• Korean Journal of Remote Sensing
• /
• v.34 no.2_1
• /
• pp.249-265
• /
• 2018

The Korea Meteorological Administration has been operating wind profiler at 9 stations since the year of 2007. Among these stations, Bukgangneung is the only one that produces regularly both rawinsonde and wind profiler wind measurements at the same time. In this study, wind profiler measurements were compared with rawinsonde wind at Bukgangneung. Unlike most other studies which have used the temporal measurements for several days in summer season, in this study the routine rawinsonde measurments during almost one year (2016) were employed for the accuracy test of the wind. The monthly mean maximum observation height in Bukgangneung shows a large seasonal variation; it was relatively high in summer (4,310 m in July) and low in winter (2,130 m in December). The vertical observation rates at the altitude above these heights were less than 50%. The monthly and vertical wind comparison between rawinsonde and wind profiler shows that absolute bias and RMSE of zonal and meridional wind velocity are mostly less than 1 m/s and less than 2 m/s, respectively. In winter season the RMSE of wind velocity increased to 2~3 m/s. However, at some high altitudes and certain months, large errors were found. It is shown that these errors were related with very weak wind (less than 1 m/s) of wind profiler at 3,500~4,000 m from January to May and dramatic changes of wind the height of 1,500~2,500 m for in April. For Snow events the errors were lower than those for the winter season and for the heavy rain events the errors increased to 3~4 m/s at the height of 4~5 km.

• IE interfaces
• /
• v.21 no.1
• /
• pp.75-84
• /
• 2008

It is a difficult task for decision makers(DMs) to choose an appropriate release plan which balances the conflicts between water storage and hydro-electric energy generation in a multi-reservoir operation problem. In this study, we proposed a DEA-based ranking procedure by which the DM can rank the potential alternatives and select the best solution among the Pareto-optimal solutions. The proposed procedure can resolve the problem of mix inefficiency that may cause errors in measuring the efficiency of alternatives. We applied the proposed procedure to the multi-reservoir operation problem for the Geum-River basin and could choose the best efficient solution from the Pareto-set which were generated by the Coordinated Multi-Reservoir Operating Model.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1995.04a
• /
• pp.59-64
• /
• 1995

The impediment in enhancing the ship safety and combating vessel-source marine pollution depends on the combination of the immediate and mediate factors. The former is mainly caused by human errors and failure in compliance with the international convention standards in operation of compliance with the international convention standards in operation of vessel. The latter by the attitudes and activities of some of the flay states taking little responsibilities with appropriate seriousness in policing their fleets due to the lack of implementing capability of adminstrations. So long as there exists a large size of variation in implementing capability of administration between flag states a globally remarked progress cannot expect to be made in assuring the ship safety and preventing the vessel-source pollution Therefore a new regulatory regime is suggested to be adopted by IMO to maintain high standard flag state adminstrations by recommending standard paradigm to member states so that the development of a implementing culture is encouraged and supported.

• International Journal of Precision Engineering and Manufacturing
• /
• v.6 no.2
• /
• pp.12-18
• /
• 2005

A geometric compensation of thin-walled molded parts in reverse engineering is presented. Researches in reverse engineering have focused on the fitting of points to curves and surfaces. However, the reconstructed model is not the geometric model because the molded parts have some dimensional errors in measurements and deformation during molding. Geometric information can give an improved accuracy in reverse engineering. Thus, measurement data must be compensated with geometric information to reconstruct the mathematical model. The functional and geometric concepts of the part can be derived from geometric information. LSM (Least square method) is adopted to determine the geometric information. Also, an example of geometric compensation is given to improve the accuracy of geometric model and to inspect the reconstructed model.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.34 no.4
• /
• pp.57-65
• /
• 2011

Monitoring auto correlated processes is prevalent in recent manufacturing environments. As a proactive control for manufacturing processes is emphasized especially in the semiconductor industry, it is natural to monitor real-time status of equipment through sensor rather than resultant output status of the processes. Equipment's sensor data show various forms of correlation features. Among them, considerable amount of sensor data, statistically autocorrelated, is well represented by Box-Jenkins autoregressive moving average (ARMA) model. In this paper, we present a design method of statistical process control (SPC) used for monitoring processes represented by the ARMA model. The proposed method shows benefits in the power of detecting process changes, and considers robustness to ARMA modeling errors simultaneously. We prove benefits through Monte carlo simulation-based investigations.

• International Journal of Advanced Culture Technology
• /
• v.10 no.4
• /
• pp.190-197
• /
• 2022

The purpose of this study is to investigate the effect of consumer's authenticity perception on brand repurchase intention and word-of-mouth intention through customer satisfaction and brand attachment. For this purpose, a structural equation model was established based on previous studies and an empirical study was conducted. The survey was conducted offline and online, and samples were collected using a convenient sampling method. A total of 267 questionnaires were sampled, and 255 questionnaires were used as final valid samples, except for 12 questionnaires with errors. For the final data, SPSS Win ver. 23.0 and AMOS 20.0 statistical programs were used to analyze the personal characteristics of the subjects, verify the research model, and confirm the reliability and validity of the measurement model and the suitability of the research model.As a result, all six hypotheses were adopted, and the correlation between each factor was observed in the research model.

