• 공업화학
• /
• 제5권4호
• /
• pp.609-615
• /
• 1994

기체크로마토그래프에 직접 연결한 펄스 반응장치를 이용하여 10wt% $Ag/{\alpha}-Al_2O_3$ 촉매상에서 에틸렌 부분산화반응을 수행하였다. 산소가 분자흡착상태로 존재하기 어려운 실험온도에서 산소를 주입한 후 에틸렌을 주입하였을 때 산화에틸렌이 발생하였으며, 이 결과로부터 원자상태의 흡착산소가 산화에틸렌 생성에 관여함을 알 수 있었다. 흡착산소량과 몸체산소량을 감소시키면 산화에틸렌의 선택도는 감소하였다. 생성된 산화에틸렌은 에틸렌과 흡착산소로 분해되거나 아세트알데히드로 이성질화되었으나, 아세트알데히드로의 이성질화반응은 먼저 흡착된 산소에 의해서 크게 억제되었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.180-180
• /
• 1999

The interaction of oxygen with a Ni(100) surface has been investigated using X-ray Photoelectron Spectroscopy (XPS) and Near-Edge X-ray Absorption Fine Structure (NEXAFS) technique. Below 200L oxygen exposure, molecular oxygen was dissociated to atomic oxygen. Increasing oxygen exposure, -1s binding energy shifted from 531.0 eV to 533.0 eV due to molecular adsorption. The presence of molecular oxygen species was confirmed by NEXAFS. Molecular oxygen adsorbed on Ni(100) was oriented perpendicular to the surface. Upon heating over 150K molecular adsorbed oxygen surface was also analyzed using NEEXFS.

• Bulletin of the Korean Chemical Society
• /
• 제18권11호
• /
• pp.1175-1179
• /
• 1997

The adsorption of oxygen on ZnO was monitored by measuring the capacitance of two contacting crystals which have depletion layers originated from the interaction between oxygen and ZnO at 298 K-473 K. An admission of oxygen to the sample induced an irreversible increase in the depth and the amount of adsorbed oxygen was less than 0.001 monolayer in the experimental condition. The relation between pressure of oxygen and variation of the depth was tested from the view point of Langmuir or Freundlich isotherm. Using Hall effect measurement and kinetic experiment, a model equation on the adsorption process was proposed. From the results, it was suggested that oxygen adsorption depended on the rate of electron transfer from ZnO to oxygen while the amount of adsorbed oxygen was kinetically restricted by the height of surface potential barrier.

• Nuclear Engineering and Technology
• /
• 제45권2호
• /
• pp.211-218
• /
• 2013

Large quantities of irradiated graphite waste from graphite-moderated nuclear reactors exist and are expected to increase in the case of High Temperature Reactor (HTR) deployment [1,2]. This situation indicates the need for a graphite waste management strategy. Of greatest concern for long-term disposal of irradiated graphite is carbon-14 ($^{14}C$), with a half-life of 5730 years. Fachinger et al. [2] have demonstrated that thermal treatment of irradiated graphite removes a significant fraction of the $^{14}C$, which tends to be concentrated on the graphite surface. During thermal treatment, graphite surface carbon atoms interact with naturally adsorbed oxygen complexes to create $CO_x$ gases, i.e. "gasify" graphite. The effectiveness of this process is highly dependent on the availability of adsorbed oxygen compounds. The quantity and form of adsorbed oxygen complexes in pre- and post-irradiated graphite were studied using Time of Flight Secondary Ion Mass Spectrometry (ToF-SIMS) and Xray Photoelectron Spectroscopy (XPS) in an effort to better understand the gasification process and to apply that understanding to process optimization. Adsorbed oxygen fragments were detected on both irradiated and unirradiated graphite; however, carbon-oxygen bonds were identified only on the irradiated material. This difference is likely due to a large number of carbon active sites associated with the higher lattice disorder resulting from irradiation. Results of XPS analysis also indicated the potential bonding structures of the oxygen fragments removed during surface impingement. Ester- and carboxyl-like structures were predominant among the identified oxygen-containing fragments. The indicated structures are consistent with those characterized by Fanning and Vannice [3] and later incorporated into an oxidation kinetics model by El-Genk and Tournier [4]. Based on the predicted desorption mechanisms of carbon oxides from the identified compounds, it is expected that a majority of the graphite should gasify as carbon monoxide (CO) rather than carbon dioxide ($CO_2$). Therefore, to optimize the efficiency of thermal treatment the graphite should be heated to temperatures above the surface decomposition temperature increasing the evolution of CO [4].

