• Journal of Mechanical Science and Technology
• /
• v.17 no.5
• /
• pp.776-783
• /
• 2003

A low speed wind tunnel test was conducted for full-scale model of an unmanned aerial vehicle (UAV) in Korea Aerospace Research Institute (KARI) Low Speed Wind Tunnel(LSWT). The purpose of the presented paper is to illustrate the general aerodynamic and performance characteristics of the UAV that was designed and fabricated in KARI. Since the testing conditions were represented minor portions of the load-range of the external balance system, the repeatability tests were performed at various model configurations to confirm the reliability of measurements. Variations of drag-polar by adding model components such as tails, landing gear and test boom are shown, and longitudinal and lateral aerodynamic characteristics after changing control surfaces such as aileron, flap, elevator and rudder are also presented. To explore aerodynamic characteristics of an UAV with model components build-up and control surface deflections, lift curve slope, pitching moment variation with lift coefficients and drag-polar are examined. The discussed results might be useful to understand the general aerodynamic characteristics and drag pattern for the given UAV configuration.

• International Journal of Aeronautical and Space Sciences
• /
• v.13 no.3
• /
• pp.307-316
• /
• 2012

Numerical simulations of 3D aircraft configurations are performed in order to understand the effects of turbulence models on the prediction of aircraft's aerodynamic characteristics. An in-house CFD code that solves 3D RANS equations and two-equation turbulence model equations are used. The code applies Roe's approximated Riemann solver and an AF-ADI scheme. Van Leer's MUSCL extrapolation with van Albada's limiter is also adopted. Various versions of Menter's $k-{\omega}$ SST turbulence models as well as Coakley's $q-{\omega}$ model are incorporated into the CFD code. Menter's $k-{\omega}$ SST models include the standard model, the 2003 model, the model incorporating the vorticity source term, and the model containing controlled decay. Turbulent flows over a wing are simulated in order to validate the turbulence models contained in the CFD code. The results from these simulations are then compared with computational results from the $3^{rd}$ AIAA CFD Drag Prediction Workshop. Numerical simulations of the DLR-F6 wing-body and wing-body-nacelle-pylon configurations are conducted and compared with computational results of the $2^{nd}$ AIAA CFD Drag Prediction Workshop. Aerodynamic characteristics as well as flow features are scrutinized with respect to the turbulence models. The results obtained from each simulation incorporating Menter's $k-{\omega}$ SST turbulence model variations are compared with one another.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1057-1062
• /
• 2008

Representing a complex, three-dimensional shape, such as an automobile, requires a large amount of CAD data consisting of millions of approximated discontinuous points, which makes it difficult or even impossible to efficiently optimize the entire shape. For this reason, in this paper, function based design method is proposed to optimize the external shape of an automobile. A vehicle modeling function was defined in the form of a Bernstein polynomial to smoothly express the complex 2D and 3D automobile configurations. The sub-sectional parts of the vehicle modeling function are defined as section functions through classifying each subsection of a box model. It is shown that the use of the vehicle modeling functions has the useful advantages in an aerodynamic shape optimization.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.25 no.2
• /
• pp.63-68
• /
• 2017

In the present study, a wind tunnel test for a rotor-blade configuration was conducted to investigate a basic aerodynamic performance and a effect of the cross wind. The diameter of the configuration was 1.46 m and the test was carried out for both a clean and a tripped configurations. The boundary layer for the trip configuration was simulated by zig-zag tape and the test performed on constant-velocity and constant-rotational modes. It was shown that the test result for the tripped configuration reduces the maximum power coefficient by 9.4% ~ 12.1% compared to the clean one. Within $5^{\circ}$ of the flow angle, there is no significant loss of power, however, the coefficient is reduced by 5.3% ~ 36.7% in the range of $10^{\circ}{\sim}30^{\circ}$.

