• 한국응용과학기술학회지
• /
• 제18권2호
• /
• pp.118-126
• /
• 2001

Micelle formation and adsorption at the $Ti0_{2}$ interface of a series of polystyrene-polythylene oxide(PS-PEO) block copolymer in aqueous solution was studied using fluorescence probing and small-angle X-ray methods. Further, the stability of aqueous $Ti0_{2}$ dispersion in the presence of copolymer was investigated by microelectrophoresis, optical density and sedimentation measurements. The dissolution of pyrene as fluorescent probe in aqueous surfactant solution leads to a slow decrease of the $I_{1}/I_{3}$ ratio, as the copolymer concentration increase; $I_{1}$ and $I_{3}$ are respectively the intensities of the first and third vibrionic peaks in the pyrene fluorescence emission. The behaviour was due to the characteristics of the copolymers and/or to the copolymer association efficiency in water. Moreover, the adsorption at the plateau level increases with decreasing PEO until chain length. The zeta potential of $TiO_{2}$ particles decreases with increasing copolymer concentration and reaches a plateau value. Finally, stabilization using block copolymers was more effective with samples having higher weight fractions of PS block.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제27권6호
• /
• pp.1-10
• /
• 2022

This study assessed the feasibility of iron oxide nanoparticles impregnated with biochar (INPBC), derived from woody biomass, as a stabilizing agent for the stabilization of farmland soil in the vicinity of an abandoned mine through pot experiments with 28 days of lettuce growth. The lettuce grown in the INPBC amended soils increased by more than 100% and the concentrations of inorganic elements (Cu, Ni, Zn) decreased by more than 40%. As, Cd and Pb were not transferred properly from the soils to the lettuce biomass. The bioavailability of arsenic and heavy metals in the INPBC amended soils were decreased by 26%~50%. It seems that the major mechanisms of stabilization were arsenic adsorption on iron oxides, heavy metal precipitation by soil pH increasing and heavy metal adsorption on organic matter. These results revealed that the lower bioavailability of the inorganic pollutants in the soils stabilized using INPBC induced lower transfer to the lettuce. Thus, INPBC could be used as an amendment material for the stabilization of farmland soils contaminated by arsenic and heavy metals. However, a pre-review of the chemical properties of the amended soil must be performed prior to applying INPBC in farmland soil because the concentration of the nutrients in the soil such as available phosphates and exchangeable cations (Ca, Mg, K) could be decreased due to adsorption on the surface of the iron oxides and organic matter.

• 한국항해항만학회지
• /
• 제38권3호
• /
• pp.269-275
• /
• 2014

본 연구에서는 제강슬래그를 이용하여 수용액상에서 혼합 중금속의 흡착능을 평가하였다. 게다가, 제강슬래그를 안정화제로 활용하여 해양오염퇴적물 내 Ni, Zn, Cu, Pb 및 Cd에 대하여 중금속 안정화 실험을 수행하였다. 중금속 흡착 특성은 Freundlich 및 Langmuir 방정식을 이용하여 해석하였으며, 평형흡착 실험결과는 Langmuir 모델에 잘 부합되었고 $Pb^{2+}$ > $Cd^{2+}$ > $Cu^{2+}$ > $Zn^{2+}$ > $Ni^{2+}$순으로 평형흡착량이 많았다. 안정화 방법은 오염퇴적물에 제강슬래그 첨가 후 150일간 습윤 양생 하였다. 연속추출 실험결과로부터, 미처리 오염퇴적물과 비교해서 Ni, Zn, Cu, Pb 및 Cd의 이온교환, 탄산염, 산화물 형태는 제강슬래그에 의해 각각 13%, 6.0%, 1.3%, 17% 및 50% 감소하였다.

• 한국항해항만학회지
• /
• 제39권3호
• /
• pp.185-192
• /
• 2015

본 연구에서는 표면개질 활성탄을 이용하여 수용액상에서 혼합 중금속($Cr^{6+}$, $As^{3+}$)의 흡착능을 평가하였고 또한 표면개질 활성탄을 안정화제로 활용하여 해양오염퇴적물 내 As 및 Cr에 대하여 중금속 안정화 실험을 수행하였다. 실험결과, 흡착평형은 약 120분 후에 도달하였다. 또한, 중금속 등온 흡착 특성은 Freundlich 및 Langmuir 방정식을 이용하여 해석하였으며, 평형흡착 실험결과는 Langmuir 모델에 잘 부합되었고 $As^{3+}$ (28.47 mg/g)가 $Cr^{6+}$ (13.28 mg/g)보다 평형 흡착량이 많았다. $Cr^{6+}$인 경우, 용액의 pH가 6에서 10으로 증가함에 따라서 흡착량은 감소하는 것으로 나타났다. 하지만 pH 증가 변화에서 $As^{3+}$의 흡착량은 미미한 증가를 보였다. 안정화 방법은 오염퇴적물에 표면 개질한 활성탄 첨가 후 120일간 습윤 양생 하였다. 연속추출 실험결과로부터, 미처리 오염퇴적물과 비교해서 Cr 및 As의 이온교환, 탄산염, 산화물 및 유기물 존재 형태 합의 비는 각각 5.8% 및 7.6% 감소하였다.