• Bulletin of the Korean Chemical Society
• /
• 제8권5호
• /
• pp.358-362
• /
• 1987

The interaction of oxygen with polycrystalline nickel surface has been studied by investigating the X-ray photoelectron spectra of O 1s, Ni $2p_{3/2}$, and their valence band electrons. By comparing the oxygen exposure of this work with the reported results of LEED, AES, and work function measurements, it is found that the atomic oxygen, adsorbed dissociatively in the initial stage of exposure, is responsible for a p(2 ${\times}$ 2) structure and a subsequent c(2 ${\times}$ 2) structure on the Ni(100) surface. This dissociatively adsorbed oxygen species forms surface NiO layer subsequently on further oxygen exposure. The NiO layer is more easily formed with the increasing temperature. Non-stoichiometric oxygen species is also found to accompany the NiO layer. It appears prior to the formation of bulk NiO at all of the temperatures of this work except at 523K.

• 한국재료학회지
• /
• 제11권10호
• /
• pp.895-899
• /
• 2001

Electrical properties of porous $BaTiO_3-based$ ceramics were investigated from the viewpoint of adsorbed oxygen. Namely, the effects of heat-treatment temperature ($450-600^{\circ}C$) and measuring atmosphere (oxygen and nitrogen) on the PTCR characteristics of the porous $BaTiO_3-based$ ceramics were investigated. It was found that the PTCR characteristics of the porous $BaTiO_3-based$ ceramics was developed at $\geq$55$0^{\circ}C$, and the magnitude of the PTCR characteristics increased with increasing heat-treatment temperature. It was also found that the magnitude of the PTCR characteristics in the porous $BaTiO_3-based$ ceramics increased in oxygen atmosphere, whereas decreased in nitrogen atmosphere during heating and cooling.

• 한국재료학회지
• /
• 제18권6호
• /
• pp.313-317
• /
• 2008

[ $LaFeO_3$ ] powders were synthesized using a method involving solution combustion, and the surface properties of these powders were examined by x-ray photoelectron spectroscopy. As the amount of fuel increased during the synthesis, the $LaFeO_3$ powders became amorphous with a large plate-like shape. It was found that the O 1s spectra were composed of two types of photoelectrons by deconvolutioning the spectra. Photoelectrons with higher binding energy come from adsorbed oxygen ($O^-$) whereas those with lower energy come from lattice oxygen ($O^{2-}$). The ratio of adsorbed and lattice oxygen increased as the ratio of the fuel and nitrate (${\Phi}$) increased. The binding energy of both types of oxygen increased as ${\Phi}$ increased due to the formation of carbonates.

• Bulletin of the Korean Chemical Society
• /
• 제18권2호
• /
• pp.149-151
• /
• 1997

Barrier height on the surface was monitored at 77 K by observing the inflection of V-I characteristics of ZnO(1010)-ZnO(1010) contact in the surface reaction of oxygen species with carbon monoxide. The contact showed inflections at 10-20 mV and 10-50 mV for the sample adsorbed oxygen at 298 K and 573 K, respectively. When the sample adsorbed oxygen at 573 K was exposed to carbon monoxide at 298 K and 573 K, inflections were observed at 10-40 mV and 10-30 mV, respectively. The results indicated that the adsorption of oxygen on ZnO increased the surface barrier height, and the reaction of carbon monoxide with the oxygen-preadsorbed (at 573 K) ZnO decreased the surface barrier height.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1997년도 제12회 학술발표회 논문개요집
• /
• pp.166-166
• /
• 1997

• 공업화학
• /
• 제5권2호
• /
• pp.189-198
• /
• 1994

초고진공하에서 열탈착 실험에 의하여 오산화바나듐 촉매상에서 일산화탄소와 메탄올의 홉착특성을 연구하였다. 일산화탄소는 오산화바나듐 촉매표면의 격자산소 결함을 갖는 바나듐이온이나 바나듐이온에 결합된 이중결합성 산소에 흡착하였다. 격자산소 결함을 갖는 바나듐이온에 흡착한 일산화탄소는 380K에서 탈착되었으며, 바나듐이온에 결합된 이중결합성 산소에 흡착한 일산화탄소는 격자산소와 결합하여 탄산기의 형태를 형성한 후 이산화탄소로 탈착되면서 촉매 표면을 환원시켰다. 선흡착되거나 후흡착되는 산소에 의하여, 탄산기의 형태로 흡착하는 일산화탄소의 흡착량은 증가하였다. 오산화바나듐 촉매상에서 메탄올을 흡착시킨 후 메탄올, 포름알데히드, 일산화탄소, 수소 등의 열탈착실험에 의하여 메탄올의 흡착특성을 연구하였다. 메탄올은 298 K에서 오산화바나듐 촉매상에 methoxy와 hydroxyl기를 형성하면서 분해흡착하였다.