• Management & Information Systems Review
• /
• v.35 no.1
• /
• pp.235-251
• /
• 2016

The main purposes of this study is to examine the effect of treatment setting on patient participation, and the moderating effect of negative emotion between treatment setting and patient participation. For the purposes of this study's goals, the 320 samples for this empirical study were collected from the general hospital and medical clinic outpatients in C and carried out hierarchial regression by SPSS 19.0. The results of this study are as follows. There is positive effect of cleanness of the treatment setting on behavior factor in patient participation. The higher aging of patient have influences on emotional factor in patient participation. There are positive effects of the third person in treatment settings on emotional and informational factors in patient participation. There is negative effect of negative emotion on emotional and informational factors in patient participation. There are negative effects of time pressure in treatment settings on emotional and informational factors in Patient Participation. On interaction effect, there are positive effects of cleanness in treatment setting and negative emotion on emotional and informational factors in patient participation. Implications for theoretical and practical patient participation are discussed.

• Structural Engineering and Mechanics
• /
• v.42 no.4
• /
• pp.507-530
• /
• 2012

Age-related problems especially corrosion and fatigue are normally suffered by weatherworn ships and aging offshore structures. The effect of corrosion is one of the important factors in the Common Structural Rule (CSR) guideline of the ship design based on a 20 or 25 years design life. The aim of this research is the clarification of the corrosion effect on ultimate strength of stiffened panels on various types of double hull oil tankers. In the case of ships, corrosion is a phenomenon caused by the ambient environment and it has different characteristics depending on the parts involved. Extensive research considering these characteristic have already done by previous researchers. Based on this data, the ultimate strength behavior of stiffened panels for four double hull oil tankers such as VLCC, Suezmax, Aframax, and Panamax classes are compared and analyzed. By considering hogging and sagging bending moments, the stiffened panels of the deck, inner bottom and outer bottom located far away from neutral axis of ship are assessed. The results of this paper will be useful in evaluating the ultimate strength of an oil tanker subjected to corrosion. These results will be an informative example to check the effect of ultimate strength of a stiffened panel according to corrosion addition from CSR for a given type of ship.

• Korean Journal of Materials Research
• /
• v.25 no.8
• /
• pp.403-409
• /
• 2015

Metastable phase characteristics of beta Ti alloys were investigated to consider the relationship of the microstructure and diffraction pattern in TEM. TEM analysis showed that the microstructure was mottled as a modulated structure, and the diffraction pattern was composed of spot streaks between the main spots of a stable beta phase with a specific lattice relationship. The modulated structure may be induced by short distance slip or atom movement during a very short interval of solution treated and quenched (STQ) materials. The athermal ${\omega}$ phase, which could be precipitated at low temperature aging, is also analysed by the metastable phase. The metastable phases including athermal ${\omega}$ phase had a common characteristic of hardened and brittle behavior because the dislocation slip was restricted by a super lattice effect due to short distance atom movement at the metastable state.

• Korean Journal of Community Nutrition
• /
• v.5 no.2
• /
• pp.193-200
• /
• 2000

This study examined the experience and intention of health food use regarding the different type of health foods among 201 middle-aged Korean men form urban areas. Based upon the results of a prestudy, health foods were classified into 4 groups including Chinese medicine(CM), toner foods(TF), vitamin or mineral supplements(VMS), and other manufactured heath food supplements(MHFS). compared with the4 case of health food experience, the similar proportion of the subjects were intended to use CM( 70%) and MHFS( 40%), yet the smaller proportion of them had the intention for TF(46%) and VMS(52%). Our subjects mainly obtained information on CM and TF from social networks, such as families, relatives, friends and neighbors and VMS and MHFS from mass media. Expected effects of health food consumption were different by the type of health food. The most positive expected effects were found in CM, followed by VMS. However, there was weak evidence for the positive effects of the TF and MHFS. Upon the consumption of health foods, our subject appeared to expect to their body energy to increased and body functions to be improved in general. Multivariate analyses indicated the importance of expected effects of health food consumption and aging symptoms as determinants of future health food use. Experience was rarely associated with intention in health food use. This study suggests that educated middle-aged Korean men may have a rational attitude toward health food use. Regarding different attitudes and behavior toward the different type of health foods, further research should consider the nature of each type of health foods. The limitations of this study are also discussed.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.4 s.163
• /
• pp.584-593
• /
• 2007

