• Journal of Conservation Science
• /
• v.36 no.5
• /
• pp.306-314
• /
• 2020

The use of synthetic resins in ceramic restoration poses several challenges, including aging and potential damage to artifacts, which has raised the need to investigate new materials and restoration methods. This study set out to incorporate full color 3D printing into the 3D digital technology-based restoration method, an emerging approach currently being researched, and to print out missing parts with color information. After examining material physical properties with an experiment, the investigator printed out missing parts from a white porcelain vessel and grayish-blue-powdered celadon plate and compared them in chromaticity and brilliance. The experimental results show that the outputs had comparable tensile strength to the original restoration materials, whereas the recorded compressive strength was approximately 1.4~2 times higher than that of the original restoration materials. According to the NIST table of color difference values, the white porcelain vessel was visible at ΔE^*ab 1.55, and the grayish-blue-powdered celadon plate was perceivable at 3.34. Even though it was impossible to express the colors accurately owing to printer limitations, this non-contact approach reduced the possibility of damage to the minimum. In conclusion, it can be applied to objects with a high chance of damage or generate display effects through purposeful color differentiation in missing parts.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.102-102
• /
• 2018

Electronic industry had required the finer size and the higher performance of the device. Therefore, 3-D die stacking technology such as TSV (through silicon via) and micro-bump had been used. Moreover, by the development of the 3-D die stacking technology, 3-D structure such as chip to chip (c2c) and chip to wafer (c2w) had become practicable. These technologies led to the appearance of HBM (high bandwidth memory). HBM was type of the memory, which is composed of several stacked layers of the memory chips. Each memory chips were connected by TSV and micro-bump. Thus, HBM had lower RC delay and higher performance of data processing than the conventional memory. Moreover, due to the development of the IT industry such as, AI (artificial intelligence), IOT (internet of things), and VR (virtual reality), the lower pitch size and the higher density were required to micro-electronics. Particularly, to obtain the fine pitch, some of the method such as copper pillar, nickel diffusion barrier, and tin-silver or tin-silver-copper based bump had been utillized. TCB (thermal compression bonding) and reflow process (thermal aging) were conventional method to bond between tin-silver or tin-silver-copper caps in the temperature range of 200 to 300 degrees. However, because of tin overflow which caused by higher operating temperature than melting point of Tin ($232^{\circ}C$), there would be the danger of bump bridge failure in fine-pitch bonding. Furthermore, regulating the phase of IMC (intermetallic compound) which was located between nickel diffusion barrier and bump, had a lot of problems. For example, an excess of kirkendall void which provides site of brittle fracture occurs at IMC layer after reflow process. The essential solution to reduce the difficulty of bump bonding process is copper to copper direct bonding below $300^{\circ}C$. In this study, in order to improve the problem of bump bonding process, copper to copper direct bonding was performed below $300^{\circ}C$. The driving force of bonding was the self-annealing properties of electrodeposited Cu with high defect density. The self-annealing property originated in high defect density and non-equilibrium grain boundaries at the triple junction. The electrodeposited Cu at high current density and low bath temperature was fabricated by electroplating on copper deposited silicon wafer. The copper-copper bonding experiments was conducted using thermal pressing machine. The condition of investigation such as thermal parameter and pressure parameter were varied to acquire proper bonded specimens. The bonded interface was characterized by SEM (scanning electron microscope) and OM (optical microscope). The density of grain boundary and defects were examined by TEM (transmission electron microscopy).

