• 대한토목학회논문집
• /
• 제30권5A호
• /
• pp.417-424
• /
• 2010

격리장치로서 적층고무받침의 동적 특성은 고무 열 노화로 인한 미세 구조의 변화로 인해 악화 될 수 있다. 그 결과, 예기치 못한 지진의 발생으로 교량이나 건물들은 치명적이 손상을 입게 된다. 여기서, 적층 고무받침의 동적특성은 압축-전단하중 및 반복하중, 극한파괴시험은 열 노화 전 후에 시험하여 상호 비교하였다. 실험 결과, 적층고무받침에서의 열 노화 현상은 전단강성과 에너지의 감쇠 그리고 등가감소계수에 영향이 있음을 알 수 있었다. 이것은 적층고무받침의 열 노화에 의한 동적특성의 저하를 의미하고, 적층고무받침 설계시 고려해야할 필요가 있다고 판단된다.

• Corrosion Science and Technology
• /
• 제22권5호
• /
• pp.330-340
• /
• 2023

The objective of this study was to analyze effects of aging time on property degradation of super austenitic stainless steel of PRE 52.8 and super duplex stainless steel of PRE 48.7. To analyze corrosion properties based on aging time, a critical pitting temperature test was performed in a solution of 6% FeCl₃ + 1% HCl and an anodic polarization test was performed in deaerated 0.5N HCl + 1N NaCl solution at a temperature of 50 ℃. Surface hardness was measured to analyze mechanical properties. It was found that corrosion properties and mechanical properties deteriorated rapidly as aging time increased. Critical pitting temperature had the most effect on critical aging time at which property changes occurred rapidly, followed by pitting potential and hardness. This trend was found to be closely related to the fraction of sigma phase. Rate of sigma phase formation was found to be significantly faster in duplex stainless steel than in austenitic stainless steel.

• Elastomers and Composites
• /
• 제40권3호
• /
• pp.181-187
• /
• 2005

가교 시스템이 다른 NR 가황물의 열노화에 의한 물성 변화를 연구하였다. 두 가지 황가교 시스템과 한 가지 레졸 가교 시스템을 도입하였으며, 가교제 함량을 변화시켰다. 황 가교시스템으로 만든 NR 가황물의 경우, $90^{\circ}C$에서 3일간 노화 후 경도와 모듈러스는 증가한 반면 신율과 인장강도는 감소하였다. 레졸 가교 시스템으로 만든 NR 가황물의 경우에는 노화 후 전반적으로 물성이 하락하였다. 열노화에 의한 물성 변화를 가교밀도의 변화로 설명하였다. 노화 후, 황 가교 시스템으로 만든 NR 가황물의 가교밀도는 증가한 반면, 레졸 가교 시스템으로 만든 NR 가황물의 가교밀도는 감소하였다. 노화방지제의 이동이 물성에 미치는 영향에 대해서도 조사하였다. 그러나 노화방지제의 이동으로는 노화에 의한 물성의 변화를 충분히 설명할 수 없었다.

• 한국재료학회지
• /
• 제30권6호
• /
• pp.315-320
• /
• 2020

This study deals with the yielding behavior and strain aging properties of three bake hardening steels with dual-phase microstructure, fabricated by varying the annealing temperature. Bake hardening and aging tests are performed to examine the correlation of martensite volume fraction with yielding behavior and strain aging properties of the bake hardening steels with dual-phase microstructure. The volume fraction of martensite increases with increasing annealing temperature. Room-temperature tensile test results show that the yielding behavior changes from discontinuous-type to continuous-type with increasing volume fraction of martensite due to higher mobile dislocation density. According to the bake hardening and aging tests, the specimen with the highest fraction of martensite exhibited high bake hardening with low aging index because solute carbon atoms in ferrite and martensite effectively diffuse to dislocations during the bake hardening test, while in the aging test they diffuse at only ferrite due to lower aging temperature.

• 동아시아식생활학회지
• /
• 제21권4호
• /
• pp.545-552
• /
• 2011

Fernbraken is a popular and well-known wild grass, but the physiochemical properties of Korean Traditional pickling (Jangachi) during aging have been little reported. Therefore, this study was carried out to investigate the physiochemical properties of Fernbraken Jangachi treated with a soybean sauce mixture for 6 weeks (1st pretreatment) as well as fermented with soybean paste, red hot pepper paste and soybean sauce for 7 weeks. Total polyphenol contents, acidity, salinity, sweetness (Brix), and ${\alpha}$-tocopherol of Fernbraken Jangachi all increased with aging period. On the other hand, pH and total acidity of Fernbraken Jangachi did not change much. Among the three kinds of Jangachies, Jangachi fermented with soybean sauce showed 2 fold higher salinity and total acidity levels compared to the others. Therefore, the physiochemical properties of Fernbraken Jangachi were dependent on the pickling properties, such as soybean paste, hot pepper paste or soybean sauce, and these properties maintained a certain level after 5~6 weeks of aging. Further, proper aging period for Fernbraken Jangachi was suggested as 10 weeks.