Recently, the growing of the aging population by medical and science development, silver consumers were became new consumption market. The purposes of this study were to investigate the effects of service quality on consumer satisfaction and repurchase intention in the apparel store and hairdressing shop. Data were obtained from 853 women in the 50's and 60's who living in Busan. Data were analyzed by frequency analysis, factor analysis, Cronbach's alpha, 1-test, and path analysis using SPSS WIN 12.0. The results of the study were as follows: First, service qualities of apparel store were composed of Personal Service, Facilities Service, Product Service, and Policy Service. Service quality of hairdressing shop were consisted of Personal Service, Facilities Service, Skill Service, and Policy Service. Second, repurchasing intention was differently influenced by perceived store service quality and consumer satisfaction when purchasing apparel products and hairdressing services. Salesperson or hairdresser was the most important variable for silver consumers' satisfaction, which influenced the repurchase intention of apparels or hairdressing services. This research extends a domain of fashion market research from the product to the service. Additionally, this study provides an insight into silver fashion marketers and retailers for developing market strategies for silver common. Implications are drawn for the information useful to consumer behavior researchers and retailers of the silver fashion market.

• Steel and Composite Structures
• /
• v.29 no.4
• /
• pp.527-544
• /
• 2018

The paper presents the study on a change in modal parameters and structural stiffness of cable-stayed Fiberline Bridge made entirely of Glass Fiber Reinforced Polymer (GFRP) composite used for 20 years in the fjord area of Kolding, Denmark. Due to this specific location the bridge structure was subjected to natural aging in harsh environmental conditions. The flexural properties of the pultruded GFRP profiles acquired from the analyzed footbridge in 1997 and 2012 were determined through three-point bending tests. It was found that the Young's modulus increased by approximately 9%. Moreover, the influence of the temperature on the storage and loss modulus of GFRP material acquired from the Fiberline Bridge was studied by the dynamic mechanical analysis. The good thermal stability in potential real temperatures was found. The natural vibration frequencies and mode shapes of the bridge for its original state were evaluated through the application of the Finite Element (FE) method. The initial FE model was created using the real geometrical and material data obtained from both the design data and flexural test results performed in 1997 for the intact composite GFRP material. Full scale experimental investigations of the free-decay response under human jumping for the experimental state were carried out applying accelerometers. Seven natural frequencies, corresponding mode shapes and damping ratios were identified. The numerical and experimental results were compared. Based on the difference in the fundamental natural frequency it was again confirmed that the structural stiffness of the bridge increased by about 9% after 20 years of service life. Data collected from this study were used to validate the assumed FE model. It can be concluded that the updated FE model accurately reproduces the dynamic behavior of the bridge and can be used as a proper baseline model for the long-term monitoring to evaluate the overall structural response under service loads. The obtained results provided a relevant data for the structural health monitoring of all-GFRP bridge.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.217-220
• /
• 2009

