• Research in Plant Disease
• /
• v.10 no.4
• /
• pp.319-323
• /
• 2004

This study was conducted to investigate the effect of U. atrum treatment on control of Botrytis leaf blight of lily and Botrytis gray mold of cucumber, and to evaluate the U. atrum as the biological control agent of Botrytis diseases. The antagonistic isolates CNU 9037 and CNU 9054 isolated from tomato leaves were identified as Ulocladium atrum Preuss based on morphological characteristics. This is the first record of U. atrum in Korea. In bioassays on dead leaves of tomato and cucumber, treatment of U. atrum colonized the dead leaves and suppressed sporulation of Botrytis as compared with the untreated control. The suppression of spoulation of Botrytis on dead leaf segments by U. atrum was higher when U. atrum was treated before Botrytis was treated. The effect of treatments with conidial suspension of U. atrum on leaf blight of lily and gray mold of cucumber caused by Botrytis elliptica and B. cinerea, respectively, was investigated under greenhouse conditions. Spraying U. atrum ($1{\times}10^6$ conidia per ml) at intervals of 1 week for three times resulted in a significant reduction of natural infections of lily leaves caused by B. elliptica. Protective value of U. atrum treatment was higher than that of the fungicide (procymidone) treatment. Spraying U. atrum also resulted in a significant reduction of cucumber gray mold caused by B. cinerea. Our results show that U. atrum has a potential for biological control against diseases caused by Botrytis spp, in lily and cucumber.

• Journal of Wetlands Research
• /
• v.25 no.3
• /
• pp.184-195
• /
• 2023

To develop an effective management plan for Ambrosia trifida L., an invasive alien plant in Korea, we assessed the potential of Ophraella communa LeSage as a biological control agent. This involved investigating the host specificity of the herbivore Ophraella communa LeSage, its annual travel distance, and the impact of this insect on the fitness of Ambrosia trifida L. We confirmed the host plant preference of Ophraella communa LeSage. The travel distance of this insect was determined by monitoring its appearance in selected Ambrosia trifida L. communities without these insects at distances of 10, 20, 30, and 100 meters, based on the locations where the presence of Ophraella communa LeSage was observed. The growth, reproductive, and physiological responses of Ambrosia trifida L. were measured according to feeding by Ophraella communa LeSage. As a result, Ophraella communa LeSage fed on only three taxa and moved short distances within a radius of 30 m per year from the host. The feeding behavior of the herbivore had a negative impact on the growth, reproductive, and physiological responses of Ambrosia trifida L. And the plant's growth and reproduction improved with increasing distance from the herbivore. Furthermore, the introduction of herbivores was able to control over 90% of Ambrosia trifida L. when the coverage of the Ambrosia trifida L. group was below 50%. However, the effectiveness of the removal decreased when the coverage exceeded 90%. These results are likely to be utilized by Ophraella communa LeSage as an ecological control agent. It is advantageous to introduce them in spring (May) when the coverage is low to maximize the effectiveness of control.

• The Korean Journal of Mycology
• /
• v.40 no.2
• /
• pp.118-123
• /
• 2012

In order to develop environment friendly fungicide for the control of citrus green mold (Penicillium digitatum) using endophytic bacteria, the 21 bacterial isolates were isolated from citrus leaves in seven different orchards in Jeju Province. Among the 21 bacterial isolates, 5 bacterial isolates presented antifungal activity against green mold pathogen P. digitatum. The CB3 isolate, which showed the most strong antagonistic effect, was selected through opposite culture against the pathogen. The rod-shaped, gram-positive bacterium CB3 was identified as Bacillus velezensis based on morphological, physiological characteristics, 16S rDNA, and gyr A gene sequence analysis. The isolate CB3 showed strong antifungal activity against two citrus postharvest pathogen P. digitatum. Citrus fruits were treated by wound inoculation with P. digitatum pathogen, and the control efficacy of CB3 culture broth was 66.7% ($1{\times}10^8$ cfu/ml). In conclusion, The stability of CB3 and its strong antifungal activity also lead us to believe that it has potential for application as an environment friendly biological control agent.

