• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.7
• /
• pp.3494-3510
• /
• 2019

Wireless sensor networks encounter energy saving as a major issue as the sensor nodes having no rechargeable batteries and also the resources are limited. Clustering of sensors play a pivotal role in energy saving of the deployed sensor nodes. However, in the cluster based wireless sensor network, the cluster heads tend to consume more energy for additional functions such as reception of data, aggregation and transmission of the received data to the base station. So, careful selection of cluster head and formation of cluster plays vital role in energy conservation and enhancement of lifetime of the wireless sensor networks. This study proposes a new mutation chemical reaction optimization (MCRO) which is an algorithm based energy efficient clustering protocol termed as MCRO-ECP, for wireless sensor networks. The proposed protocol is extensively developed with effective methods such as potential energy function and molecular structure encoding for cluster head selection and cluster formation. While developing potential functions for energy conservation, the following parameters are taken into account: neighbor node distance, base station distance, ratio of energy, intra-cluster distance, and CH node degree to make the MCRO-ECP protocol to be potential energy conserver. The proposed protocol is studied extensively and tested elaborately on NS2.35 Simulator under various senarios like varying the number of sensor nodes and CHs. A comparative study between the simulation results derived from the proposed MCRO-ECP protocol and the results of the already existing protocol, shows that MCRO-ECP protocol produces significantly better results in energy conservation, increase network life time, packets received by the BS and the convergence rate.

• Korean Journal of Materials Research
• /
• v.33 no.12
• /
• pp.517-524
• /
• 2023

BaTiO₃-Poly vinylidene fluoride (PVDF) solution was prepared by adding 0~25 wt% BaTiO₃ nanopowder and 10 wt% PVDF powder in solvent. BaTiO₃-PVDF film was fabricated by spreading the solution on a glass with a doctor blade. The output performance increased with increasing BaTiO₃ concentration. When the BaTiO₃ concentration was 20 wt%, the output voltage and current were 4.98 V and 1.03 ㎂ at an applied force of 100 N. However, they decreased when the over 20 wt% BaTiO₃ powder was added, due to the aggregation of particles. To enhance the output performance, the generator was poled with an electric field of 150~250 kV/cm at 100 ℃ for 12 h. The output performance increased with increasing electric field. The output voltage and current were 7.87 V and 2.5 ㎂ when poled with a 200 kV/cm electric field. This result seems likely to be caused by the c-axis alignment of the BaTiO₃ after poling treatment. XRD patterns of the poled BaTiO₃-PVDF films showed that the intensity of the (002) peak increased under high electric field. However, when the generator was poled with 250 kV/cm, the output performance of the generator degraded due to breakdown of the BaTiO₃-PVDF film. When the generator was matched with 800 Ω resistance, the power density of the generator reached 1.74 mW/m². The generator was able to charge a 10 ㎌ capacitor up to 1.11 V and turn on 10 red LEDs.

• Korean Chemical Engineering Research
• /
• v.47 no.4
• /
• pp.488-494
• /
• 2009

Zeolite 4A was prepared by new synthesis method, 2-step crystallization, for enhancement of oil absorption capacity. Vietnamese sand and $NaAlO_2$ solution from natural bauxite were used as raw materials in stead of conventional cullet and $Al(OH)_3$ to reduced the processing cost. Some dissolved organics in $NaAlO_2$ solution were removed by activated carbon. Synthetic method was progressed by 1) reacting the raw materials at $55^{\circ}C$, 4 hr with the ratio of Si/Al to 1.15, and 2) reacting at $65^{\circ}C$, 5 hr with reducing the ratio of Si/Al to 0.98. New method can easily control the particle size, aggregation, surface polarity, and enhanced the whiteness of the products. The prepared zeolite 4A shows excellent oil absorption capacity(O.A.C>50 ml/100 g) as well as equal value with calcium ion exchange capacity, and proves the 2-step crystallization is the economic and effective process for the preparation of zeolite 4A.