• International Journal of Fluid Machinery and Systems
• /
• v.9 no.2
• /
• pp.143-149
• /
• 2016

In this study, a method for the multi-objective optimization of an impeller for a centrifugal compressor using fluid-structure interaction (FSI) and response surface method (RSM) was proposed. Numerical simulation was conducted using ANSYS CFX and Mechanical with various configurations of impeller geometry. Each design parameter was divided into 3 levels. A total of 15 design points were planned using Box-Behnken design, which is one of the design of experiment (DOE) techniques. Response surfaces based on the results of the DOE were used to find the optimal shape of the impeller. Two objective functions, isentropic efficiency and equivalent stress were selected. Each objective function is an important factor of aerodynamic performance and structural safety. The entire process of optimization was conducted using the ANSYS Design Xplorer (DX). The trade-off between the two objectives was analyzed in the light of Pareto-optimal solutions. Through the optimization, the structural safety and aerodynamic performance of the centrifugal compressor were increased.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.8 no.2
• /
• pp.209-217
• /
• 2016

Unlike conventional airplane, a WIG craft experiences righting moment and adverse yaw moment in banked turning in ground effect. Numerical simulations are carried out to study the aerodynamics of banked wing in ground effect. Configurations of rectangular wing and delta wing are considered, and performance of endplates and ailerons during banking are also studied. The study shows that righting moment increase nonlinearly with heeling angle, and endplates enhance the righting. The asymmetric aerodynamic distribution along span of wing with heeling angle introduces adverse yaw moment. Heeling in ground effect with small ground clearance increases the vertical aerodynamic force and makes WIG craft climb. Deflections of ailerons introduce lift decrease and a light pitching motion. Delta wing shows advantage in banked turning for smaller righting moment and adverse yaw moment during banking.

• The KSFM Journal of Fluid Machinery
• /
• v.18 no.5
• /
• pp.54-58
• /
• 2015

The objective of this paper is to investigate the flow characteristics of the multi nozzle. The configurations of the single, the 3- and the 6-nozzle were selected under Mach number of 2.5. Under-expanded pressure ratio such as 1.2, 1.6 and 2.0 were selected to elucidate interference of the free jet. The flow visualization was carried out with the Schlieren system and a supersonic cold-flow system. Also, the flow characteristics were studied computationally with the density measurements. Reasonable agreement between experimental and theoric equation has been achieved qualitatively.

• 한국전산유체공학회:학술대회논문집
• /
• 2007.10a
• /
• pp.157-161
• /
• 2007

The prediction of the safe separation of the external stores carried on military aircraft is an important task in the aerodynamic design area having the objective to define the operational, release envelopes. The major concern of this study is only safe jettison problem with ejections. This work consists of concept and some results for external store configurations. A Computational Fluid Dynamics technique is applied to calculate the aerodynamic forces. The FLUENT with an implicit Euler solver is used for the present simulations. The computational results are validated against the experimental data.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.1E
• /
• pp.29-34
• /
• 1997

Numerical prediction of aerodynamic noise radiated by subsonic rotors are carried out. A computer program has been developed which incorporates both the discrete frequency noise as well as the broadband noise arising from the ingestion of turbulence. Acoustic analogy is used in conjunction with Homicz's formulation of turbulence ingestion noise. Formulation 1A of Farassat is used to enhance the numerical analysis performance of Ffowcs-Williams Hawkings equation by eliminating the numericla time differentiation. Homicz's trubulence ingestion noise prediction technique is used to understand the characteristics of broadband noise radiated by isotropic trubulence in gestion. Numerical predictions are carried out for a number of rotor configurations and compared with experimental data. Monopole consideration of transonic rotor agrees well with both the experimental data and the linear theory. Noise radiation characteristics of rotor at lifting hover are investigated utilizing simple blade loading obtained by thin wing section theory. By incorporating discrete noise prediction of steady loading with broadband spectrum, much better agreement with experimental data is obtained in the low frequency region. The contributions from different noise mechanisms can also be analyzed through this method.

• International Journal of Aeronautical and Space Sciences
• /
• v.16 no.1
• /
• pp.110-122
• /
• 2015

In this paper, the unsteady aerodynamics and blade structural dynamics of an experimental bearingless rotor were analyzed. Due to the multiple load path and nonlinear behavior of a bearingless rotor, sophisticated structural modeling and structural-aerodynamic coupled analysis is required. To predict the internal load and deformation of an experimental bearingless rotor, trim analysis was implemented. The results showed good agreement when compared with those predicted by CAMRAD II the rotorcraft comprehensive analysis. It is possible to extend the present structural-aerodynamic combined analysis to further advanced configurations of the bearingless rotor in the future.