• Journal of Biomedical Engineering Research
• /
• v.24 no.3
• /
• pp.203-208
• /
• 2003

The effect of indium on the microstructure and hardness of a Au-Pt-Cu ternary alloy was investigated using optical microscopy, differential scanning calorimeter, scanning electron microscopy x-ray diffractometry, electron probe microanalizer and vickers hardness tester. A hardness of the solution floated Au-Pt-Cu-0.5In quarternary alloy with 0.5 wt.% was reached a maximum value (162 Hv) in 30 min at 550$^{\circ}C$ in the range of 150 to 950$^{\circ}C$ but that of the alloy was rapidly increased until 30 min with increasing aging time at 550$^{\circ}C$ and after that was remained almost constant value. Also, the microhardness of the matrix Au-Pt-Cu ternary alloy aged at 550$^{\circ}C$ for 30 min was continuously increased with indium contents and the grain size of Au-Pt-Cu ternary alloy decreased as increased indium contents. Analyses of EPMA and XRD revealed that the matrix Au-Pt-Cu-In quarternary alloy is composed of fcc structure and intermetallic InPt$_3$ precipitate with Ll$_2$ structure. Based on this investigation, it can be concluded that an increase in microhardness of Au-Pt-Cu-In quarternary alloy is due to precipitation hardening InPt$_3$ and grain size refinement.

• Journal of Life Science
• /
• v.27 no.5
• /
• pp.536-544
• /
• 2017

Abeliophyllum distichum Nakai is deciduous shrubs of flowering plant in Oleaceae. It is important plant resources and consists of one species in the world. Also the endemic plant of A. distichum has been protected and designed endangered plant in Korea. For this reason, study on the immature seeds of A. distichum (ADS) hasn't progressed. In the present study, we evaluated the antioxidant activity and inhibitory effects on proteins and mRNA levels were related in the whitening effect in B16F10 cells. ADS was effective for reaction oxygen species (ROS). ROS causes various diseases such as aging, inflammation, cancer, and etc. Antioxidant properties were evaluated DPPH, ABTS radical scavenging activity and Reducing power. Plants were known that contained phenolic compounds were related in antioxidant activity. Phenolic compounds were phytochemicals commonly named natural polyphenols. These are secondary metabolites of plants involved in the defense against different types of stresses. In results, ADS suppressed the expression and transcription of Tyrosinase, TRP-1, TRP-2, and Microphthalmia-associated transcription factor (MITF). Tyrosinase, tyrosinase-related protein 1 (TRP-1), tyrosinase-related protein 1 (TRP-2) are known to play an important role in melanin biosynthesis. MITF regulated the expression and transcription of Tyrosinase, TRP-1, and TRP-2. In conclusion, ADS was effective in both antioxidant activities and whitening effects. Also, they were associated with the content of phenolic compounds. We suggested that ADS can be use antioxidants and skin-whitening functional cosmetics material derived from natural plant resources.

• Food Science and Preservation
• /
• v.22 no.3
• /
• pp.421-427
• /
• 2015

Oriental melon (Cucumis melo L. var. makuwa) has been widely consumed as various processed foods, such as dried products, jelly, wine, juice, and vinegar, in Asian countries. In fruit processing, blanching and pressure treatments affect its quality, such as antioxidant activities, sensory characteristics, and etc. This study was conducted to evaluate the effects of blanching and pressure pre-treatments on oriental melon wine-making (BP, blanching and pressure filtration; BNP, blanching and non-pressure filtration; NBP, non-blanching and pressure filtration; and NBNP, non-blanching and non-pressure filtration). Physicochemical properties and antioxidant capacities by ${\alpha}$, ${\alpha}$-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activity, ferric ion reducing antioxidant power (FRAP) assay, and total phenolic and total flavonoid contents were measured for comparison of the different pre-treatment methods. After the aging process, the alcohol contents and pH values showed no statistical differences, whereas the amount of soluble solids, reducing sugar, and titratable acidity were slightly different among the pre-treatments (p<0.05). The samples with blanching pre-treatment showed higher antioxidant capacities than those of other pre-treatments. In the sensory evaluation, the BNP was the best in overall acceptability. Thus, this study showed that the blanching treatment enhanced the antioxidant capacities and sensory qualities of the oriental melon wine.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.1
• /
• pp.98-104
• /
• 2014