• Asia pacific journal of information systems
• /
• v.19 no.1
• /
• pp.63-82
• /
• 2009

Virtual community is a social aggregation to attain some goals in an IT-supported virtual space (Lee et al., 2002). As lots of virtual communities generate robust and reliable outputs with low control and low incentive, previous researchers was interested in the questions, "why do they participate?" or "how are they controlled?". But. as Katz (1964) said, the most important part of the high-performing organization is the behaviors of members in the organization. Therefore, this research is to examine the relationship between the performance and the behaviors of participants in the virtual community. First, we propose 6 types of behaviors related to high performance in the virtual community: 'Continuous Attendance', 'Complying with the organizational value, policies, and regulations', 'Protection', 'Suggestion for the improving', 'Self-training', and 'Favorable behavior'. The six types of behaviors are extracted from the framework of Katz (1964) and Brief and Motowidlo (1986). The reason why each behavior is positively related with high-performance is that those who continuously attend have more responsibility than temporary participants do; complying with the rules of a virtual community means that they may make more reliable outcome; 'Protection' is one of the prosocial-behaviors and those who protect the community may concern the benefit of the virtual community when they participate: those who suggest some ideas for improvement may contribute to the virtual community; 'Self-training' behavior means that participants really want to have high quality in their contribution: those who have 'Favorable attitude' consider other members in the virtual community when they participate. Then, we perform an empirical analysis with the survey from participants in the Knowledge service of Naver.com, to show those behaviors are associated with the high-performance. To make the measurement for the six behaviors, we use CVR (content validity ratio) method (Lawshe, 1975), interviewing 12 experts. The dependent variable, performance of participation, is measured by 'ratio of selected answer' given by the Naver.com. We use email survey. We sent 1200 emails to randomly selected participants in the knowledge service and received 282 responses. The results of our empirical analysis show that 4('Continuous Attendance', 'Suggestion for the improving', 'Self-training', 'Favorable attitude') are positively related to the performance, but 2('Complying with the organizational value, policies, and regulations' and 'Protection') are not significant. In line with Fitzgerald (2006), we expect that participants in the virtual community may behave similarly to employees in the off-line firms for the high performance. But 2 behaviors have different results. The reason that the 'Complying with the organizational value' behavior is not sufficiently related to performance is that the motivation of participants is more related to intrinsic pleasure or altruism than external reward. Also, the 'Protection' behavior has no significant relationship with performance, which means that the high-performing participants have little concern about the problems in the community.

• Applied Chemistry for Engineering
• /
• v.34 no.2
• /
• pp.111-120
• /
• 2023

The nucleation mechanism was studied using a calcium ion selective electrode (Ca ISE) to observe the formation of CaCO₃, a representative mineral in the CO2 cycle, and to analyze the effect of the Mg/Ca-ratio and temperature on the formation of pre-nucleation cluster (PNC) and CaCO₃. As a result of the experiment, a small amount of crystal was formed. Energy dispersive X-ray spectroscopy (EDS) was used for surface element analysis, and a field emission scanning-electron microscope (FE-SEM) was used for the morphology analysis of synthesized carbonates. These results showed that various shapes of crystalline CaCO₃ (calcite, aragonite, etc.) were observed for each Mg/Ca ratio and temperature. In addition, the calibration plot obtained from Ca ISE showed information on the formation process of CaCO₃. Our results showed that as magnesium ions interfered with the binding of calcium and carbonate ions and delayed the aggregation between PNCs, the nucleation and formation of CaCO₃ were delayed. On the other hand, the temperature showed an opposite trend as compared to the effect of magnesium under our experimental conditions, indicating that temperature accelerated the formation of CaCO₃. Furthermore, the morphology of CaCO₃ clearly changed according to the Mg/Ca ratio and temperature, and it was confirmed that the two factors are very important for CaCO₃ formation in that they could affect the overall process.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.4 no.3 s.8
• /
• pp.33-43
• /
• 2005

Traffic condition monitoring system serves as the foundation for all intelligent transportation system operation. Loop detectors and Video Image Processing are the most widely common technology approach to condition monitoring in korea Highways. Lane Usage is defined as the proportion of total link volume served by each lane. In this research, the lane Usage(LU) of two lane link for one day. Interval is 56% : 44%. The LU of three lane link is 39% : 37% : 24%. The LU of four lane link is 25% : 29% : 26% : 21%. These analysis reveal that each lane distributions of link are not same. This research investigates the general concept of lane usage by using collected loop detector data and the investigated that lane distribution is different by traffic lane and lane usage is consistent by time of day.

