• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.211-212
• /
• 2011

It was very important to evaluate concrete experimentally at elevated temperature because concrete was filled with aggregate of concrete volume about 70 percent. Concrete exposure to high temperatures produces changes in its internal structure, for instance loss of its strength and deformation capacity, in extreme cases risking the service life of the structure. The work of this paper is performed to evaluate the thermal behavior of ultra-high strength concrete having different water to cement ratio (strength), fine aggregate to aggregate ratio and maximum size of coarse aggregate. For exposure to 500℃ during 1 hour, residual mechanical properties of the ultra-high strength concrete decreased as the s/a ratio decreases and the maximum size of coarse aggregate increases.

• Steel and Composite Structures
• /
• 제45권3호
• /
• pp.369-388
• /
• 2022

Composite effect between steel and recycled aggregate concrete (RAC) in steel reinforced-RAC (SRRAC) structures can effectively improve RAC's adverse mechanical properties due to the natural defects of recycled coarse aggregate (RCA). However, the performance of SRRAC after thermal exposure will have a great impact on the safety of the structure. In this paper, firstly, the mechanical properties of SRRAC structures after high temperatures exposure were tested, including 24 SRRAC columns and 32 SRRAC beams. Then, the change rules of beams and columns performance with the maximum temperature and replacement percentage were compared. Finally, the formulas to evaluate the residual bearing capacity of SRRAC beams and columns after exposure to high temperatures were established. The experimental results show that the maximum exposure temperature can be judged by the apparent phenomenon and mass loss ratio of RAC. After high temperatures exposure, the mechanical properties of SRRAC beams and columns change significantly, where the degradation of bearing capacity and stiffness is the most obvious. Moreover, it is found that the degradation degree of compression member is more serious than that of flexural member. The formulas of residual bearing capacity established by introducing influence coefficient of material strength agree well with the experimental results.

• 콘크리트학회논문집
• /
• 제23권4호
• /
• pp.431-440
• /
• 2011

콘크리트 구조물은 화재에 노출시 고온에 의해 내부 구조가 변화하며 보유하고 있는 강도와 변형 성능이 저하되어 최종적으로 수명이 단축하게 된다. 그 성능 저하 수준은 도달된 온도, 고온에 노출된 시간, 콘크리트의 배합, 골재의 특성 및 콘크리트 자체의 특성 등에 의해 결정된다. 이 연구는 물시멘트비, 잔골재율 및 굵은 골재의 최대 크기등의 변수에 대한 초고강도 콘크리트의 열적 거동을 평가하기 위해 실시되었다. 상온 및 $500^{\circ}C$의 온도에 대하여 초음파 속도, 동탄성 계수, 정탄성 계수 및 압축강도 시험은 ${\varnothing}100{\times}200\;mm$ 원주형 콘크리트 시험체를 사용하여 실시되었다. 결과로서 $500^{\circ}C$의 온도에서 가열된 초고강도 콘크리트의 잔존 역학적 특성은 물결합재비, 잔골재율 및 굵은 골재 최대 치수의 변화에 영향을 받는 것으로 나타났다.

• Structural Engineering and Mechanics
• /
• 제76권4호
• /
• pp.513-528
• /
• 2020

This paper presents the results of an experimental study on the residual behavior of reinforced recycled aggregate concrete (RRAC) beam-columns after exposure to elevated temperatures. Two parameters were considered in this test: (a) recycled coarse aggregate (RCA) replacement percentages (i.e. 0, 30, 50, 70 and 100%); (b) high temperatures (i.e. 20, 200, 400, 600, and 800℃). A total of 25 RRAC short columns and 32 RRAC beams were conducted and subjected to different high temperatures for 1 h. After cooling down to ambient temperature, the following basic physical and mechanical properties were then tested and discussed: (a) surface change and mass loss ratio; (b) strength of recycled aggregate concrete (RAC) and steel subjected to elevated temperatures; (c) bearing capacity of beam-columns; (d) load-deformation curve. According to the test results, the law of performance degradation of RRAC beam-columns after exposure to high temperatures is analyzed. Finally, introducing the influence coefficient of RCA replacement percentage and high temperatures, respectively, to correct the calculation formulas of bearing capacity of beam-columns in Chinese Standard, and then the residual bearing capacity of RRAC beam-columns subjected elevated temperatures is calculated according to the modified formulas, the calculated results are in good agreement with the experimental results.