Photovoltaic (PV) cell is considered as one of the finest ways to utilize the solar power. A study of improving solar cell's efficiency is important because the lifetime of solar cell is determined by photovoltaic module technology. Therefore, oxidation (and/or corrosion) of solder materials will be one of the primary yield and long-term reliability risk factor. Recently, the development of lead-free solder alloy has been done actively about lead-free solder alloys of the thermodynamic and mechanical properties. However, the oxidation behavior have rarely been investigated In this study, the oxidations of 60 wt% Sn-40 wt% Pb, 62 wt% Sn-36 wt% Pb -2 wt% Ag, 50wt% Sn-48 wt% Bi-2 wt% Ag alloys for the interconnect ribbon after exposure in atmosphere at $100^{\circ}C$ for several times were investigated. The wettability of 62 wt% Sn-36 wt% Pb-2 wt% Ag and 50 wt% Sn-48 wt% Bi-2 wt% Ag solders was also studied to compare with that of 60 wt% Sn-40 wt% Pb alloy. The results howed that the zero cross time and the wetting time of 50 wt% Sn-48 wt% Bi-2 wt% Ag solder were better than other two samples. The surface of tested samples was analyzed by XPS. The XPS result showed that in all samples, SnO grew first and then the mixture of SnO and $SnO_2$ was detected. $SnO_2$ grew predominantly for the long time aging. Moreover XPS depth profile analysis has found surface enrichment of tin oxide.

• 한국유가공학회:학술대회논문집
• /
• 2004.06a
• /
• pp.21-39
• /
• 2004

Fermented milks have been recognized as healthy foods since ancient times, but those using intestinal bacteria such as Bifidobacterium and lactic acid bacteria (LAB) are even more valuable from the standpoint of view of maintaining health. They have also now come to be recognized as important in the field of preventive medicine. Although advances in the medical sciences in the last 50 years have significantly increased the human lift span, an unfortunate fact is that many of us are now living long enough to experience chronic disorders such as coronary heart disease, hypertension, osteoporosis, diabetes and cancer. In recent years there has been renewed interest in health promotion and disease prevention by incorporating probiotic bacteria into foods to counteract harmful bacteria in the intestinal tract. Therefore, there are now a wide variety of commercial products containing prospective probiotics that claim health-promoting effects, such reductions in large botvel carcinogens and mutagens, antitumor properties, cholesterol-lowering effects, increased lactose digestion, relief from con-stipation, stimulation of immunocomponent cells and enhancement of phagocytosis. Two well-known representative probiotic is LAB and Bifidobaclerium. Traditional probiotic dairy strains of LAB which have been designated as GRAS (Generally Recognized As Safe) bacteria have a long history of safe use and most strains are considered comestible microorganisms with no pathogenic potential. Accordingly, there is considerable interest in extending the range of foods containing probiotic organisms from dairy foods to infant formulas, baby foods, and pharmaceuticals. In addition, the ingestion of probiotics, prebiotics, and symbiotic as wll as combinations of pro- and prebiotics has recently aroused renewed interest as enhancing the beneficial relationship between the host and intestinal microflora in both healthy and diseased indivisuals. Non-communicable chronic diseases such as cancer, cerebral hemorrhage, is chemic heart disease, and diabetes mellitus has recently been recognized as adult diseases in Japan as well as other countries. and are considered to be inevitably associated with aging. These diseases occur as a result of individual life styles. The Japanes Government. Ministry of Health, Labor and Welfare has proposed substituting the term 'adult diseases' with 'lifestyle-related diseases'. It has emphasized the importance of prevention rather than treatment. since the well-known increase in the elderly population in Japan is predicted to result in a variety of socioeconomic problems. n this lecture on the Present status of fermented milk products in Japan, I will report a strategy for the development of fermented milk products in Japan from the standpoint of view of research in Japan on LAB and Bifidobacteria. They could play an important role in preserving human health by controlling intestinal microflora capable of producing toxic effects on the host.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.33 no.3
• /
• pp.50-57
• /
• 2015

