• Tribology and Lubricants
• /
• v.19 no.5
• /
• pp.245-250
• /
• 2003

Water is known to playa crucial role on friction of moving parts in nanoscale contact. Little is, however, known about the tribological behavior of a solid surface that is covered with water adsorption layer. The objective of this study is to investigate the nanotribological behavior of the water layer in relation to water affinity of the surface and relative humidity. This paper presents an examination of the frictional behavior of water adsorption layer as 'confined liquid film'. It is shown that the friction is inversely proportional to the hydrophilicity of surface and relative humidity. On the other hand, friction of hydrophobic surface is not influenced by relative humidity. A model is proposed for the water-mediated contact in which it is shown that the water layer between two hydrophilic surfaces with high relative humidity behaves as a lubricant.

• Tribology and Lubricants
• /
• v.17 no.3
• /
• pp.171-178
• /
• 2001

In order to elucidate the lubricating mechanism of polyolester base oils [POEs], the wear characteristics of 27 kinds of polyolester base oils including mixed POEs were investigated. Their wear results were discussed in terms of the effect of molecular structure on wear performance and compared with those of mineral oil. In addition, the adsorption ability of POEs to reduced iron and their hydrolysis rates were measured and the effect of their molecular structures on the adsorptivity and hydrolysis rate of POEs was discussed, respectively. Finally, the lubricating mechanism anlyzed from these results of wear characteristics, adsorptivity and hydrolysis rate was proposed. That is to say, POEs are firstly adsorbed to friction surface and decomposed by hydrolysis or thermal degradation. Fatty acids obtained by degradation of POEs form adsorption film on friction surface. The larger become cohesive ability among fatty acid molecules in the adsorption film, the better gets the wear performance of POEs.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.3
• /
• pp.136-138
• /
• 2014

In this study, cholesterol sensors consisting of a mixture of cholesterol oxidase (ChOx) and zinc oxide (ZnO) nanoparticles (NPs) are constructed on plastic substrates and their sensing characteristics are examined in air. The current of the ChOx-ZnO NP film decreases in magnitude as cholesterol molecules are adsorbed on the film, due to the resulting increase in the number of electrons generated by the reaction between the cholesterol and the ChOx. The cholesterol sensor shows a high sensitivity of $1.08{\mu}A/mM$ and a wide detection range from 10 nM to 1 mM.

• Journal of the Korean institute of surface engineering
• /
• v.29 no.5
• /
• pp.407-414
• /
• 1996

We have investigated the effects of H atoms on thin film growth processes and surface reactions. In the oxidation of Si, Si surfaces are passivated against the $O_2$ adsorption by terminating dangling bonds with H atoms. Moreover, the existence of Si-H bonds on Si(100) surfaces enhances the structural relaxation of Si-O-Si bonds due to a charge transfer from Si-Si back bonds. In the heteroepitaxial growth of a Si/Ge/Si(100) system, H atoms suppress the segregation of Ge atoms into Si overlayers since the exchange of Ge atoms with Si atoms bound with H must be accompanied with breaking of Si-H bonds. However, 3-dimensional island growth is also promoted by atomic H irradiation, which is considered to result from the suppression of surface migration of adsorbed reaction species and from the lowering of step energies by the H termination of dangling bonds.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.2
• /
• pp.45-49
• /
• 1999

A flammable gas sensor based on the $SnO_2$thin film deposited by the reactive ion assisted deposition was fabricated and ultra-thin Pd layer as catalyst was adsorbed at surface by ion beam sputtering. The initial oxidation states of Pd catalyst were controlled to investigate the role of Pd in the sensing process of inflammale gas sensor through annealing in air and vacuum respectively. The Pd catalyst existing in pure metallic state showed the sensitivity higher than that of PdO. The result might be closely related to the fact that PdO as a surface acceptor would receive electrons via Pd sub-channel from $SnO_2$, and thus which reduces the sensitivity and delay the response time.

• Korean Journal of Materials Research
• /
• v.20 no.9
• /
• pp.463-466
• /
• 2010

We studied the initial reaction mechanism of Zn precursors, namely, di-methylzinc ($Zn(CH_3)_2$, DMZ) and diethylzinc ($Zn(C_2H_5)_2$, DEZ), for zinc oxide thin-film growth on a Si (001) surface using density functional theory. We calculated the migration and reaction energy barriers for DMZ and DEZ on a fully hydroxylized Si (001) surface. The Zn atom of DMZ or DEZ was adsorbed on an O atom of a hydroxyl (-OH) due to the lone pair electrons of the O atom on the Si (001) surface. The adsorbed DMZ or DEZ migrated to all available surface sites, and rotated on the O atom with low energy barriers in the range of 0.00-0.13 eV. We considered the DMZ or DEZ reaction at all available surface sites. The rotated and migrated DMZs reacted with the nearest -OH to produce a uni-methylzinc ($-ZnCH_3$, UMZ) group and methane ($CH_4$) with energy barriers in the range of 0.53-0.78 eV. In the case of the DEZs, smaller energy barriers in the range of 0.21-0.35 eV were needed for its reaction to produce a uni-ethylzinc ($-ZnC_2H_5$, UEZ) group and ethane ($C_2H_6$). Therefore, DEZ is preferred to DMZ due to its lower energy barrier for the surface reaction.

