• 한국환경과학회지
• /
• 제27권3호
• /
• pp.167-177
• /
• 2018

The removal characteristics of As and Se ions from aqueous solution by hexadecyl trimethyl ammonium bromide (HTMAB) modified anthracite (HTMAB-AT) were investigated under various conditions of contact time, pH and temperature. When the pH is 6, the zeta potential value of anthracite (AT) is -24 mV and on the other hand, the zeta potential value of the HTMAB-AT is +44 mV. It can be seen that the overall increase of about 60 mV. Increasing the (+) potential value indicates that the surface of the adsorbent had a stronger positive charge, so adsorption for the anion metal was increased. The isotherm data was well described by Langmuir and Temkin isotherm model. The maximum adsorption capacity was found to be 7.81 and 6.89 mg/g for As and Se ions from the Langmuir isotherm model at 298 K, respectively. The kinetic data was tested using pseudo first and pseudo second order models. The results indicated that adsorption fitted well with the pseudo second order kinetic model. The mechanism of the adsorption process showed that adsorption was dependent on intra particle diffusion model according to two step diffusion. The thermodynamic parameters(${\Delta}G^{\circ}$, ${\Delta}H^{\circ}$, and ${\Delta}S^{\circ}$) were also determined using the equilibrium constant value obtained at different temperatures. The thermodynamic parameters indicated that the adsorption process was physisorption, and also an endothermic and spontaneous process.

• Bulletin of the Korean Chemical Society
• /
• 제34권8호
• /
• pp.2358-2366
• /
• 2013

Iron oxide (ferrihydrite, hematite, and magnetite) coated silica gels were prepared using a low-cost, easily-scalable and straightforward method as the adsorbent material for arsenic removal application. Adsorption of the anionic form of arsenic oxyacids, arsenite ($AsO^{2-}$) and arsenate ($AsO{_4}^{3-}$), onto hematite coated silica gel was fitted against non-linear 3-parameter-model Sips isotherm and 2-parameter-model Langmuir and Freundlich isotherm. Adsorption kinetics of arsenic could be well described by pseudo-second-order kinetic model and value of adsorption energy derived from non-linear Dubinin-Radushkevich isotherm suggests chemical adsorption. Although arsenic adsorption process was not affected by the presence of sulfate, chloride, and nitrate anions, as expected, bicarbonate and silicate gave moderate negative effects while the presence of phosphate anions significantly inhibited adsorption process of both arsenite and arsenate. When the actual efficiency to remove arsenic was tested against 1 L of artificial arsenic-contaminated groundwater (0.6 mg/L) in the presence competing anions, the reasonable amount (20 g) of hematite coated silica gel could reduce arsenic concentration to below the WHO permissible safety limit of drinking water of $10{\mu}g/L$ without adjusting pH and temperature, which would be highly advantageous for practical field application.

• Korean Chemical Engineering Research
• /
• 제57권5호
• /
• pp.679-686
• /
• 2019

수용액으로부터 활성탄에 대한 아닐린 블루의 흡착 평형, 동역학 및 열역학적 특성을 초기농도, 접촉시간과 온도를 흡착변수로 하여 조사하였다. 아닐린 블루의 등온흡착은 Langmuir, Freundlich, Redlich-Peterson, Temkin 및 Dubinin-Radushkevich 모델을 통해 해석하였다. Langmuir 모델이 다른 모델들 보다 등온 데이터에 더 잘 맞았다. 평가된 Langmuir 분리계수($R_L=0.036{\sim}0.068$)는 활성탄에 의한 아닐린 블루의 흡착 공정이 효과적인 처리방법이 될 수 있음을 나타냈다. 흡착속도상수는 유사일차속도 모델, 유사이차속도 모델 및 입자내 확산 모델에 적용하여 구하였다. 활성탄에 대한 아닐린 블루의 흡착속도실험 결과는 유사이차 반응속도식에 잘 따랐다. 흡착 메카니즘은 입자내 확산 모델에 의해 경막 확산과 입자내 확산의 두 단계로 평가되었다. 흡착공정에 대한 깁스 자유에너지, 엔탈피 및 엔트로피 변화와 같은 열역학 파라미터들이 평가되었다. 엔탈피 변화(48.49 kJ/mol)은 흡착공정이 물리흡착이고 흡열반응임을 알려주었다. 깁스 자유 에너지는 온도가 올라갈수록 감소하였기 때문에 흡착반응은 온도가 올라갈수록 자발성이 더 높아졌다. 등량흡착열은 흡착제 표면의 에너지 불균일성 때문에 흡착제와 흡착질 사이에 상호작용이 있음을 나타내었다.

