• 열처리공학회지
• /
• 제8권1호
• /
• pp.65-74
• /
• 1995

This research was performed to investigate the effect of ageing on grain refinement of 82wt%Cu-13.5wt%Al-4.5wt%Ni-0.1wt% misch metal alloy with ageing temperature and time. The results obtained in this study are as follows; The variation of transformation temperature with ageing temperature had very influence on ageing time at $300^{\circ}C$. But it had not influence on ageing time at $100^{\circ}C$. The variation of transformation temperature after second reversed transformation cycle was not occured in martensitic phase ageing, but $M_s$ point was appeared equally with third reversed transformation cycle in parent phase ageing. The variation of $M_s$ point was not nearly with ageing time at $100^{\circ}C$ ageing temperature. But it was decreasing with ageing time at $300^{\circ}C$ ageing temperature and $A_s$ point was increasing with ageing time. Structure of parent phase ageing was being M18R martensitic and N2H martensitic phase. It was found that ${\alpha}$ and ${\gamma}_2$ phase were created by ageing of long time at $300^{\circ}C$ ageing temperature.

• Nuclear Engineering and Technology
• /
• 제9권3호
• /
• pp.117-123
• /
• 1977

소입된 질칼로이-4의 가공시효(strain ageing) 현상에 미치는 시효시간 및 온도의 효과를 523-588 狂 온도 구간에서 1~52초의 짧은 시효기간에 조사하였다. 이 실험 조건하에서, 가공시효응력은 5.55$\times$$10^{-4}$ sec$^{-1}$ 신연속도(strain rate) 경우 시효시간 및 시효온도가 증가할수록 증가하였다. 소입된 질칼로이-4의 응력부하 하의 가공시효 현상이 두 한계로 나타나는 것이 확인되었는데 첫단계는 0.39ev의 활성화 에너지 값의 구간으로 이는 전위 (dislocation) 주위의 응력상태로 인한 침입형 산소원자들의 Snoek타입의 배열 (ordering)로 인한 것으로 고려되었으며 두번째 단계는 0.6ev 활성화에너지 값을 갖는 구간으로 이는 주로 산소원자들의 장범위확산에 기인하는 것으로 해석되었다.

• 한국축산식품학회지
• /
• 제35권3호
• /
• pp.406-412
• /
• 2015

The combined effects of electron-beam irradiation and ageing of beef were examined. The irradiated samples at dose of 0 or 2 kGy were kept and analyzed for the microbial growth, shear values, meat color, and nucleotide-related flavor compounds at different ageing temperatures (2, 10, or 25℃) for 8 d. The irradiation effect on inactivation of foodborne pathogens was also investigated. The population of Listeria monocytogenes and E. coli O157:H7 inoculated in beef samples decreased in proportion to the irradiation dose, showing D₁₀ values of 0.66 and 0.65 kGy respectively. The irradiated beef eye of round had lower number of total aerobic bacteria (TAB) than nonirradiated one during the storage, but the TAB increased with higher ageing temperature (p<0.05). Especially, TAB increased sharply in non-irradiated samples aged at 25℃ after 4 d (p<0.05). With increasing ageing temperature and ageing time, shear force values decreased (p<0.05). The color a* values of the irradiated beef were lower than those of the non-irradiated throughout the ageing period (p<0.05). As ageing time and temperature increased, the amounts of inosine monophosphate decreased and the hypoxanthine increased (p<0.05). Relatively high ageing temperature could be used at irradiated beef eye of round to shorten the ageing time.

• Journal of Electrical Engineering and Technology
• /
• 제10권3호
• /
• pp.1124-1130
• /
• 2015

Moisture and high temperature are the most important factors that lead to the ageing of oil-paper insulation, but the research about space charge characteristics of oil-paper insulation does not take the combined effect of ambient temperature, moisture and thermal ageing into account. The pulsed electroacoustic (PEA) method was used to investigate the influence of moisture and temperature on space charge characteristics of oil paper at different ageing stages. The results showed that moisture could speed up formation of space charge in oil paper when water concentration was low, but the formation was restrained if the water concentration was high. At the beginning of thermal ageing, heterogeneous charge accumulation had predominance, but it gradually changed to homogeneous charge injection with ageing. It was believed that moisture concentration could speed up ageing and enhance charge accumulation on one hand, and accelerate or slow down the establishment speed of space charge on the other hand, therefore, charge accumulation type changed with ageing. The more seriously the oil-paper insulation was thermally aged, the deeper the trap energy level was, hence more space charge was trapped, which could be speeded up by increasing the ageing temperature, but the effect of ambient temperature did not fit the Arrhenius law.

