• Journal of the korean academy of Pediatric Dentistry
• /
• v.10 no.1
• /
• pp.115-122
• /
• 1983

The author surveyed 2,082 schoolchildren (Male: 1,078, Female: 1,004) from 7 to 12 years old in "N" primary school in kwang Ju City, and studied on 304 schoolchildren (Male: 176, Female: 128) having maxillary median diastema. The results were as follows: 1. The prevalence of maxillary median diastema was 14.6%, and it showed the greater rate at the boys than at the girls and the highest rate at 8 years old in the both sexes. 2. The maxillary median diastema showed decreasing tendency with ageing. 3. The frenum distance in children without local factors showed no change and the divergent degree of maxillary median diastema showed decreasing tendency after the eruption of maxillary lateral incisors. 4. The rate of maxillary median diastema associated with local factors was 37.8% and it showed increasing tendency with ageing. 5. The prevalence of median diastema according to etiology was as follows; rotated tooth; 12.2%, supernumerary teeth; 10.9%, abnormal frenum; 9.5%, peg lateralis; 7.2%, open bite; 2.6%, abnormal pattern of interseptal alveolar bone; 2.6%, missing lateral incisor; 0.7%, tooth size discrepancy; 0.3%.

• Structural Engineering and Mechanics
• /
• v.52 no.4
• /
• pp.701-721
• /
• 2014

In the assessment of existing RC buildings, the reliable appraisal of the compressive strength of in-situ concrete is a fundamental step. Unfortunately, the data that can be obtained by the available testing methods are typically affected by a high level of uncertainty. Moreover, in order to derive indications about the degradation and ageing of the materials by on site tests, it is necessary to have the proper terms of comparison, that is to say, to know the reference data measured during the construction phases, that are often unavailable when the building is old. In the cases when such a comparison can be done, the in situ strength values typically turn out to be lower than the reference strength values (tests performed on taken samples during the construction). At this point, it is crucial to discern and quantify the specific effect induced by different factors: ageing of the materials; poor quality of the placement, consolidation or cure of the concrete during the construction phases; damage due to drilling. This paper presents a procedure for correlating the destructive compressive tests and non-destructive tests (ultrasonic pulse velocity tests) with the data documenting the compressive strength tested during the construction phases. The research work is aimed at identifying the factors that induce the difference between the in-situ strength and cubes taken from the concrete casting, and providing, so, useful information for the assessment procedure of the building.

• Journal of the Korean Institute of Gas
• /
• v.7 no.1 s.18
• /
• pp.28-32
• /
• 2003

In order to apply the properties of fiber reinforced plastic(FRP) to support panel of polyurethane foam in LNG storage tank, we estimated the mechanical properties, degree of vapour barrier, chemical stability and thermal conductivity changes as ageing. According to the results, the mechanical strength (i.g. compressive strength, bending strength, tensile strength and shear strength) are more than 30 times higher than those of plywood. The FRP-polyurethane foam(PUF) composites have lower thermal conductivity changes as ageing than plywood-PUF composites. FRP-PUF sandwich composite for LNG storage tank with these remarkable properties are compared the abilities of these structures with those of the conventional structures(plywood-PUF sandwich composite). Finally, we can obtain the effects such as superior mechanical properties and fuel saving through improved ability of vapor barrier.

• 한국노년학
• /
• v.36 no.4
• /
• pp.1059-1074
• /
• 2016

The authors aimed to understand the structural relationship among lifelong education, life satisfaction, and depression in later life. For the data analysis, 4,096 older adults aged 65 and more without anti-depression treatment were subtracted from the Korean Longitudinal Study of Ageing (KLoSA) of the year 2012. The findings include that first, older adults' non-formal and informal learning activities influence their life satisfaction positively. Second, older adults' non-formal and informal learning activities have a negative effect on their depression. Third, older adults' depression has a negative impact on their life satisfaction. Fourth, older adults' non-formal and informal learning activities decrease the degree of depression and in turn influence their life satisfaction positively, which shows depression level has a partial mediating effect. The indirect effect of informal learning was greater than that of non-formal learning. We drew practical implications based on these findings.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.2
• /
• pp.840-845
• /
• 2017

In this paper, in order to investigate the lifetime of oil-paper insulation, specimens were artificially aged with thermal and electrical multiple stresses. Accelerated ageing factors and equivalent operating years for each aging temperatures were derived from results of tensile strengths for the aged paper specimens. Also, the evaluation for the multi-stress aged specimens were carried out through the measurement of impulse breakdown voltage at high temperature of $85^{\circ}C$. The lifetimes of the oil-paper insulations were calculated with the value of 66.7 for 1.0 mm thickness specimens and 69.7 for 1.25 mm thickness specimens throughout the analysis of impulse BD voltages using equivalent operating years, which means that dielectric strengths would not be severely decreased until the mechanical lifetime limit. Therefore, for the lifetime evaluation of the oil-paper insulation, thermal aging would be considered as a dominant factor whereas electrical degradation would be less effective.