• Journal of Environmental Science International
• /
• v.29 no.3
• /
• pp.229-240
• /
• 2020

This study was conducted to evaluate the effect of phosphorus acid (H₃PO₃) addition to the horticultural bed soil on the initial growth of red pepper (Capsicum annuum L. cv.), cucumber (Cucumis sativus L. cv.), and kimchi cabbage (Brassica campestris L. ssp. pekinensis (Lour.) Rupr. cv.). The stem heights of red pepper and cucumber were 46.1% and 23.0% greater in the 50 mg/L of phosphorus acid treatment than the untreated (control). Further, the stem diameter of pepper and cucumber were 48.7% and 23.0% greater in the 50 mg/L of phosphorus acid treatment than the control. In addition, the number of kimchi cabbage leaves was 47.5% greater in the 50 mg/L of phosphorus acid treatment than the control. The dry weights of red pepper, cucumber and kimchi cabbage were 72.9%, 16.5%, and 30.4% heavier in the 50 mg/L than the control, respectively. Cations (K, Ca, and Mg) and total phosphorus (T - P) were quantitatively analyzed for these three horticultural crops. The concentrations of K, Ca, and Mg, and T - P were higher in the 50 mg/L of phosphorus acid than the control, respectively. Based on the results obtained in this study, it appears that treatment of phosphorus acid in horticultural bed soil enhanced the growth of red pepper, cucumber and Kimchi cabbage.

• Journal of KIISE
• /
• v.42 no.3
• /
• pp.320-327
• /
• 2015

Although service robots in various fields are being commercialized, most of them have problems that depend on explicit commands by users and have difficulty to generate robust reactions of the robot in the unstable condition using insufficient sensor data. To solve these problems, we modeled mirror neuron and theory of mind systems, and applied them to a robot agent to show the usefulness. In order to implement quick and intuitive response of the mirror neuron, the proposed intention-response model utilized behavior selection networks considering external stimuli and a goal, and in order to perform reactions based on the long-term action plan of theory of mind system, we planned behaviors of the sub-goal unit using a hierarchical task network planning, and controled behavior selection network modules. Experiments with various scenarios revealed that appropriate reactions were generated according to external stimuli.

• Journal of Aquaculture
• /
• v.11 no.3
• /
• pp.285-294
• /
• 1998

When Cochlodinium polykrikoides came into the culture tanks through influent cultivated water during the red tides, hundred thousands of commercial flounders were concomitantly killed and many culturists suffered from a great deal of financial loss in the east coast of Korea. It is charactrized by high sinking rate after sunset and the formatino of clump which results in oxygen deficiency by its respiration at tank bottom under condition. We investigated the efficacy of hydrogen peroxide and chlorine dioxide, known to form radicals, for extermination of red tide organism C. polykrikoides. When C. polykrikoides seawater with a density of 6,000 cells/$m\ell$ was treated with 14, 28 and $42mg/\ell$ of hydrogen peroxide, its survival rate was markedly decreased to 9.8, 0.8 and 0.3% respectively immediately after 6 hours of treatments whereas when it was treated with 1.5, 2.1 and $3.0mg/\ell$ chlorine dioxide, its survival rate showed 87.7, 81.3 and 80.1 and 80.1% respectively at the same treatment time. Hydrogen peroxide was the effective agent since it has scarcely injured the cultured olive flounder when exposed to the tested concentration range of $14~28mg/\ell$ with the extermination of almost3 C. polykrikoides during the experimental period of 5 days and has shown the oxygen increase of approximately $1.23mg/\ell$ 2 hours immediately after the flounder by C. polykrikoides in the land-based culture tank is assumed to be not by the toxicity of itself but by oxygen dificiency from the rapid respiration of dinoflagellate clump sunken to the tank bottom.