A traditional garden in Korea has diverse cultural, historical values, such as the then phases of the times, life phase, culture and art, etc. because it was developed on the basis of the harmony between nature and artificial structures. However, in reality, it's urgent to do efficient, continuous maintenance of traditional gardens which are being damaged and lost due to the problems like an owner's aging, inheritance, and lack of management, etc., especially in case of private property which was designated as a cultural property among such traditional gardens under the Cultural Properties Protection Law. Accordingly, this study conducted this research in a bid to use these research results as basic evidentiary materials for suggesting directivity in introduction of park planning of traditional gardens in folk houses in the near future by implementing the case investigation of transformation into public parks from traditional private gardens in Japan, which is putting the newly introduced park planning to efficient use, together with its systematic management, and the survey on domestic traditional gardens in folk houses status, as well as the hearing-based survey on a traditional gardens in folk houses owner's level of willingness to accept the introduction of parking planning. As a result, this study could confirm that in case of traditional gardens in Japan, they are mobilizing the revenue from admission fees for traditional gardens maintenance by incorporating the main entity of possession, and Japan is promoting transformation of traditional gardens into parks on the basis of use and preservation through the connection with local governments and research institutes. In addition, as a result of surveying domestic traditional gardens in folk houses, it was found that most of the garden owners had hardships in its management, and they were positive about systematic maintenance of gardens through park planning.

• Journal of the Korea Concrete Institute
• /
• v.22 no.1
• /
• pp.19-27
• /
• 2010

Aging and severe environments are major causes of damage in reinforced concrete (RC) structures such as buildings and bridges. Deterioration such as concrete cracks, corrosion of steel, and deformation of structural members can significantly degrade the structural performance and safety. Therefore, effective and easy-to-use methods are desired for repairing and strengthening such concrete structures. Various methods for strengthening and rehabilitation of RC structures have been developed in the past several decades. Recently, FRP composite materials have emerged as a cost-effective alternative to the conventional materials for repairing, strengthening, and retrofitting deteriorating/deficient concrete structures, by externally bonding FRP laminates to concrete structural members. The main purpose of this study is to investigate the effectiveness of adaptive neuro-fuzzy inference system (ANFIS) in predicting behavior of circular type concrete column retrofitted with FRP. To construct training and testing dataset, experiment results for the specimens which have different retrofit profile are used. Retrofit ratio, strength of existing concrete, thickness, number of layer, stiffness, ultimate strength of fiber and size of specimens are selected as input parameters to predict strength, strain, and stiffness of post-yielding modulus. These proposed ANFIS models show reliable increased accuracy in predicting constitutive properties of concrete retrofitted by FRP, compared to the constitutive models suggested by other researchers.

• Journal of the Korea Concrete Institute
• /
• v.24 no.2
• /
• pp.195-204
• /
• 2012

In the construction of high-rise buildings, bent re-bars are manually straightened to connect slabs to core-walls, which are usually cast before floor structures. During cold bending and straightening of re-bars, plastic deformation causing work hardening, Bauschinger effect and aging hardening is unavoidable. Tensile tests of coldly bent and straightened re-bars were conducted with test parameters of grade, diameter, and bend radius of re-bars as well as age between bending and straightening. Test results showed that proportional limits were lower and strain hardening occurred without yield plateaus. Inside and outside of re-bars with compression and tension deformations, respectively, during bending showed lower yield points due to Bauschinger effect and no yield plateaus due to work hardening, respectively. When re-bar grade was higher, yield point became significantly lower where Grade 400 re-bars had yield strengths lower than specified yield strength of 400 MPa. Because the surface of re-bar has higher strength than the core of re-bar, Bauschinger effect was more obvious for higher-grade re-bars. When age between bending and straightening was greater, yield strength increased and elongation decreased (i.e. embrittlement occurs). Using measured data, stress-strain relationship for straightened re-bars was developed based on Ramberg-Osgood model, which can be used to evaluate stiffness of joints when straightened re-bars are applied.