• 한국건축시공학회지
• /
• 제15권2호
• /
• pp.169-175
• /
• 2015

본 연구는 콘크리트 마감재로써 골재노출 콘크리트를 개발하기 위한 일련의 실험이다. 실험변수로는 고강도 및 일반강도의 물-시멘트비별 당류계 지연제의 살포량 및 세척시기 변화가 물씻기 공법을 이용한 골재노출 콘크리트의 품질에 미치는 영향을 분석하였다. 그 결과, 물-시멘트비 25%는 세척시점 0.75일, 물-시멘트비 35%와 55%는 1일, 65%는 1.5일에 당류계 지연제를 $24m{\ell}/m^2$ 살포하였을 때 가장 효과적이며 양호한 골재 노출의 표면이 연출되는 것을 확인할 수 있었다.

• 한국재난정보학회 논문집
• /
• 제6권1호
• /
• pp.78-90
• /
• 2010

Exposure to the outside, the concrete is differential moisture distribution depending on the depth. Such a differential moisture distribution causes the differential drying shrinkage in concrete structures. This thesis is researched to compare the shrinkage of lightweight concrete depending on depth to normal concrete. It is used artificial lightweight aggregate which has 20% of pre-absorb value by lightweight concrete. When water-binder ratio is 30%, average shrinkage of lightweight concrete section decreased than normal concrete, but differential shrinkage of lightweight concrete section increased. However water-binder ratio is 40% and 50% average shrinkage and differential shrinkage of lightweight concrete section decreased than normal concrete.

• 콘크리트학회논문집
• /
• 제20권6호
• /
• pp.773-784
• /
• 2008

동의 제련과정에서 생성되는 동슬래그의 건설용 골재 활용이 국내에서도 2004년부터 가능하게 되었으나, 현재까지 장기적인 안정성 즉, 내구성에 대한 충분한 판단자료가 미흡하여 실용화를 저해하는 한 요인으로 작용하고 있다. 본 연구에서는 동슬래그를 천연모래 (잔골재)의 부분 치환재로 사용한 콘크리트의 내구적 특성을 18 MPa 및 27 MPa급 상용 콘크리트에 대해 촉진 및 폭로 실험을 수행하여 규명하고, 이를 통해 동슬래그 콘크리트의 실용화를 가속시키기 위한 토대를 마련하고자 하였다. 실험결과, 동슬래그 30% 치환조건에서는 대부분의 천연모래를 사용한 배합과의 내구특성 차이가 크지 않은 것으로 나타났으며, 부순모래를 사용한 경우는 대체로 50% 치환조건과 유사한 것으로 확인되었다. 특히 8년간 진행된 폭로실험 결과에서도 천연모래만을 사용한 경우와 대비하여 동등한 정도의 내구성을 확보함은 물론, 저품위인 18 MPa 콘크리트의 경우에도 피복두께 20 mm까지 중성화에 도달하는 수명을 50년 이상 확보할 수 있음을 알 수 있었다.