• 상하수도학회지
• /
• 제20권3호
• /
• pp.389-395
• /
• 2006

The use of pine bark, a natural adsorbent prepared from Korean Red Pine (Pinus densifloral), was studied for its adsorption behavior of lead ion from aqueous solution. Adsorption experiments were carried out on lead ion concentrations of 10mg/L. Adsorption of lead ion could be described by both Langmuir and Freundlich adsorption isotherms. Treatment of the bark with nitric acid greatly increased initial adsorption rate, and equilibrium sorption capacity increased by approximately 48%. A pseudo second-order kinetic model fitted well for the kinetic behavior of lead ion adsorption onto the bark. Acid-treated bark demonstrated its adsorption capacity quite close to that of granular activated carbon. Results of this study indicated that ion exchange and chelation were involved in the adsorption process.

• 한국수처리학회지
• /
• 제26권6호
• /
• pp.143-152
• /
• 2018

The process parameters of ethyl violet from aqueous solution by activated carbon adsorption were carried out as a function of pH, temperature, contact time, initial concentration and temperature. The adsorption equilibrium data can be described well by the Langmuir and Freundlich isotherm models. Base on Langmuir constant ($R_L=0.0343{\sim}0.0523$) and Freundlich constant (1/n=0.1633~0.1974), This process could be employed as effective treatment for adsorption of ethyl violet. The kinetic experimental results showed that the adsorption process can be well described with the pseudo second order model. Based on the positive enthalpy (6.505 kJ/mol), the adsorption of ethyl violet onto granular activated carbon is endothermic. The negative Gibbs free energy (-1.169~-1.681 kJ/mol) obtained indicates that the adsorption process is spontaneous and physisorption.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제11권1호
• /
• pp.61-66
• /
• 2006

The simple Langmuir isotherm is frequently employed to describe the equilibrium behavior of protein adsorption on a wide variety of adsorbents. The two adjustable parameters of the Langmuir isotherm - the saturation capacity, or $q_m$, and the dissociation constant, $K_d$ - are usually estimated by fitting the isotherm equation to the equilibrium data acquired from batch equilibration experiments. In this study, we have evaluated the possibility of estimating $q_m$ and $K_d$ for the adsorption of bovine serum albumin to a cation exchanger using batch kinetic data. A rate model predicated on the kinetic form of the Langmuir isotherm, with three adjustable parameters ($q_m,\;K_d$, and a rate constant), was fitted to a single kinetic profile. The value of $q_m$ determined as the result of this approach was quantitatively consistent with the $q_m$ value derived from the traditional batch equilibrium data. However, the $K_d$ value could not be retrieved from the kinetic profile, as the model fit proved insensitive to this parameter. Sensitivity analysis provided significant insight into the identifiability of the three model parameters.