• 한국세라믹학회지
• /
• 제32권2호
• /
• pp.217-226
• /
• 1995

Alumina powders were dispersed using crosslinkable organic molecules by electrosteric stabilization and then consolidated by crosslinking of organic molecules. The effect of processing variables such as the physicochemical properties of both solvent media and organic molecules, the proportions of mixed organic media, etc. were studied. FT-IR was used todeduce the mechanism of organic molecules adsorption on the alumina particle surfaces. The adsorption characteristics and the electrokinetic behavior of alumina suspensions were correlated with the stability of particle in alumina suspension using rheological measurements. The green body of alumina consolidated by the chemical crosslinking of the adsorbed organic molecules after the alumina suspension had been stabilized was tough enough for green machining and the sintered alumina fabricated by this proposed process also showed a high bending strength and a homogeneous microstructure.

• 한국세라믹학회지
• /
• 제33권2호
• /
• pp.214-222
• /
• 1996

The effect of physicochemical properties of organic solvent and dispersant among organic solvent dispersant binder and plasticizer which are used as processing additives in MLCC fabrication process on the dispersion of BaTiO3 was studied. The steric and electrostatic stabilization mechanisms in dispersion of BaTiO3 in organic media were evaluated respectively. The sttability of BaTiO3 achieved bysteric stabilization was dependent on the fraction of surface coverage of dispersant adsorption on BaTiO3. The electrostatic repulsive forces of BaTiO3 particles dispersed in orgainc media was found to be appreciabley great and dependent mainly on the kinds of organic solvent used. The mechanism affecting the stability of BaTiO3 was studied by the method of rheologi-cal behaviors of BaTiO3 suspension.

• 청정기술
• /
• 제22권4호
• /
• pp.299-307
• /
• 2016

These days, coal is one of the most important energy resources used for transportation, industry, and electricity. There are two types of coal: high-rank and low-rank. Low-rank coal has a low calorific value and contains large amounts of useless moisture. The quality of low-rank coal can be increased by simple drying technology and it needs to be stabilized by hydrocarbons (e.g. palm acid oil, PAO) to prevent spontaneous combustion and moisture re-adsorption. Spontaneous combustion becomes a major problem during coal mining, storage, and transportation. It can involve the loss of life, property, and economic value; reduce the quality of the coal; and increase greenhouse gas emissions. Besides spontaneous combustion, moisture re-adsorption also leads to a decrease in quality of the coal due to its lower heating value. In this work, PAO was used for additive to stabilize the upgraded coal. The objectives of the experiments were to determine the stabilization characteristic of coal by analyzing the behavior of upgraded coal by drying and PAO addition regarding crossing-point temperature of coal, the moisture behavior of briquette coal, and thermal decomposition behavior of coal.

• Transactions on Electrical and Electronic Materials
• /
• 제7권3호
• /
• pp.112-117
• /
• 2006

In this paper we present that the effects of polymer adsorption on stabilities and CMP performance of ceria abrasive particles. Characterization of ceria abrasive particles in the presence of poly(vinyl pyrrolidone) (PVP) was performed by the measurements of adsorbed amounts of PVP, average sizes, and the back scattering intensities of the ceria abrasive particles as functions of PVP molecular weight and PVP concentration. The ceria abrasive particles in the presence of PVP were used to polish $SiO_2\;and\;Si_3N_4$ films deposited on Si wafers in order to understand the effect of PVP adsorption on chemical mechanical polishing (CMP) performance, together with ceria abrasive particles without PVP. Adsorption of PVP on the ceria abrasive particles enhanced the stability of ceria abrasive particles due to steric stabilization of the thick adsorbed layer of PVP. Removal rates of the deposited $SiO_2\;and\;Si_3N_4$ films by the ceria abrasive particles in the presence of PVP were much lower than those in the absence of PVP and their magnitudes were decreased with an increase in the concentration of free PVP chains in the dispersion media. This suggests that the CMP performance in the presence of PVP could be mainly controlled by the hydrodynamic interactions between the adsorbed PVP chains and the free ones. Moreover, the molecular weight dependence of PVP on the removal rates of the deposited films was hardly observed. On the other hand, high removal rate selectivity between the deposited films in the presence of PVP was not observed.

• 청정기술
• /
• 제19권1호
• /
• pp.38-43
• /
• 2013

저등급 석탄의 건조 후 안정화하기 위한 방법으로 탄화수소의 기상흡착에 대한 연구를 수행하였다. 밀폐된 5 L의 데시케이터 용기에 건조 석탄과 안정화제를 넣고 주어진 온도에서 일정 시간 동안 유지시킨 후 석탄의 표면 특성과 자연발화 경향을 살펴보았다. 기상흡착 후 건조 석탄의 표면적은 미세기공을 중심으로 감소하였다. 흡착시간과 온도가 증가할수록 안정화 석탄의 자연발화 경향은 감소하는 것으로 나타났다. 안정화제의 종류에 따른 자연발화 경향은 큰 차이를 보이지 않았다. 분석 결과에 의하면 석탄의 0.5 wt% 이하인 소량 흡착으로 안정화 효과를 나타내는 것이 확인되었으며, 저온에서 기상흡착에 의한 안정화 현상은 저분자량의 탄화수소 흡착에 의한 것으로 나타났다.

• 자연과학논문집
• /
• 제8권1호
• /
• pp.41-45
• /
• 1995

부분적으로 양이온 교환된 Y 제올라이트를 특별한 반응조건하에서 예열 처리한 결과, 하소한 제올라이트는 수소, 질소, 산소, 일산화탄소 및 메탄기체 혼합물에 대한 분리특성을 보유하고 있으나 미처리한 시료, 예로서 A형 또는 X형 제올라이트보다 물 분자에 대한 친화성이 매우 낮음을 알 수가 있었다. 흡착성능, 흡착등온선 및 흡착열에 관한 측정결과를 근거로 하여 관찰효과를 검토하였다.