• Wind and Structures
• /
• 제13권3호
• /
• pp.293-307
• /
• 2010

This paper describes a new method for the estimation of six complex aerodynamic admittance functions. The aerodynamic admittance functions relate buffeting forces to the incoming wind turbulent components, of which the estimation accuracy affects the prediction accuracy of the buffeting response of long-span bridges. There should be two aerodynamic admittance functions corresponding to the longitudinal and vertical turbulent components, respectively, for each gust buffeting force. Therefore, there are six aerodynamic admittance functions in all for the three buffeting forces. Sears function is a complex theoretical expression for the aerodynamic admittance function for a thin airfoil. Similarly, the aerodynamic admittance functions for a bridge deck should also be complex functions. This paper presents a separated frequency-by-frequency method for estimating the six complex aerodynamic admittance functions. A new experimental methodology using an active turbulence generator is developed to measure simultaneously all the six complex aerodynamic admittance functions. Wind tunnel tests of a thin plate model and a streamlined bridge section model are conducted in turbulent flow. The six complex aerodynamic admittance functions, determined by the developed methodology are compared with the Sears functions and Davenport's formula.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.403-406
• /
• 2004

In this paper, the design of damped structures associated with the piezoelectric shunt circuits is undertaken and it is applied to optical disk drive (O.D.D) main base in order to reduce unwanted vibration. In order to design effective piezoelectric structure, the admittance of the structure is introduced as the performance index of the piezoelectric shunt system. And the admittance offset of the shunt performance is theoretically investigated. It is also presented that the admittance can be calculated by commercial finite elements program. To verify the admittance calculated by F.E.M, admittance measurement is performed by impedance analyzer. In this verifying process, the validity of the finite element admittance analysis is found. As a practical approach, to reduce the vibration of the O.D.D. main base, piezoelectric shunt system is designed using the proposed admittance analysis and shunt effect is evaluated at all prescribed frequencies.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1982-1984
• /
• 2002

The admittance of one-port electrostatic actuator are modeled using the steady-state sinusoidal response. Also the admittance of the differential type actuator is derived taking the practical conditions into consideration, although it has no admittance in ideal case. It is a function of biasing error, driving error, and capacitive mismatch including parasitic capacitors. The validity of the admittance model is proved by comparing between the modeled and measured admittances. The distortion in the frequency response curve measured by a capacitive sensor is analyzed and it is concluded that the admittance is the main cause of this distortion.

• 정보저장시스템학회:학술대회논문집
• /
• 정보저장시스템학회 2005년도 추계학술대회 논문집
• /
• pp.235-240
• /
• 2005

In this paper, vibration suppression of a CD-ROM main base with piezoelectric shunt circuit is studied. Admittance is introduced to predict the performance of piezoelectric shunt damping. Numerical admittance obtained by commercial finite element code, ANSYS, correlates well with experimentally measured one. Multi-mode piezoelectric shunt damping is realized based on the target mode and frequencies obtained by the admittance analysis. Experimental results prove that admittance of the piezoelectric structure is capable of predicting the performance of piezoelectric shunt damping and the vibration of the main base with the piezoelectric patches is reduced effectively.

• 정보저장시스템학회논문집
• /
• 제2권1호
• /
• pp.7-12
• /
• 2006

In this paper, vibration suppression of a CD-ROM main base with piezoelectric shunt circuit is studied. Admittance is introduced to predict the performance of piezoelectric shunt damping. Numerical admittance obtained by commercial finite element code, ANSYS, correlates well with experimentally measured one. Multi-mode piezoelectric shunt damping is realized based on the target mode and frequencies obtained by the admittance analysis. Experimental results prove that admittance of the piezoelectric structure is capable of predicting the performance of piezoelectric shunt damping and the vibration of the main base with the piezoelectric patches is reduced effectively.