Conductive adhesives have been investigated for use in microelectronics packaging as a lead-free solder substitute due to their advantages, such as low bonding temperature. However, high resistivity and poor mechanical behavior may be the limiting factors for the development of conductive adhesives. The metal fillers and the polymer resins provide electrical and mechanical interconnections between surface mount device components and a substrate. As metal fillers used in conductive adhesives, silver is the most commonly used due to its high conductivity and the stability. However the cost of conductive adhesives with silver fillers is much higher than usual lead-free solders and silver has poor electro-migration performance. So, copper can be a promising candidate for conductive filler metal due to its low resistivity and low cost, but oxidation causes this metal to lose its conductivity. In this study, electrically conductive adhesives (ECAs) using surface modified copper fillers were developed. Especially, in order to overcome the problem associated with the oxidation of copper, copper particles were coated with silver, and the silver-coated copper was tested as a filler metal. Especially the effect of silver coating on the electrical resistance just after curing and after aging was investigated. As a result, it was found that the electrical resistance of ECA with silver-coated copper filler was clearly lower and more stable than that of ECA with pure copper filler after curing process. And, during high temperature storage test, the degradation rate of electrical resistance for ECA with silver coated copper filler was quite slower than that for ECA with pure copper filler.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.1
• /
• pp.31-40
• /
• 1998

To predict residual stresses of aluminum ring rolls after quenching and element removal, 2-D and 3-D thermal elasto-plastic analyses were performed. Strains measured by three step sectioning method were directly compared to those analysed using ABAQUS's element removal. Numerical residual stresses after quenching had similar tendency to measured ones after 2 step aging, but the difference between numerical and measured ones was large. The difference is the reason why there are nonuniform residual stress distributions to ring height direction due to small height of ring, It is judged that the increase of ring height will improve the accuracy of measured ones and decrease the difference. By direct comparison between 3-D numerical strains to simulate three step sectioning method and measured ones, the accuracy of measurement and analysis can be improved. It is concluded that there can be predicted the deformation behavior on machining complex shaped large structures with residual stresses.

• Elastomers and Composites
• /
• v.33 no.4
• /
• pp.281-289
• /
• 1998

Tensile properties including Young's modulus and tear strength were measured for four different rubber compounds; natural rubber(NR), styrene-butadiene copolymer(SBR), ethylene-propylene diene monomer (EPDM), and brominated isobutylene-p-methyl-styrene copolymer(BIMS) as a function of temperature and degree of cure. To see the effect of over cure, a measurement was made of the tensile strength and swelling behavior of the over-cured rubber compounds. Young's modulus, E, was found to have linear dependency on the degree of cure for all rubber compounds. EPDM and BIMS showed the highest and lowest slopes, respectively. The slope of NR and SBR lay between EPDM and BIMS. Tear strength, Gc, decreased in the order of NR>BIMS>SBR>EPDM. As the cure time was extended the degree of cure of NR and SBR decreased, while that of BIMS increased. EPDM showed little change in the degree of cure.

• Korean Journal of Community Nutrition
• /
• v.26 no.5
• /
• pp.350-362
• /
• 2021

Objectives: This study investigated an association between sugar-sweetened beverage (SSB) intake and the dietary quality of adults in Deagu, Korea. Methods: A questionnaire survey was conducted in 1,022 adults aged 19 ~ 49 years (502 men and 520 women) in the Deagu area of Korea. Daily intake of SSB was obtained by the food frequency questionnaire, and the dietary quality was assessed using the nutrition quotient (NQ) for Korean adults. Multiple logistic regression analysis was used to estimate the association between dietary quality and daily intake of SSB in adults. Results: Daily intake of SSB was 463.6 mL/d for total subjects, and the highest intakes were sweetened coffees (192.7 mL/d), followed by carbonated drinks (77.1 mL/d). Higher intake of SSB was associated with higher intake frequency of fast food or sweet and greasy bread, processed beverage, ramyon, eating out or delivery food and night snack, and also associated with lower frequency of water, breakfast intake and nutrition label checking in men or women. Men and women who had a higher intake SSB had significantly greater odds for being in the low grade of NQ (P for trend = 0.0006 for men, P for trend = 0.0007 for women), especially in the moderation factor (P for trend < 0.0001 for men and women). Conclusions: This study showed that high SSB intake was significantly associated with low dietary quality among adults. These study results suggest that nutrition education programs and guidelines should be provided to adults for improving their consumption of SSB and related diets.