• KSBB Journal
• /
• v.15 no.6
• /
• pp.594-599
• /
• 2000

The adsorption of the antimicrobial agents and their heat-resistance were investigated for the packaging film manufacture, wherein, the antimicrobial agents were adsorbed on a ceramic component. The naturally sourced antimicrobial agents were produced by methylotropic actinomycetes strains MO-16 and MO-17, extracted with ethylacetate. Antimicrobial action was stable to $121^{\circ}C$ and 1 atm. for 30 min., showing wide-ranging activity to the Gram(+) and the Gram(-) bacteria. Antimicrobial agents, adsorbed on ceramic Ce-1, retained activity to the Gram(+) and the Gram(-) species at $105^{\circ}C$ and $230^{\circ}C$ heat treatment, and methanol extracted antimicrobial agents from Ce-1 treated at $230^{\circ}C$ for 30min., retained activity to Gram(+) bacteria. In the presence of oxygen during the heat treatment process, antimicrobial agents adsorbed on ceramic Ce-1 showed antimicrobial activity to Gram(+) and the Gram(-) bacteria.

• Korea-Australia Rheology Journal
• /
• v.15 no.1
• /
• pp.1-7
• /
• 2003

A new method is introduced to build up organic/organic multilayer films composed of cationic poly(allylamine hydrochloride) (PAH) and negatively charged poly (sodium 4-styrenesulfonate) (PSS) using the spinning process. The adsorption process is governed by both the viscous force induced by fast solvent elimination and the electrostatic interaction between oppositely charged species. On the other hand, the centrifugal and air shear forces applied by the spinning process significantly enhances desorption of weakly bound polyelectrolyte chains and also induce the planarization of the adsorbed polyelectrolyte layer. The film thickness per bilayer adsorbed by the conventional dipping process and the spinning process was found to be about 4 ${\AA}$ and 24 ${\AA}$, respectively. The surface of the multilayer films prepared with the spinning process is quite homogeneous and smooth. Also, a new approach to create multilayer ultrathin films with well-defined micropatterns in a short process time is Introduced. To achieve such micropatterns with high line resolution in organic multilayer films, microfluidic channels were combined with the convective self-assembly process employing both hydrogen bonding and electrostatic intermolecular interactions. The channels were initially filled with polymer solution by capillary pressure and the residual solution was then removed by the .spinning process.

• Applied Chemistry for Engineering
• /
• v.2 no.4
• /
• pp.311-329
• /
• 1991

Electrochemical behavior of surface active Osmium bipyridine complex adsorbed in a monomolecular layer on tin oxide electrodes by the Langmuir-Blodgett method was studied. Theoretical equation of cyclic voltammetry of electrode reactions for redox species adsorbed as monolayer form was discussed by reversible and quasi-reversible waves. The film was transferred onto the $SnO_2$ electrode surface and then amounts of charge on the electrode were measured in the technique of cyclic voltammetry. The electron transfer mediation of these monolayer with $Fe^{2+}$, TEMPOL and others were studied. And the cyclic voltammetry were simulated by taking into account the interaction parameters. From these values, we found it possible to fit almost all measured cyclic voltammograms with these parameters. The recent works and directions using LB method were introduced with various applicable field.

• Journal of the Korean Electrochemical Society
• /
• v.10 no.2
• /
• pp.73-81
• /
• 2007

This review article considered the electrochemical reduction of uranyl ions on a Pt surface. Specifically, we focussed on the improvement in its reduction current efficiency. First, this article briefly explained the fundamentals of the reduction of uranyl ($UO_2^{2+}$) ions on a Pt surface. Namely, they involved the electrochemical behaviour of uranium species, and electrochemical cell configurations for the reduction of $UO_2^{2+}$ ions. In addition, the effects of adsorbed hydrogen atoms were investigated on the reduction of $UO_2^{2+}$ ions. Finally, this article presented the methods for improving current efficiency of the reduction of $UO_2^{2+}$ ions on a Pt surface. Three different kinds of methods are introduced, which include electrochemical surface treatments of Pt electrode involving hydrogenation and anodisation, the use of catalyst poisons, and formation of thin mercury film on a Pt electrode. Moreover, this article provided some clues about how hydrogenation and catalyst poisons work on the reduction of $UO_2^{2+}$ ions.