• 대한토목학회논문집
• /
• 제31권2A호
• /
• pp.97-104
• /
• 2011

본 연구에서는 교량 현장에서 계측한 풍속 스펙트럼을 풍동에서 구현하고, 콘크리트 사장교를 대상으로 공력 어드미턴스함수를 측정하였다. 그리고 현장 측정한 난류 특성을 바탕으로 콘크리트 사장교의 3차원 버페팅 해석을 수행하였다. 본 연구의 결과를 보면 적절히 공력 어드미턴스함수를 고려할 경우에 고려하지 않은 경우보다 버페팅 응답이 절반 가까이 줄어드는 것으로 나타났다. 그리고 격자난류를 사용할 경우에 저주파 영역에서 공력 어드미턴스 함수가 낮아서 풍하중을 과소평가할 가능성이 있는 것으로 나타났다. 공력 어드미턴스 함수가 버페팅 응답에 미치는 영향이 상당하므로 향후 교량의 버페팅 해석시 플러터계수나 능동난류로부터 추출한 공력 어드미턴스 함수를 사용할 것을 추천한다.

• 대한기계학회논문집A
• /
• 제39권1호
• /
• pp.37-43
• /
• 2015

압전소자(Piezoelectric transducer, PZT)는 구조물의 안정성 평가를 목적으로 하는 구조 건전성 모니터링 기법(Structural Health Monitoring, SHM)의 센서(sensor) 및 구동기(actuator)로 많이 활용되고 있다. 사용되는 센서 및 구동기의 성능을 사전에 파악하고, 잔존수명 및 결함을 탐지하는 센서 자가 진단법은 안정적인 SHM의 결과를 얻기 위해 매우 중요한 절차이다. 본 연구에서는 Admittance 값을 기반으로 한 센서 자가 진단절차를 통하여 압전체 센서의 결함을 탐지하였으며, 센서 진단과정에 영향을 줄 수 있는 접합층 및 온도 등의 영향인자에 대해 실험적 분석을 실시하였다. 분석 결과 Admittance와 온도 및 접착제의 상관관계를 파악할 수 있었으며, admittance를 기반으로 한 센서 자가 진단 절차를 통해 센서의 접착상태와 접착제의 성능평가가 가능함을 검증하였다.

• 한국소음진동공학회논문집
• /
• 제14권4호
• /
• pp.303-309
• /
• 2004

Absorptive material arrangement method for effective interior noise control is proposed. Sound field with arbitrary boundary condition is formulated by Kirchhoff-Helmholtz integral equation. A simple example such as a rectangular cavity will present physical meaning between changing boundary condition and control of sound field. The effect of changing boundary condition is expressed in modal admittance. From this formulation. an admittance map is presented. The admittance map is the figure to represent position where absorptive material is attached for effective interior noise control. The admittance map can be assigned to each resonant frequency. There. however, may be common area of those maps. Then, frequency robust arrangement of absorptive material in noise control will be presented.

• The Korean Journal of Ceramics
• /
• 제4권2호
• /
• pp.122-127
• /
• 1998

Conductivities of polycrystalline ceria doped with several rare earth oxides were measured by AC admittance and DC four probe method. The conductions were separated into grain and grain boundary contributions using the complex admittance technique as well as grain size dependence of conductivity. The grain size dependence of polycrystalline conductivity, which can be adequately described by the so-called brick layer model, appears to give a more reliable measure of the grain conductivity compared to the complex admittance method. Polycrystalline resistivity(1/conductivity) increases linearly with the reciprocal of grain size. The intercept of resistivity vs. inverse grain size plot gives a measure of the grain resistivity and the slope gives a measure of the grain boundary resistivity. It was also noted that errors involved in the analysis of experimental data may be different between the complex admittance method and the impedance method. A greater resolution of the spectra was found in the complex admittance method, insofar as the present work is concerned, suggesting that the commonly used equivalent circuit may require re-evaluation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.171.3-171
• /
• 2001

The master/slave-combined system has a simplified and miniaturized structure formed by combining the master and slave that are the teleoperation system. In a certain situation, the operator may want to feel the magnified/reduced admittance of the real environments. Or he may want to feel the specific predefined admittance of the virtual environments. This paper presents a force feedback control structure for the master/slave-combined system. Through the proposed control structure, the operator can feel the predefined admittance of the virtual environments in case of free motion, and the magnified/reduced admittance of real environments in case of contact situation. It is discussed how the elements of the admittance effect ...