• 열처리공학회지
• /
• 제5권4호
• /
• pp.233-239
• /
• 1992

A study of the precipitation process of Al-Li binary alloy at low ageing temperature has been carried by electrical resistivity measurement. Two types of G.P.zones were formed during ageing at low temperature. G.P. (1) zone and G.P. (2) zone have been formed primarily at ageing temperature below $60^{\circ}C$ and at ageing temperature range of $80^{\circ}C$ to $100^{\circ}C$, respectively. Therefore the precipitation process of Al-Li binary alloy was as follows; G.P.(1) zone ${\rightarrow}$ G.P.(2) zone ${\rightarrow}{\delta}^{\prime}{\rightarrow}{\delta}$ G.P. (1) zone might be affected by excess vacancies, but G.P. (2) zone might be affected by secondary defects. clusters and Li-vacancy pairs. The activation energy for formation of G.P. (2) zone is 0.87eV. It is lower than that of Al-Cu alloy.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1994년도 특별강연 및 춘계학술발표 개요집
• /
• pp.44-47
• /
• 1994

The ageing behavior of Cu-bearing HSLA steels was studied by using Differential scanning calorimetry(DSC), Transmission electron microscopy and hardness tester. Two heat evolution peaks were observed during DSC scans over the temperature range of 25～590$^{\circ}C$ at a heating rate of 5$^{\circ}C$/min. The peaks appeared in low (241∼319$^{\circ}C$ : HSLA-A, 224∼310$^{\circ}C$ : HSLA-B) and high temperature (514∼590$^{\circ}C$ : HSLA-A, 451∼558$^{\circ}C$ : HSLA-B) are attributed to the formation of coherent Cu-clusters and noncoherent $\varepsilon$-Cu phase, respectively. It was confirmed that as ageing proceeds, the coherent bcc Cu-clusters transform to noncoherent fcc $\varepsilon$-Cu phase. In the case of the ageing to peak hardness at 300$^{\circ}C$ and 400$^{\circ}C$, the coherent Cu-clusters contributed to the hardening. As ageing time and temperature increase over peak hardness, noncoherent $\varepsilon$-Cu are formed and hardness decreases.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1994년도 특별강연 및 춘계학술발표 개요집
• /
• pp.39-43
• /
• 1994

The effects of ageing treatment on the mechanical properties of two Cu-bearing HSLA(High Strength Low Alloy) steels, HSLA-A and HSLA-B ,were studied by means of SEM, TEM, tensile, charpy impact and hardness tests. These steels showed excellent combination in strength and toughness at an ageing of $650^{\circ}C$ by the precipitation of $\varepsilon$-Cu and low carbon alloying. The peak strength was achieved at an ageing of 50$0^{\circ}C$ in both steels, while the impact energy was very low in this peak strength. With ageing temperature above this temperature, strength was decreased whereas impact energy increased. A marked increase in hardness above 675$^{\circ}C$ was associated with the formation of “M-A constituents” which forms during cooling from austenite-ferrite two phase region. The impact transition temperature of HSLA-A and HSLA-B steels were -l$25^{\circ}C$ and -145$^{\circ}C$, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.96-99
• /
• 2003

In this paper, ageing diagnostics in the large capacity oil transformer are investigated. Following items are investigated for the ageing diagnostic in transformer oils (leakage current of sensor, power consumption and temperature of transformer oil). All temperature data are gathered from daily report in the substation. The power consumption of transformer are gathered output report of APIS(Airport Power Information System). Especially, data of sensor leakage current are accumulated from the online diagnostic system for transformer oil. The temperature of transformer oils major change factor was ambient temperature and capacity of power load. The leakage current are change by oil temperature. The leakage current ware not more than 2 [nA] in summer,

• Nuclear Engineering and Technology
• /
• 제8권3호
• /
• pp.151-157
• /
• 1976

냉간가공한 질칼로이-4의 가공시효(strain ageing) 현상이 진공속에서 변형온도 및 1143ppm-3500ppm의 산소 함량의 변수로써 조사되었다. 가공시효 현상이 0-10 % 냉간가공한 질칼로이-4의 경우 200-45$0^{\circ}C$의 온도구간에서 조사되었으며, 이때 가공시효 현상은 냉간가공량이 증가할수록 감소하는 현상을 보였다. 이 냉간가공에 따른 가공시효의 감소는 냉간가공시 발생한 결함에 의해 산소 원자들이 trapping 되는 결과로 기인된 것으로 고려된다. 냉간가공된 질칼로이-4의 최대 가공시효 응력은 함유된 산소의 량의 평방근에 비례한다는 사실이 밝혀졌다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.208-209
• /
• 2006

This study presents the thermal stress characteristics of TL porcelain insulators(healthy and ageing) by the accelerating thermal mechanical ageing test with forced temperature gradient. The test temperature gradient is $95^{\circ}C(-35{\sim}60^{\circ}C)$, it was focused to high temperature thermal stress as compared with IEC 60575 standard. There was no a discrimination in the case of healthy aluminous porcelain insulators, dissimilarly in crystoballite insulators according to this test method. It was indicated that the long tenn reliability by thermal stress was conformed reasonably through the conventional accelerating ageing test methods.