materials fabricated using various digital techniques after accelerated aging. MATERIALS AND METHODS. Three groups of interim dental restorative materials (N = 20) were tested. The first group (CO) was fabricated using a conventional manual method. The second group (ML) was prepared from prefabricated resin blocks for the milling method and cut into specimen sizes using a cutting disc. The third group (3D) was additively manufactured using a digital light-processing (DLP) 3D printer. Aging acceleration treatments using toothbrushing and thermocycling simulators were applied to half of the specimens corresponding to three years of usage in the oral environment (N = 10). Surface roughness (Ra), Vickers microhardness, 3-point bending, sorption, and solubility tests were performed. A 2-way analysis of variance (ANOVA) and Fisher's multiple comparison test were used to compare the results among the groups. RESULTS. The mean surface roughness (Ra) of the resin after accelerated aging was significantly higher in the CO and ML groups than that before aging, but not in the 3D group. All groups showed reduced hardness after accelerated aging. The flexural strength values were highest in the 3D group, followed by the ML and CO groups after accelerated aging. Accelerated aging significantly reduced water sorption in the ML group. CONCLUSION. According to the tested material and 3D printer type, both 3D-printed and milled interim restoration resins showed higher flexural strength and modulus, and lower surface roughness than those prepared by the conventional method after accelerated aging.

• 펄프종이기술
• /
• 제47권4호
• /
• pp.151-159
• /
• 2015

Paper records were generally degraded by some factors from atmospheric environments, like temperature, relative humidity or air pollutants. In this study, the degradation behavior of paper records by single or mixed gases of $NO_2$, $SO_2$, HCHO and TVOC was evaluated. The mechanical, optical and chemical properties of 4 kinds of paper (acid and neutral-based printing paper, traditional Hanji, and filter paper) were directly and indirectly affected by gaseous harmful materials. The brightness and $L^*$ value in all papers were slightly increased by accelerated aging under gaseous HCHO and TVOCs, but highly decreased by conditions under gases $NO_2$ and $SO_2$. The optical properties of paper records were most vulnerable in acid-based paper and high stable in filter paper and traditional Hanji by air pollutant degradation. The aging treatments under mixed gas pollutants including $NO_2$ resulted in decrease of physical, mechanical and optical properties of paper, so it was supposed that the concentration of $NO_2$ gas would be strictly controlled for optimum indoor air quality management in domestic storage centers for paper records.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제4권2호
• /
• pp.101-109
• /
• 2016

발전소 내열강의 물성치는 고온 가동시간이 누적됨에 따라 열시효의 영향을 받는다. 본 연구에서는 제 4 세대 원자력시스템의 재료로 널리 채택되고 있는 Mod.9Cr-1Mo (ASME Grade 91)강을 대상으로 항복강도, 인장강도 및 파괴거동에 열시효가 미치는 영향에 대해 조사 및 분석하였다. 국내에서 가동 중인 초초임계(USC) 화력발전소의 배관계통에서 채취한, 73,716 시간의 가동 이력을 겪은 Gr.91 강 재료가 재료 실험을 위해 사용되었고, 동 시험결과와 가동 이력을 겪지 않은 신재의 시험결과를 비교 분석하였다. 또한 ASME 코드의 물성치와 RCC-MRx 의 물성치와 비교 분석하였고, 이들 설계기술기준 물성치의 보수성은 신재 및 가동 이력을 겪은 재료의 시험결과와 비교 분석을 통해 정량화하였다.

• 한국재료학회지
• /
• 제30권10호
• /
• pp.502-508
• /
• 2020

This paper focuses on the electrical properties and stability against DC accelerated aging stress of ZnO-V₂O₅-MnO₂-Nb₂O₅-Bi₂O₃-Co₃O₄-Dy₂O₃ (ZVMNBCD) varistor ceramics sintered at 850 - 925 ℃. With the increase of sintering temperature, the average grain size increases from 4.4 to 11.8 mm, and the density of the sintered pellets decreases from 5.53 to 5.40 g/㎤ due to the volatility of V₂O₅, which has a low melting point. The breakdown field abruptly decreases from 8016 to 1,715 V/cm with the increase of the sintering temperature. The maximum non-ohmic coefficient (59) is obtained when the sample is sintered at 875 ℃. The samples sintered at below 900 ℃ exhibit a relatively low leakage current, less than 60 mA/㎠. The apparent dielectric constant increases due to the increase of the average grain size with the increase of the sintering temperature. The change tendency of dissipation factor at 1 kHz according to the sintering temperature coincides with the tendency of the leakage current. In terms of stability, the samples sintered at 900 ℃ exhibit both high non-ohmic coefficient (45) and excellent stability, 0.8% in 𝚫E_B/E_B and -0.7 % in 𝚫α/α after application of DC accelerated aging stress (0.85 E_B/85 ℃/24 h).