• Korean Journal of Food Science and Technology
• /
• v.51 no.6
• /
• pp.531-536
• /
• 2019

In this study, the optimization of the manufacturing process for the oil-in-water emulsification of rice bran oil was performed by response surface methodology (RSM) using varying amounts of the emulsifier (0.05-0.25%), varying rotation speeds of the homomixer (4,000-8,000 rpm), and varying water to oil ratios (0.8-1.6%) as independent variables, and the emulsion stability index (ESI) as the dependent variable. The optimization conditions predicted by the RSM model were 0.2%g of the total amount of the rice bran oil emulsion, emulsified at the homomixer rotation speed of 6,700 rpm using a water to oil ratio of 1:3. The ESI of the rice bran oil emulsion prepared under the optimized conditions was 95.7%, which was similar to the predicted value of 94.4% obtained by the RSM model. The transmission stability and the backscattering values were found to agree with each other over time and the turbiscan stability index was less than 0.7, indicating that the aggregation and upper floatation were less while the dispersion stability was maintained.

• Applied Biological Chemistry
• /
• v.36 no.5
• /
• pp.364-369
• /
• 1993

Triton X-100 enhances to a marked extent the analytical sensitivity of the nitrobluetetrazolium (NBT) reduction method for the assay of superoxide$(O^-_{\.{^.2}})$ production. In the present work, it was attempted to elucidate the physicochemical nature of this Triton X-100 effect, focusing on not only the surfactant-caused stabilization of the water-insoluble formazan colloid but also the kinetic competition between the $NBT-O^-_{\.{^.2}}$ reaction and the autodisproportionation of concommitantly occuring in aqueous media. The measurements of formazan and $H_2O_2$ formed in a number of reaction systems, as prepared by vortex-mixing potassium superoxide dissolved in an aprotic solvent with aqueous solutions of NBT, revealed that Triton X-100 exerts its effect both through preventing formazan colloid from aggregation and thereby increasing the formazan absorbance and through suppressing the autodisproportionation reaction of $O^-_{\.{^.2}}$. It also turned out that the relative shares of the colloid stabilization effect and the kinetic effect in the contribution to the sensitivity amplification of the NBT method are dependent upon the reaction conditions, particulary the molar concentration ratio of NBT to $O^-_{\.{^.2}}$ in the reaction systems.

• Journal of The Korean Association For Science Education
• /
• v.40 no.4
• /
• pp.359-374
• /
• 2020

This study is a complex type consisting of survey study and self-study. The former investigated elementary teachers' epistemological beliefs on convergence knowledge and teaching. As a representative of the result of survey study I, as a teacher as well as a researcher, was the participant of the self-study, which investigated my epistemological belief on convergence knowledge and teaching and my execution of convergent science teaching based on family resemblance of mathematics, science, and physical education. A set of open-ended written questionnaires was administered to 28 elementary teachers. Participating teachers considered convergent teaching as discipline-using or multi-disciplinary teaching. They also have epistemological beliefs in which they conceived convergence knowledge as aggregation of diverse disciplinary knowledge and students could get it through their own problem solving processes. As a teacher and researcher I have similar epistemological belief as the other teachers. During the self-study, I tried to apply convergence knowledge system based on the family resemblance analysis among math, science, and PE to my teaching. Inter-disciplinary approach to convergence teaching was not easy for me to conduct. Mathematical units, ratio and rate were linked to science concept of velocity so that it was effective to converge two disciplines. Moreover PE offered specific context where the concepts of math and science were connected convergently so that PE facilitated inter-disciplinary convergent teaching. The gaps between my epistemological belief and inter-disciplinary convergence knowledge based on family resemblance and the cases of how to bridge the gap by my experience were discussed.

• Korean journal of applied entomology
• /
• v.48 no.1
• /
• pp.59-65
• /
• 2009

This study was conducted to determine pheromone trap type and height in forecasting populations of R. clavatus in soybean fields using pheromone. The most effective pheromone trap type and height in forecasting populations of R. clavatus were fish trap and 60 cm above ground. Ratio of R. clavatus adults female and male in soybean field was 1.5 to 1 and Piezodorus hybneri was also attracted to the aggregation pheromone trap of R. clavatus. Attractiveness of two stink bug species caught on synthesis pheromone of R. clavatus was surveyed with imported production and synthesized production. Imported pheromone attracted only adult of R. clavatus, but synthesized pheromone attracted both adult of R. clavatus and P. hybneri. Change of population of R. clavatus was observed using pheromone trap and sweeping method in soybean field. Adults of R. clavatus occurred from early August and the population reached its peak in early September when pheromone trap was used. In case of sweeping method, its fluctuation pattern was similar to that of pheromone trap.