• 펄프종이기술
• /
• 제46권6호
• /
• pp.87-93
• /
• 2014

Optical brightening agents (OBA) is generally used to improve the optical property of printing paper in the paper industry. However, effects of OBA addition on paper preservability has been not fully understood yet. Therefore, this study was aimed to investigate effects of a OBA on the aging characteristics of paper. The OBA treatment of three different types was performed by dipping a filter paper into each a OBA solutions of different concentrations. The filter papers applied with a OBA were artificially aged at 80oC and 65% RH, and their optical and mechanical properties were evaluated. It was found that application of OBAs influenced the aging characteristics of paper. Especially, after aging, the optical and mechanical properties of the filter paper treated with the tetra-type OBA were more significantly decreased than those of the non-treated filter paper. The more the concentration of the tetra-type OBA increased, the more decreasing rate of optical and mechanical properties of the filter paper. While, in case of di-type OBA and hexa-type OBA, paper optical and mechanical properties were slightly decreased or not changed with a OBA treatment.

• Composites Research
• /
• 제22권6호
• /
• pp.39-44
• /
• 2009

가속노화장치를 이용하여 노출시간에 따른 탄소섬유/에폭시 복합재 링 시편의 노화 특성을 평가하였다. 온도, 수분, 자외선 등의 복합적인 노출조건은 최대 3000시간까지 적용하였다. 노출시간에 따른 링 시편의 인장특성과 곡률의 영향이 고려된 굽힘특성은 하중시험장치를 이용하여 평가하였으며 노화표면은 전자현미경을 통해 관찰하였다. 연구결과에 따르면 인장강성은 환경인자의 노출시간에 큰 영향을 받지 않지만 인장강도는 노출 초기에 물리시효 현상과 경화 반응으로 다소 증가하지만 노출시간이 길어지면 열화 영향으로 감소하였다. 굽힘탄성계수와 굽힘강도는 노출초기에 다소 증가하지만 노출시간이 길어지면 감소하는 양상을 나타내었다. 또한 전자현미경을 통해 관찰된 노화표면은 환경인자의 노출시간에 따라 달라지기 때문에 환경인자의 노출시간에 따른 기계적 특성의 변화를 규명하기 위한 정보를 제공해 준다.

• 펄프종이기술
• /
• 제43권1호
• /
• pp.11-16
• /
• 2011

This study was carried out in order to elucidate the effect of latex dosage and properties on aging behavior of coated paper. The coated paper with five different coating formulations were prepared and also four different latices were used. The coated paper were thermally aged at $105^{\circ}C$ for 14 days and the optical properties were measured. Increasing latex content increased the magnitude of reduction in brightness and whiteness. In addition, the variations in CIE a$^*b^*$ were larger with increasing latex dosage. Latex which has the lower gel content and the higher Tg showed the higher reduction in brightness and whiteness and much variation in CIE a$^*b^*$. However the particle size of latex didn't affect to thermal behavior of coated paper. These results indicate that latex which has higher Tg and lower gel content is the one of the main factors affecting aging behavior of coated paper.

• 한국추진공학회지
• /
• 제23권1호
• /
• pp.9-14
• /
• 2019

고체 추진기관의 HTPB 추진제는 저장소에서 저장소 환경에 따라 물리적, 화학적 노화가 진행된다. 추진기관 수명은 HTPB 추진제의 노화도에 의해 결정되며, 생산 초기에 점탄성 특성 및 노화 시험을 통해 예측된다. 본 논문에서는 생산 초기 물성 및 가속노화 시험을 통해 획득한 노화 물성과 장기 저장되어 자연 노화된 물성을 비교 분석하였다. 획득된 초기 및 노화물성 결과를 적용하여 중공형 그레인의 온도 하중에 의한 변형율을 분석하였다.

• Earthquakes and Structures
• /
• 제6권2호
• /
• pp.127-140
• /
• 2014

Laminated rubber bearing is very popular base isolation of earthquake engineering pertaining to the passive structural vibration control technologies. Rubber used in fabricating NRB and LRB can be easily attacked by various environmental factors such as oxygen, heat, light, dynamic strain, and organic liquids. Among these factors, this study carried out thermal aging test to investigate the effect of thermal aging on the mechanical properties of laminated rubber bearings in accelerated exposure condition of $70^{\circ}C$ temperature for 168 hours. The compressive-shear test was carried out to identify the variation of compressive and shear properties of the rubber bearings before and after thermal aging. In contrast to tensile strength and elongation tests, the hardness of rubber materials showed the increasing tendency dependent on exposure temperature and period. Based on the test results, the property changes of rubber bearing mainly aged by heat are quantitatively presented.