• Journal of Internet Computing and Services
• /
• v.9 no.2
• /
• pp.83-88
• /
• 2008

Session initiation protocol (SIP) is an application-layer prolocol to initiate and control multimedia client session. When client ask to use a SIP service, they need to be authenticated in order to get service from the server. Authentication in a SIP application is the process in which a client agent present credentials to another SIP element to establish a session or be granted access to the network service. In 2005, Yang et al. proposed a key exchange and authentication scheme for use in SIP applications, which is based on the Diffie-Hellman protocol. But, Yang et al.'s scheme is not suitable for the hardware-limited client and severs, since it requires the protocol participant to perform significant amount of computations (i.e., four modular exponentiations). Based on this observation. Huang and Wei have recently proposed a new efficient key exchange and authentication scheme thor improves on Yang et al.'s scheme. As for security, Huang and Wei claimed, among others, that their scheme is resistant to offline dictionary attacks. However, the claim turned out to be untrue. In this paper, we show thor Huang and Wei's key exchange and authentication scheme is vulnerable to on offline dictionary attack and forward secrecy.

• Nuclear Engineering and Technology
• /
• v.53 no.6
• /
• pp.1970-1978
• /
• 2021

The aim of this study was to optimize the target, moderator, and collimator (TMC) in a neutron beam generator for the accelerator-based BNCT (A-BNCT) system. The optimization employed the Monte Carlo Neutron and Photon (MCNP) simulation. The optimal geometry for the target was decided as the one with the highest neutron flux among nominates, which were called as angled, rib, and tube in this study. The moderator was optimized in terms of consisting material to produce appropriate neutron energy distribution for the treatment. The optimization of the collimator, which wrapped around the target, was carried out by deciding the material to effectively prevent the leakage radiations. As results, characteristic of the neutron beam from the optimized TMC was compared to the recommendation by the International Atomic Energy Agent (IAEA). The tube type target showed the highest neutron flux among nominates. The optimal material for the moderator and collimator were combination of Fluental (Al₂0₃+AlF₃) with ⁶⁰Ni filter and lead, respectively. The optimized TMC satisfied the IAEA recommendations such as the minimum production rate of epithermal neutrons from thermal neutrons: that was 2.5 times higher. The results can be used as source terms for shielding designs of treatment rooms.

• Journal of the Korea Concrete Institute
• /
• v.16 no.1 s.79
• /
• pp.70-78
• /
• 2004

Although set accelerating agents are used generally in New Austrian Tunneling Method, the standards for test methods and quality of set accelerating agents are not prescribed domestically. In this study, the proprieties of the various standards and the characteristics of set accelerating agents for shotcrete were evaluated. The alkali contents of set accelerating agents based on silicate, aluminate and cement were higher than those of alkali-free ones. From the result, it is thought that the quality control of aggregate should be enhanced and that the number of test cycle of alkali-aggregate reaction should be increased. The setting times of cement paste with set accelerating agents based on silicate and alkali-free ones were different largely with mixing methods. Compressive strength of mortar with set accelerating agents based on silicate, aluminate and cement at one day satisfied the specifications of Korea Concrete Institute. However, the strength ratio compared to control mix at 28 days showed as $50{\~}65\%$ except for the alkali-free set accelerating agents. As a results of setting time and strength test, the establishment of domestic standards that can reflect the characteristics of materials and construction methods of tunnels and that can increase quality of set accelerating agents is required immediately.

• Clean Technology
• /
• v.23 no.2
• /
• pp.133-139
• /
• 2017

Bio-based plastics containing the biomass content higher than 25 wt% have been considered as environment-friendly materials due to their effects on the reduction in the $CO_2$ emission and petroleum consumption as well as biodegradability after use. In this study, poly vinyl chloride, plant-derived plasticizers, by adding a biodegradable catalyst was observed a change in the biodegradability and physical properties. To produce the oxidative decomposition transparent bio film, which is broken down in the initial percent elongation and physical properties such as tensile strength, it was to test the safety of the product as a food packaging material. Poly vinyl chloride, primary plasticizer, secondary plasticizer, anti fogging agent, the combined stabilizer were mixed in a high speed mixer, then extruded using an extrusion molding machine, after cooling, winding, to produce a oxidative decomposition transparent bio film and the control film, with a thickness of $12{\mu}m$ through winder role. Mechanical properties tensile strength, elongation, and the maximum load elongation and biodegradation test. Transparent bio film produced by biodegradation catalyst is compared with the control film. Tensile strength and elongation of films were found to be no significant difference. Further, as a result of the biodegradation test for 45 days based on the ASTM D6954-04 method, biodegrability of film is 61.4%.