• 한국재료학회지
• /
• 제9권9호
• /
• pp.905-912
• /
• 1999

분말야금법으로 제조된 Cu-7.5Ni-5Sn 합금의 용체화 및 시효 열처리 조건에 따른 기계적 특성의 변화를 관찰하였다. As-received 상태의 Cu-7.5Ni-5Sn 합금을 시효한 경우에는 시효 20분 후에 ${\gamma}$\\` 상의 석출에 의한 강도 증가를 나타내는데 반해, 재용체화 처리된 시편에서는 시효 수십초부터 스피노달 분해에 의한 급격한 강도의 증가를 나타내고 있다. 그러나 전체적인 인장강도는 재용체화 처리를 행한 경우에 비해 as-received 상태에서 등온 시효한 경우가 더욱 우수한 것으로 나타났다. 이러한 현상은 재용체화 처리에 의한 결정립 성장에 기인한 것으로 사료된다. As-received 상태의 Cu-7.5Ni-5Sn 합금을 장시간 시효하게 되면 결정립계에 불연속 석출물이 생성되었으며, 이러한 불연속 석출물의 생성과 성장은 열처리 조건에 영향을 받는 것으로 관찰되었으며, 합금의 최종 기계적 성질에 크게 영향을 미치는 것으로 판단된다.

• 한국재료학회지
• /
• 제23권1호
• /
• pp.18-23
• /
• 2013

In this study, the effects of cryogenic treatment cycles on the residual stress and mechanical properties of 7075 aluminum alloy (Al7075) samples, in the form of a tube-shaped product with a diameter of 500 nm, were investigated. Samples were first subjected to solution treatment at $470^{\circ}C$, followed by cryogenic treatment and aging treatment. The residual stress and mechanical properties of the samples were systematically characterized. Residual stress was measured with a cutting method using strain gauges attached on the surface of the samples; in addition, tensile strength and Vickers hardness tests were performed. The detailed microstructure of the samples was investigated by transmission electron microscopy. Results showed that samples with 85 % relief in residual stress and 8% increase in tensile strength were achieved after undergoing three cycles of cryogenic treatments; this is in contrast to the samples processed by conventional solution treatment and natural aging (T4). The major reasons for the smaller residual stress and relatively high tensile strength for the samples fabricated by cryogenic treatment are the formation of very small-sized precipitates and the relaxation of residual stress during the low temperature process in uphill quenching. In addition, samples subjected to three cycles of cryogenic treatment demonstrated much lower residual stress than, and similar tensile strength compared to, those samples subjected to one cycle of cryogenic treatment or artificial aging treatment.

• 대한한방부인과학회지
• /
• 제25권4호
• /
• pp.46-55
• /
• 2012

Objectives: It is well known that genetic factors and environmental factors play major role in aging skin. In general, son and daughter take after their parents in appearance. But comparability of skin properties in Korean family has not been well estimated. So we evaluated the correlation of skin properties in Korean mother-daughter pairs. Methods: 10 couples of mother and daughter pair(n=20) participate in this study. Mothers and daughters were aged $50.6{\pm}2.459$ and $23.8{\pm}2.15$ years, respectively. Skin moisture, sebum, skin color and elasticity is measured using non-invasive method : Corneometer CM825, Sebumeter(MPA580), Mexameter MX18, Cutometer MPA580. Statistical analysis program we used is Minitab 14 Korea. Results: The Skin moisture of mother group was significantly higher than daughter group. And skin elasticity(R2) of the daughter group was significantly higher than mother group. In the results of correlation analysis between mother and daughter pairs, skin elasticity(R2) had high positive correlation(r=0.729, p=0.026). But skin moisture, sebum, melanin index, erythema index and skin elasticity(R5) did not be confirmed a significant correlation. Conclusions: Skin elasticity(R2) is the only factor that showed high positive correlation significantly in mother and daughter pairs. Mother and daughter share the genetic factors and environmental factors that influence skin aging. So, mother's aging pattern will be a good guide for anti-aging of daughters.