• Journal of the Korean Society of Safety
• /
• v.11 no.1
• /
• pp.67-74
• /
• 1996

In order to investigate the effect and reliability coming up to properties of the matter due to the change of solid structure in dielectrics, the effect of dielectric characteristics for thermal treated LDPE film was made researches. Specimens of LDPE with thickness 100 [$\mu\textrm{m}$] were investigated into the change of solid structure by ageing. Thermal treated specimen were made, that were after applying heat at 100 [$^{\circ}C$] for 1 [hour] \circled1 air-cooled specimen slowly, \circled2 water-cooled specimen under the ,com temperature, \circled3 liquid nitrogen gas-cooled specimen rapidly. With specimen of thermal treated three types turn out and original, it was for dielectric characteristics to be experimented in the temperature range of 20~120 [$^{\circ}C$], frequency range of 30~1.5${\times}10^5/$[Hz], appling voltage from 300 to 1500[㎷]. Consequently, the degree of crystallinity was changed with 49~57 [%] according to the thermal treatment. In case of frequency, 100 [Hz], on the thermal dependance in dielectric characteristics, tan decreases due to cooling method.

• The Journal of the Korea Contents Association
• /
• v.20 no.10
• /
• pp.326-337
• /
• 2020

The purpose of this study is to analyze the effect of social participation types on cognitive impairment degree(normal, mild, severe cognitive function) by urban and rural difference. The research was performed by multinomial logistic regression with the data of elderly 5,668 over 55 years of age from the sixth wave(2016) and the seventh wave(2018) of the Korean Longitudinal Study of Ageing. Results show that social participation reduces the risk of cognitive impairment on both urban and rural older adults regardless of types, but the types of social participation, which are effective to reduce the risk of cognitive impairment, are different between urban and rural area. According to residential area, types of social participation, which are effective to decline the risk of being mild or severe cognitive impairment and the risk of being severe cognitive impairment relative to mild, are different. These findings suggest that, in order to prevent cognitive impairment and reduce the severity, social participation is strongly recommended and appropriate supports are required. This implies policy and intervention efforts considering the urban and rural difference are needed.

• Fashion & Textile Research Journal
• /
• v.18 no.4
• /
• pp.531-539
• /
• 2016

Charcoal dyed fabrics have been widely used in home textiles and functional clothing due to their anti-statics, antibacterial, deodorization, far infrared emitting and anion releasing. Soybean fiber were regenerated from soybean. Soybean fiber have biodegradable, microbiocidal, non-allergic, and anti-ageing properties. The purpose of this study is to investigate the dyeing characteristics of soybean fabric using charcoal as colorants. Soybean fabrics were dyed with charcoal solution according to concentration of charcoal, dyeing temperature, and dyeing time. To improve washing fastness and investigate mordanting condition, soybean fabric and dyed soybean fabric with charcoal were mordanted by mordanting agents such as $CH_3COOH$(acetic acid), NaCl(sodium chloride) and $AlK(SO_4)_2{\cdot}12H_2O$(Aluminium Potassium Sulfate). Dyeability and color characteristics of charcoal dyed soybean fabric were obtained by computer color matching and SEM morphology analysis. Particle size of charcoal and color fastness were also investigated. The results obtained were as follows; Mean average diameter of charcoal was $1.39{\mu}m$. The dyeability of soybean fabric using charcoal as colorants was increased gradually with increasing concentration of charcoal dyeing solution and saturated at about 8%(o.w.b.). The optimum dyeing temperature and dyeing time were $90{\sim}105^{\circ}C$ and 60~90 minutes respectively. The overall wash fastness at dyeing concentration 2~4%(o.w.b.) and 6~10%(o.w.b.) were 4 degree and 3-4 degree respectively. The fastness to washing according to mordanting method indicated good grade result as more than 4 degree in all conditions. On the other hand, the staining of adjacent fabrics, i.e. PET, Acryl, Wool, Acetate, Nylon and Cotton was found to be of grade 4 or 4-5 in all conditions.

• Journal of the Korean Society of Tobacco Science
• /
• v.18 no.1
• /
• pp.66-75
• /
• 1996

This study was carried out to investigate the effects of high temperature and humidity on the ageing of processed leaf tobacco. Four(1993) or six(1994) grades (Both flued-cured and burley) of processed leaf packed in carton box were stored under the natural and artificial conditions. When the Processed leaf was stored in the controlled mom at 40℃ with 75% R.H.(1993) for 40 days, the leaf pH was decreased. The decreasing rate of leaf pH was similar to that of leaf stored under the natural warehouse condition for 15 months. The degree of lightness and yellowness of leaf also decreased, while the decaying or darkening of the leaf was observed. When the processed leaf was stored in the controlled room at 35℃ with 65% R.H.(1994) for 90 days, the pH of flue-cured was decreased 0.22, which was similar to that of the leaf stored under the natural warehouse condition for 15 months, and the lightness, and redness of the leaf were higher than those of the control. As compared with the leaf stored under the natural condition for 2 years, the smoking quality of leaf stored under this condition was similar or somewhat better. The pH of burley tobacco changed little compared to that of flue-cured during storage in this study.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.4
• /
• pp.151-159
• /
• 2001

As huge energy transfer systems like a nuclear power plant, steam power plant and petrochemical plant are operated for a long time, mechanical properties are changed by degradation. The life time of the systems can be affected by the mechanical properties. BI(Ball Indentation) test has a potential to replace conventional fracture tests like a uniaxial tensile test, fracture toughness test, hardness test and so on. In this paper, we would like to present the ageing evaluation technique by the BI method. The four classes of the thermally aged 1Cr-!mo-0.25V specimens were prepared using an artificially accelerated aging method. Tensile tests, fracture toughness tests, hardness tests and BI tests were performed. The results of the BI tests were in good agreement with fracture characteristics by a standard fracture test method within 5%. The IDE(Indentation Deformation Energy) of a BI technique as a new parameter for evaluating a degradation was suggested and the new IDE parameter clearly depicts the degradation degree.