• Steel and Composite Structures
• /
• 제44권3호
• /
• pp.309-324
• /
• 2022

The post-fire elastic stiffness and performance of concrete-filled steel tube (CFST) columns containing recycled aggregate concrete (RAC) has rarely been addressed, particularly in terms of material properties. This study was conducted with the aim of assessing the modulus of elasticity of recycled aggregate concrete-filled steel tube (RACFST) stub columns following thermal loading. The test data were employed to model and assess the elastic modulus of circular RACFST stub columns subjected to axial loading after exposure to elevated temperatures. The length/diameter ratio of the specimens was less than three to prevent the sensitivity of overall buckling for the stub columns. The gene expression programming (GEP) method was employed for the model development. The GEP model was derived based on a comprehensive experimental database of heated and non-heated RACFST stub columns that have been properly gathered from the open literature. In this study, by using specifications of 149 specimens, the variables were the steel section ratio, applied temperature, yielding strength of steel, compressive strength of plain concrete, and elastic modulus of steel tube and concrete core (RAC). Moreover, parametric and sensitivity analyses were also performed to determine the contribution of different effective parameters to the post-fire elastic modulus. Additionally, comparisons and verification of the effectiveness of the proposed model were made between the values obtained from the GEP model and the formulas proposed by different researchers. Through the analyses and comparisons of the developed model against formulas available in the literature, the acceptable accuracy of the model for predicting the post-fire modulus of elasticity of circular RACFST stub columns was seen.

• 한국산학기술학회논문지
• /
• 제14권8호
• /
• pp.4033-4038
• /
• 2013

건설공사 현장에서 발생하는 버럭 중 퇴적암은 대부분 야적, 매립 등으로 폐기하고 있어 공사비의 증대 및 시공 비효율화의 원인이 되고 있다. 이 중 일부 사암의 경우 선별하여 골재로 활용하기도 하지만, 셰일은 대부분 산업폐기물로 매립하고 있는 실정이다. 이에 본 연구에서는 대경권의 골재수급 안정화 및 콘크리트용 대체골재 자원 개발의 일환으로 대경권에 널리 분포하고 있는 셰일 골재의 풍화특성을 평가하였으며, 셰일 골재의 치환율 변화에 따른 콘크리트의 동결융해 특성을 평가하였다. 실험에 사용된 셰일은 대구시 터파기 공사현장에서 반출되는 레드셰일과 블랙셰일을 선정하였으며, 콘크리트용 굵은 골재로 널리 사용되는 안산암과 변성퇴적암의 일종인 혼펠스와 비교함으로써 셰일의 콘크리트용 골재 활용성을 검토하였다. 실험결과, 안산암과 혼펠스의 경우 시간 경과에 따른 열화현상이 발견되지 않았으나, 블랙셰일은 모암의 일부가 박리되는 현상이 발견되었다. 레드셰일은 직접 폭로 1.5개월 경과 후 층리의 방향에 따라 균열이 발생하기 시작하였으며, 약 4개월 경과 후 잘게 부수어지는 현상이 나타났다. 셰일 골재 치환율에 따른 제조한 콘크리트의 300 cycle 동결융해 반복 후 상대동탄성계수는 Plain에서 97%, Hornfels는 95%로 나타났으며, RS_100의 경우 반복횟수 210 Cycle에서 57%, BS_100의 경우 반복횟수 240 Cycle에서 상대동탄성계수가 54%로 나타나 셰일 골재를 사용한 콘크리트의 동결융해 저항성이 반복횟수 증가에 따라 급격히 감소하는 것으로 나타났다.

• Steel and Composite Structures
• /
• 제41권5호
• /
• pp.731-746
• /
• 2021

The purpose of this paper is to investigate the axial bearing capacity and residual properties of steel reinforced recycled aggregate concrete (SRC) column after elevated temperature. A total of 48 SRC columns were designed for the static loading test after elevated temperature. The variables include replacement ratios, designed temperature, target duration, thicknesses of cover concrete, steel ratios and stirrup spacing. From this test, the mass loss ratio and stress load-deformation curve were obtained, and the influence of various parameters on residual bearing capacity were analyzed. ABAQUS was used to calculate the temperature field of specimens, and then got temperature damage distribution on the cross-section concrete. It was shown that increasing of the elevated temperatures leaded to the change of concrete color from smoky-gray to grayish brown and results in reducing the bearing capacity of SRC columns. The axial damage and mechanism of SRC columns were similar to those of reinforced natural aggregate concrete columns at the same temperatures. Finally, the calculation method of axial compressive residual bearing capacity of SRC columns recycled concrete columns after high temperature was reported based on the test results and finite element analysis.