• 청정기술
• /
• 제17권2호
• /
• pp.97-102
• /
• 2011

입상활성탄에 의한 아마란스 염료의 흡착특성을 회분식 실험을 통해 조사하였다. 아마란스 염료의 흡착동력학적 연구는 298, 308, 318 K에서 초기농도 100, 200, 300 mg/L의 수용액을 가지고 수행하였다. 입상활성탄에 의한 아마란스 염료의 흡착 평형관계는 298K에서 Langmuir 등온식이 잘 적용되었다. 유사일차반응속도식과 유사이차반응속도식을 사용하여 동력학 실험값을 평가한 결과, 유사이차반응속도식이 더 잘 맞았으며, 속도상수($k_2$) 값은 아마란스 초기농도 100, 200, 300 mg/L 에 대해 각각 0.1076, 0.0531 및 0.0309 g/$mg{\cdot}h$로 조사되었다. 활성화에너지, 표준엔탈피, 표준엔트로피 및 표준자유에너지를 평가하였다. 조사된 표준자유에너지값은 초기농도 200 mg/L 에서 -5.08 ~ -8.10 kJ/mol로 자발적인 공정임을 알 수 있었다. 엔탈피변화량이 양의 값인 38.89 kJ/mol을 나타내어 활성탄에 대한 아마란스 염료의 흡착이 흡열반응으로 일어난다는 것을 알 수 있었다.

• 청정기술
• /
• 제20권3호
• /
• pp.290-297
• /
• 2014

본 연구에서는 활성탄을 사용하여 coomassi brilliant blue G (CBBG)염료를 흡착하는데 필요한 흡착평형과 흡착동역학 및 열역학 파라미터들에 대하여 조사하였다. 등온흡착평형관계로 부터 Langmuir 식과 Freundlich 식의 분리계수를 평가하여 활성탄에 의한 CBBG의 흡착조작이 유효한 처리방법이 될 수 있음을 알았고, Dubinin-Radushkevich 식으로부터 흡착공정이 물리흡착공정임을 알았다. 흡착공정에 대한 동력학적 해석을 통해 흡착반응은 유사이차반응속도식이 유사일차반응속 도식에 비해 일치도가 높은 것으로 나타났으며, 입자내확산이 흡착공정의 지배단계임을 알았다. 유사이차반응속도식을 적용한 열역학적 해석을 통해 평가된 엔탈피 변화값(406.12 kJ/mol)으로부터 흡착공정이 흡열반응으로 진행됨을 알았다. 또한 엔트로피 변화값(1.66 kJ/mol K)은 흡착공정의 무질서도가 증가한다는 것을 나타내었다. 온도가 올라갈수록 자유에너지 값이 감소하는 경향을 보인 것은 활성탄에 대한 CBBG의 흡착반응은 온도가 올라갈수록 자발성이 높아지는 것으로 판단되었다.

• 상하수도학회지
• /
• 제29권6호
• /
• pp.609-615
• /
• 2015

This study was carried out for characterization of MIO synthesized in our laboratory by co-precipitation method and applied isotherm and kinetic models for adsorption properties. XRD analysis were conducted to find crystal structure of synthesized MIO. Further SEM and XPS analysis was performed before and after phosphate adsorption, and BET analysis for surface characterization. Phosphate stock solution was prepared by KH2PO4 for characterization of phosphate adsorption, and batch experiment was conducted using 50 ml conical tube. Langmuir and Freundlich models were applied based on adsorption equilibrium test of MIO by initial phosphate solution. Pseudo first order and pseudo second order models were applied for interpretation of kinetic model by temperature. Surface area and pore size of MIO were found $89.6m^2/g$ and 16 nm respectively. And, the determination coefficient ($R^2$) value of Langmuir model was 0.9779, which was comparatively higher than that of Freundlich isotherm model 0.9340.

• Membrane and Water Treatment
• /
• 제9권2호
• /
• pp.79-85
• /
• 2018

In this work, batch adsorption of anionic dye acid green-25 (AG-25) from aqueous solution has been carried out at room temperature using anion exchange membrane (DF-120B) as a noval adsorbent. The effect of various experimental parameters such as contact time, membrane dosage, ionic strength and temperature on the adsorption of dye were investigated. Kinetic models namely pseudo-first-order, pseudo-second-order, Elovich, liquid film diffusion, Bangham and modified freundlich models were employed to evaluate the experimental data. Parameters like adsorption capacities, rate constant and related correlation coefficients for every model are calculated and discussed. It showed that adsorption of AG-25 onto DF-120B followed pseudo-first-order rate expression. Thermodynamic study indicates that adsorption of AG-25 onto DF-120B is an exothermic and spontaneous process.