• Atmosphere
• /
• v.24 no.3
• /
• pp.391-402
• /
• 2014

This study investigated the performances of precipitable water vapor (PWV) retrieval from the sets of ground global positioning system (GPS) signals, each of which had different length of observing-session duration, for the purpose of obtaining as short session duration as possible that is required at the least for appropriate retrieval of the PWV for meteorological usage. The shorter duration is highly desirable to make the most use of the GPS instrument on board the mobile observation vehicle making measurements place by place. First, using Bernese 5.0 software the PWV retrieval was conducted with the data sets of GPS signals archived continuously in 30 seconds interval during 2-month period of January and February, 2012 at Bukgangneung site. Each of the PWVs produced independently using different session durations was compared to that of radio-sonde launched at the same GPS location, a Bukgangneung site. Second, the same procedure was done using the data sets obtained from the mobile observation vehicle that was operating at Boseong area in Jeonnam province during Changma observation campaign in 2013, and the results were compared to that at Bukgangneung site. The results showed that as the observing-session duration increased the retrieval errors decreased with the dramatic change happening between 3 and 4 hours of the duration. On average, the root mean square error (RMSE) of the retrieved PWV was around 1 mm for the durations of greater than 4 hours. The results at both the Bukgangneung (fixed site) and Boseong (mobile vehicle) seemed to be fairly comparable with each other. From this study it is believed that at least 4 hours of observing-session duration is needed for the retrieval of PWV from the ground GPS for meteorological usage using Bernese 5.0 software.

• Journal of Korean Society of Rural Planning
• /
• v.23 no.1
• /
• pp.53-63
• /
• 2017

Although some indicators for evaluating rural settlement conditions have been offered, these indicators could not reflect unique characteristics that rural has its own peculiarities. The rural area is identified with central districts functioned as service provision and hinterlands used its service. The aim of this study is to find a central district of rural villages and define range of its hinterlands using various physical characteristics of rural areas. Targeting areas are Yongsan and Hwanggan in Yeongdong-gun. The physical characteristics are represented by building density, number of shops among secondary and tertiary industries, official land price, and density of bus line. The rural central district is estimated by linear programming using defined the physical characteristics. Also its hinterlands used Huff model and social accessibility. The results of this study are as follows; (1) The physical characteristics in Hwanggan myeon is higher than Yongsan myeon because Hwanggan area has a large floating population for using Hwanggan station and ticket office; (2) The central district in Hwanggan has wider regional range than Yongsan. When central district estimate in rural areas, we suggest a grid diameter of Hexagon for controlling errors; (3) Considering accessibility, the life zone of 4 districts defined legally in Hwanggan use Yongsan and 2 legal districts in Hwanggan are possible to take advantage of Yongsan's life zone; (4) The results of survey targeting boundary villages between Yongsan and Hwanggan, individual drivers use central districts both Yongsan and Hwanggan, however users by public transportation (especially bus) go more to Hwanggan because bus lines to Hwanggan have many routes than to Yongsan. Evaluating the rural settlement conditions by national unit through grasping central districts and its hinterlands, these results can use as base line data and the evidence for regional development projects.

• Journal of the Korean earth science society
• /
• v.42 no.2
• /
• pp.135-148
• /
• 2021

The purpose of this study was to evaluate the urban heat island (UHI) intensity and the corresponding surface temperature forecast obtained using the local data assimilation and prediction system (LDAPS) of the Korea Meteorological Administration (KMA) against the AWS observation. The observed UHI intensity in Seoul increases during spring and winter, while it decreases during summer. It is found that the diurnal variability of the UHI intensity peaks at dawn but reaches a minimum in the afternoon. The LDAPS overestimates the UHI intensity in summer but underestimates it in winter. In particular, the model tends to overestimate the UHI intensity during the daytime in summer but underestimate it during the nighttime in winter. Moreover, surface temperature errors decrease in summer but increase in winter. The underestimation of the winter UHI intensity appears to be associated with weak forecasting of urban temperature in winter. However, the overestimated summer UHI intensity results from the underestimation of the suburban temperature forecast in summer. In order to improve the predictability of the UHI intensity, an urban canopy model (MORUSES) that considers urban effects was combined with LDAPS and used for simulation for the summer of 2017. The surface temperature forecast for the city was improved significantly by adopting MORUSES, and there were remarkable improvements in urban surface temperature morning forecasts. The urban canopy model produced an improvement effect that weakened the intensity of the UHI, which showed an overestimation during summer.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.2
• /
• pp.33-42
• /
• 2018

The Patient Safety Act was enacted on July 26, 2016. Patient safety law is a method to prevent harm by collecting and accumulating various errors through the reporting system. Therefore, in order for this law to be successfully implemented, it is necessary to vitalize 'the autonomous reporting and reporting learning system of patient safety accidents'. And In order for this system to be activated, a large amount of reporting data accumulation is a prerequisite. Nevertheless, there were only two reports in about 17 months. In this paper, I will criticize the validity of the current autonomous reporting system and the two proposed amendments, I would like to propose the introduction of a partial obligation reporting system.